TOP 10 RESIN MISTAKES (and how to fix them!) in 2022 

Hey guys! Thank you for watching my video! Please use my code 'lambsstudio' for a Just Resin DISCOUNT! justresin.store/

This was so great! Thank you!

Great video! I tried resin the first time yesterday and I definitely made some rookie mistakes! I appreciate you giving straight info! 💕

nice video, thanks. suggestion: Lower your background music, it makes it hard to hear your words.

This was really useful! Thank you!

These are very good learning tips.Being a Newbie these tips are going to be very helpful. Resin can expensive if u don't know w hat ur doing.Thanks a Much.

I think You should make more videos!! Don’t give up. Less other things came up. Your videos are very clean and well done

Thank you for the tips. You explained them really clearly and I hope more people watch the video to help with their art work. I have been doing resin now for about 4 months and I found this really helpful.

thanks so much sweetie pie!!

I love # 9

Thank youu!!

Just a tip: RU-vid is global, you may want to mention degrees in Fahrenheit for folks in US. I know they can do the conversion, and you may not think it’s a big deal, but your content will come across exclusive if you don’t. And I know you feel that your content is for everyone so just a little tip that’s all. 🙂 side note: you do great work 👍🏻😊

I love this!!! Great explanation! If you make more I would love some insight into pouring nontinted resin. I was building a cute little “River table” and the resin went from clear to a milky white color. I wondered if it was the wrong temperature curing or what else would make it do that

Thanks for this video! I needed it. I also need to know what's best to make sure your resin project does not stick to the mold. I used a mold (open hands mold) once. The next time resin suck to parts inside the mold. Any help with this is helpful. I looked up resin release sprays. To many to choose from and reviews were all over the place. Thanks again for this video which really helped me on time, inks, room temps! 👍

I have a tray and it has a small indentation by the handle. After the first layer and it cured overnight I used UV resin to attach the handles. Can I use UV resin to fix this small spot or do I have to resin over the whole piece? If I have to resin it again, do I need to sand before doing another layer of resin?

What face mask protection do you use?

I hope you see this. I did my first resin pour. I had to tape the edges and pull tape after the resin set up a little so it wouldn’t run off. When I pulled the tape it took off the base coat of paint primer. Everything else is just about perfect except the spot where the wood is showing under the epoxy. It’s on the edge of a wood table top.

Hi! I love this video, it’s a great help. I’ve done a layered letter, and my top coating isn’t setting hard, it’s quite rubbery. Would an additional layer on top solve this? Thanks

How do I fix it , software and sticky. 5 minute epoxy

Thanks for the info, I use a mircowave cover to my work, so no bugs hair etc won't get into it.

Hi! Does the mica pigment powder amount affect the resin outcome? I added a bit of mica too a small amount of resin (around 20ml) and it wouldn’t set. Xxx

Hi iam new to resin is there a way to use resin after being mixed together if gets hard in the cup

How to remove foggy layer on the top

Tq for the great info . I measured my resin but still having trouble in coating ..the resin move inside n the edges resin fades.. wat I can do? Covered edges using tape but worried if it's sticks together

Hi!!!! If it was too cold for the first 48hrs of curing time- if I put it in a warmer spot should it eventually harden??

My resin is coming out bendy , what am I doing wrong. Great video . Love with .

Hi Real Quick Question: I really need your help! So I am making a resin bowl and it appears hard on one side and one side it still isn’t cured. Its been 48 hours now and I am worried if it’s going to cure before I remove from mold or not. Please provide some insight on how to fix this

Hi, i made a flower bouquet in a square mold around 8’’x8’’x2.5’’, and its sides came out benty inwards, do you know why? Thanks!

Do you have a situation when you pouring a top coat the surface is not smooth? Irregular web or other defects are forming on my coasters. I do not know what to do. I use high quality resin. I have problem only with top coat layer. Please help me :)

New to your channel thanks for the help. Do you know how to remold your resin after it set.

Hi, thanks for the tips. I’ve started working with resin and I get beautiful results. But… for some reason it won’t stick to the edges of my board/canvas, it keeps dripping off and leaving a very thin (almost transparent) layer … I’m trying to reapply every 10 min but it’s really stubborn… any idea what am I doing wrong?

Hi i have got a little scratch on the middle of my coaster can you help me to fix it please

Hey! My resin is a unleveled in some parts and has a few fingerprints so pouring a clear coat after 24 hours will fix it?

Thanks for the video! I have a question 🙋‍♀️ my resin work is bendy and this is my third try with a scale and it’s 1:1 but still the same problem, don’t know what could be the reason 🤦‍♀️?

Hi pls help me The pigment paint I’m using sort of gets sticky and breaks up and scatters as I put it in the resin while mixing, I mix it slowly and for a long duration but it just keeps scattering….pls help me solve this pls 🙏🙏🙏🙏🙏🙏🙏🙏🙏.

