Titan Skid Steer to PTO 3 Point Adapter Review | Titan Attachments

Подписаться 19 тыс.

Просмотров 20 тыс.

50% 1

I bought this (amzn.to/3zvGfaa) SKID STEER TO PTO ADAPTER from Titan and tested it on my skid steer with my 3pt shredder. See how it did.
#skidsteerto3pt, #skidsteerpto, #skidsteer, #3ptadapter, #skidsteertotractor
Skidsteer 3 Point Attachment Adapter : amzn.to/3zvGfaa
Product Overview
The Skid Steer to PTO Adapter from Titan Attachments™ is designed to allow you to run your 3-Pt agricultural attachments with your skid steer. Simply attach this unit to your skid steer, connect your hydraulic hoses, hook-up your Cat 1 3-Point attachment to the unit, and away you go. The adjustable top link bar and quick attach lower link allows you to hook-up and detach in a flash, saving you to time on switching attachments. The PTO shaft is powered by a hydraulic motor with a flow rate of 14 - 20 GPM for a power output of 17 - 20 HP and a shaft speed of 520 - 750 RPM.
Features:
- Now you can run agricultural attachments without having to own or rent a tractor!
- Designed to give your skid steer the ability to run 3-Pt agricultural attachments.
- Heavy duty steel construction with a static load capacity 8,000 KG / 17,600 LB.
- Towing capacity of 10 Metric Tons / 22,000 LB to handle even the heaviest attachments.
- Adjustable top link bar and quick attach lower links for easily switching attachments.
Specifications:
- Overall Width: 46"
- Overall Length: 36"
- Overall Height: 27"
- Lower Link Spread: 30"
- Lower Link Inner Dimension: 28"
- Flow Rate: 14 - 20 GPM
- Shaft Speed: 520 - 750 RPM
- Power Output: 17 - 20 HP
- Static Load Capacity: 8,000 KG | 17,600 LB
- Towing Capacity: 10 Metric Tons | 22,000 LB
- Hydraulic Connection: Flat Faced Couplers Included
- Weight: 328 LB
Other tags...
Using Tractor Implements on a Skid Steer, Eterra Motorized Quick Hitch 3-Point Adapter with Tiller Attachment, skid steer, skid steer attachments, skid steer attachment, skid steer solutions, bobcat, case, caterpillar, john deere, jcb, takeuchi, terex, new holland, mustang, everything attachments, skid pro, quick attach, skid steer 3-point adapter, skid steer tiller, skid steer tiller attachment, Eterra Skid Steer 3-Point runs a Brush Hog, terex, new holland, skid steer brush hog, auger, rototiller, mustang, skid steer, skeleton bucket, jcb, everything attachments, skid steer solutions, Eterra, takeuchi, caterpillar, bobcat, case, skid steer attachment, john deere, skid pro, quick attach, skid steer attachments, skid steer 3-point hitch adapter with pto, Skid Steer to pto 3 point adapter, skid steer, skid steer attachments, skid steer attachment, skid steer solutions, bobcat, case, caterpillar, john deere, jcb, takeuchi, terex, new holland, mustang, everything attachments, skid pro, quick attach, skid steer 3-point adapter, skid steer tiller, skid steer tiller attachment

Хобби

Опубликовано:

9 ноя 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 64

@SeidelRanch 3 года назад

As you can see, this is my honest opinion about this product. I don't candy coat it. Either it works or it doesn't.

@onpointmachiningllcschmidt5441 3 года назад

I bought one, you're right about the sway. I bent a couple of 3/8 thick 2 inch wide flat steel that bolts to the outside of the frame. It was a cheap fix and the unit works great, very rigid now. I also drilled and threaded the hook on the arms to tighten down the pins in place. You're correct about the clutch idea, however usually the implement has the breakaway. I too have a 317 john deere, which is nice because we can control flow with our right hand. I like the unit, for what it is, it's not a bad deal. Just don't expect too much as is, if you're not mechanically inclined to make necessary modifications. I wouldn't recommend buying one.

@SeidelRanch 3 года назад

@@onpointmachiningllcschmidt5441 Good points. I sent it back, but if I had to have kept it I would have had to make a lot of modifications to make it work the way I needed.

@RG-gn1ln 3 года назад

Glad I watched your video I was looking to buy one them .

@SeidelRanch 3 года назад

I wanted it to work, but it was just bad design.

@oiu7890 9 месяцев назад

Get the sleeves that have a ID to fit the lower pins on the mower and a OD that fits the arms on the 3pt hooks. You can get them from any tractor supply store. I rebuilt my mower by making a mount on the back that attaches to the 3pt. I rotated the mower gear box 180 degrees. I added a over running clutch on the pto. But you could and a one way valve between the hyd lines to allow it to bypass when you shut the hyd flow off. The top link does not need to be adjusted just use your tilt on the skid steer.

@SeidelRanch 9 месяцев назад

I tried using the quick hitch bushing and they were too big. I even tried bigger cat pins. The design was just not great.

@skipwaelty3974 2 года назад

Thanks, saved me a bunch of $.

@SeidelRanch 2 года назад

I see they have a Version 2 now and did include some of the items I told them about (relief valve missing, weak lower pin connections, top link setup wrong), but it's still got a long way to go to be usable. The side to side swing when moving pops the pins out and I see they still have not addressed that. The angle of the lower pins are also wrong. A 3 point attachment is usually pulled on a tractor. On a skid steer they are pushed unless you want to run in reverse which is the worst direction for a skid steer for visibility. There is too much wiggle in those pin connectors to keep the attachment stable. Glad it helped. I wouldn't buy the version 2 either.

@jy7022 3 года назад

You can get a pto overrun clutch that just replaces that gold adapter you have on there

@SeidelRanch 3 года назад

Yeah, I thought about doing that but since it had so many other issues I just returned it. Thanks for the feedback.

@karlanderson6149 Год назад

Thanks for sharing, gonna save me some heartache

@SeidelRanch Год назад

Glad I could help. I was just that. A headache.

@daleotto5748 11 месяцев назад

Item is ment for 3 point Hitch to be pulling on it never to push hard on them it ment like to be used like on a tractor

@SeidelRanch 11 месяцев назад

I understand that point, and it's valid. But that is not what it was marketed as. Driving skid steers in reverse all day is not a good use of that machine. Plus you can run a 3pt on a tractor in reverse too and they hold up fine. This is no where near that strong. No where near. Not even a little close. Unusable.

@StuffBobbyDoes 2 месяца назад

Wish I had seen your video before I bought the Exterra brand (same thing, I think). I have yet to try it though.

@SeidelRanch 2 месяца назад

Good luck. I hope it works better than mine did.

@kn1ghtwolf213 2 года назад

Did you ever order the basic 3point without pto? I am considering that same thing but I have my doubts it can hold a 1000ish pound grader without failing, I've seen just about every review on them has stated they need modifications on the quick attach. Also looking at eterras version that seems a lot more heavy but its 3x the cost and they haven't been in stock for months.

@SeidelRanch 2 года назад

I bought one of these from them: amzn.to/3cpgs8y I have to say, it leaves a lot to be desired but it does work. I would in no way call it heavy duty. I have used it a few times with my 3pt landscape rake and it does the job and has not broken yet. The real issue is a skid steer pushes and a tractor pulls. These adapters can't handle the beating that a skid steer will give it. I am now just getting rid of anything I have that is 3 point and getting a heavy duty skid steer version.

@finale5170 2 года назад

Great video Mate. Would be nice it there was a rear mounted version minimum

@SeidelRanch 2 года назад

Yeah, the idea was good but the implementation was not. Overall a poor design for any rough usage.

@olgahackelton8222 2 года назад

@@SeidelRanch I have done a heap of research since watching your review and i think the problem is that your pushing the attachments instead of pulling. I know, going backwards sounds dumb but the hitch system on 3 point attachments is built for pulling and floating. Im sure beefing things up a bit would help but i really believe its the best option for the conversion. A rotary hoe for instance would be quite handy in reverse and a PTO chipper doesn't move at all, both thousands cheaper!! As well, non PTO implements like a Box Grader, Disk Harrow would all work in reverse and again cheaper. As for a slasher, probably the wrong implement for this adapter.

@SeidelRanch 2 года назад

@@olgahackelton8222 You will definitely have different results based on the implement you use with it, but for my purposes it was no good. Going backwards in a skid steer is pretty much useless since you can't see anything. If you were using a chipper or something like that which does not need to move you may be ok, but anything that would go forward would be a problem.

@Mr.frag-out 3 года назад

Ok good thanks

@SeidelRanch 3 года назад

Welcome

@jimmyfreeze3782 10 месяцев назад

I busted the wheel off my brush mower (shredder lol) designed for a 20 hp lawn mower/tractor so I mounted it on my skid steer and ran it in backwards. More stuff broke. It’s a bad design.

@SeidelRanch 10 месяцев назад

Yeah, these just are not designed to handle the abuse needed to run them.

@kearonhandrahan6589 Год назад

You need to add a Hydraulic cushion valve between your quick couplers and your pto motor

@SeidelRanch Год назад

Yeah, I told them they needed to add something like that. I sent it back because it had too many design flaws.