Thank you for the tips. When two colors are used they just fuse and dont look distinct. Why is that? Also, can fabric paint be used to color resin? Thanks🙏

I got paper stuck to my resin keychain when drying. It looks like when you don’t fully open a package, that thin layer of paper. How can I fix it ?

Is there a way to fix resin art that’s already set but is still bendable, without throwing away the art?

So I've been using art resin as a thin clear coat for some props, and I've been brushing it on smooth, but it won't stay smooth. It keeps forming a squiggly ugly pattern regardless of how many times I try going back over it to smoothen it out. 😡 It's really frustrating and looks awful. How do I fix this and avoid it in the future?

Hey I stared using resin on wood,but after 7 hours the edges of the painting is without resin.What should I do?

Can you help out.? My project still bends what I’m I don’t wrong??

My brother makes tables with resin and he is having this problem: little pits appear in all the surface and he doesn't know why. Sometimes it happens, sometimes not. Why do you think it is? And how could he fix it without having to do it all over again? Thank you!

I am having problems when doing resin serving boards. The boards are level, but the resin keeps pulling away from the edges of the board. How can I stop this? Thanks...

HELLO, I HAVE A QUESTION. MY COASTER HAVE A CRACK ON THE BACK SIDE. HOW CAN I FIX IT? WHY DID IT HAPPEN ? I MOVED MY COASTER WITH THE MOULD TO ANOTHER PLACE. THIS IS THE REASON?

A greasy oily layer is forming over my resume artwork while drying and stays even after that. Ruins the surface. What can be the reason? any solution??

Do you use your waste resin at all?

What can you use to fix pinholes ?

My tape is stick to mdf clock board... any idea how to remove that

Heyy i have a doubt. I am a beginner and i am doing on canvas so when i pour resin, the colours are mixing each other i am not getting correct shape. All colours are moving and making some other shapes . I don't want that i want fix this problem but i couldn't do. I tried many ways nothing is working please help me . Its just moving and all shapes will go and it will look like something else i want to get a shape what i want. Please reply and help me.

What to do if the resin won’t set.. mine isn’t setting from some parts.. I really want to fix it please tell me how to do it.. thsese flowers are precious to me🥺

What do I do if the resin pulls away from the edges while curing?

My coffee cups sticks to my coaster. How do I address this. It cured for 3 weeks before I used it.

I just did my first coaster set and there’s micro bubbles all throughout my coaster ?! What about micro bubbles

Why do u get a gas look in the middle of coaster, is it the resin?

I have 2 different brands of resin. Both say to measure by volume. You said weight. ?

How do you remove spoilt resin off of a canvas board

I'm using protite resin and having a hell of a time with it, i blow the air bubbles out with a blow torch and the bastard catches fire , if i use a heat gun it leaves dimples in the whole piece😡 so, my question is, am I using the wrong type of resin or should I just go back to mowing the lawn😞

let's say you have measured your resin currently, but your environment is too cold whilst you leave it to set, would it not set at all or would it just take longer to set then usual- what has been your experience with this? (dam Melbourne climate ).

You didn't say how to correct mistake #8. Can it be corrected?

Please could you help After 10- 12 minutes I pour my resin it gets this cloudy layer on top. Where am i going wrong???😪

Resin is soft

I have got resin that won't set. The hardner was as thin as water. And I had weighed them in equal parts. But even after 2 days it won't set! Edit: It's been weeks but it won't set.

thanks a mill. I still have a problem that when im mx two colours they will blend within a few minutes. it all looks good at the start and then after 20 minutes its just one big coloured project.

I NEED SOLUTIONS HELP ME HOW DO I FIX ITTT ITS A SCHOOL PROJECT FOR TMRWW WE’RE SELLING THIS CRAP

So, I have only just become aware that epoxy resin, of any sort, is a highly toxic material to work with. You have to glove up (which I see you doing here, but your arms are exposed) be in a very well ventilated area, and most importantly you Need to wear a high quality respirator. Not just a dust mask, but a respirator that will filter the gasses of the curing epoxy from your breathing it in. Hardly anyone shows themselves doing this, but we have been risking our lives making crafts without knowing it. Please look up the MSDS of your resin. They have to have one. Please protect yourself, and promote the serious need for safety.

Helpful but very difficult to concentrate on what you are saying with background music. Would suggest you don't use any music at all.

the music was a great distraction to the audio!!

I just tried my first resin art it was a fail. Don’t look as easy as shown on RU-vid videos

Don't you wear protective mask? Epoxy is very toxic.

#12: working without a respirator.

Mistake #12: accidentally mixing hardener with hardener and forgetting to use resin at all. Then discovering 4 days later that your “resin” pour has no actual resin in it and that’s why it’s still completely wet on top of your canvas. How to fix? 💀🤦🏼‍♂️🤦🏼‍♂️