@orchardtvchannel 3 года назад

Yeah I see the flaws . I mean it looks like a good design but needs some mods. I've seen some better designs . Are you planning on buying another pto adapter ?

@SeidelRanch 3 года назад

No, I think I am going to make my own from a 3pt adapter. I can get the hoses and hydraulic PTO motor online rather cheap and then just weld up an adapter.

@orchardtvchannel 3 года назад

@@SeidelRanch Yeah I'v thought about that too I know harbor freight sells a quick 3 point hitch setup and it would be easy to make an adapter .

@joshuagrant1428 Год назад

I wonder if a case drain would help this design.

@Mr.frag-out 3 года назад

Maybe use it on a chipper

@SeidelRanch 3 года назад

You could, but you would need to add a pto overrun clutch or a hydraulic check valve into the lines or the drum on the chipper would tear up your machine's hydraulic pump.

@robertleib7201 3 года назад

Well this is classic Titan. Copy my 20 year old proven design and cheapen it just enough to undercut my price. This video is great at showing the things that they missed with their Chinese copy. They really don’t understand this attachment and it shows.

@SeidelRanch 3 года назад

Yeah, this was a no go from the start. It had too many missing features that were needed and not enough strength to even hold the shredder on.

@robertleib7201 3 года назад

@@SeidelRanch I love that you returned it. I bought a few of their copies to see how they managed to make everything so cheap and I completely understand how they do it now. Many people buy their stuff, break it and then come back to me for the original so in the end, they spend more.

@SeidelRanch 3 года назад

@@robertleib7201 Are yours 100% made in the US by your company, or do you design them here in the US and have them built in China? I saw yours too, but figured it was basically another version of the same Chinese item. I was going to build my own, but if yours really is made here 100%, I might just give yours a go.

@Motocrossislife11 3 года назад

Nice info @rob, I figured as much. @@SeidelRanch I bought it already, Idk about where all the parts come from but it it's made better than most American attachments I buy so I assume it's here. grade annodized bolts, and the motor actual swivels. Quality motor, nice finish and hardware is what I have to say.

@markmilton3949 2 года назад

Why do you call it a sheddar it's a brushog

@SeidelRanch 2 года назад

I call them many things. Bush Hog is the brand. It's a Bush Hog Squealer SQ720. Shredder, rotary cutter, rotary mower, brush cutter, brushog, ... are all nicknames for these tools.

@daleotto5748 11 месяцев назад

Just turn the brackets around

@SeidelRanch 11 месяцев назад

That might have helped some, but then it would probably have just fallen off too.

@kenrykert2503 3 года назад

I agree with you, very poor design and construction, especially the lower latches!

@SeidelRanch 3 года назад

Yeah, I am going to try to make my own and use a much stronger setup. If I do, I will make a video of it.

@dakotak8437 3 года назад

Looks like the pit it on backwards bc your pushing so dumb. Need to get the quick hitch cut off and put them up and down all about money not quality. Looks like someone put parts and welded wrong way

@SeidelRanch 3 года назад

Yeah, after getting it put on I saw it was not thought out very well. I pointed out the flaws to the seller and they agreed it needed to be redesigned. It is just another Chinese product imported into the US.

@dakotak8437 3 года назад

@@SeidelRanch lol you know they prob ain't changing anything if it took till you did this video to change it that's why ya don't send things over seas

@SeidelRanch 3 года назад

@@dakotak8437 Very true.

@dakotak8437 3 года назад

@@SeidelRanch it's stupid that we make stuff put pay them to put it together to buy it back all assembled don't see how that's cheeper by much

@pascualanguiano510 3 года назад

17 min of of just talking should of at least shown it mowing for one minute 🤦🏻‍♂️

@SeidelRanch 3 года назад

I was planning on doing that but it would not stay on.

@mikem3161 Год назад

I just mounted a plate and orbit motor on my 6 foot king kutter 3point mower. But you need to turn you're mower around its not made to mow that way!!

@SeidelRanch Год назад

Yeah, I was planning on modifying the mower to cut that direction but it was a failure from the start.

@swampwhiteoak1 3 года назад

Too much talk, too little action. Show it in action. Poor design, poor manufacture, improper application. Return it or put it in the junk pile. Quick hitches are junk.

@SeidelRanch 3 года назад

My plan was to show it in action, but I never got that far. I had to return it but at least that part was easy. Thanks for watching.

@mikem3161 Год назад

You need a one way check valve in you hoses.

@SeidelRanch Год назад

I think I am going to try what you did and just get me a hydraulic motor for it. I will design that in when I do.