TOP 6 SMART DIY INVENTIONS 

Diy bijibapakaumeledak apa gunanya

💝💝💝👍

No, its a waste of time. Mild steel is so soft, the attempts at making a gear, in that excuse for a ratchet wont last 10seconds before being round off if you put any sort of pressure on it, let alone the square drive point for the socket

Word! What is this channel anyway? 5-Minute Crafts: The Useful Edition?

@@kf8575 Killjoy...

But on the other hand he experiments a lot of satisfaction making his own and personalised tools. Think about... 🤔🤔🤔🤔

First off things like the hole punch would be much faster to just build one then to go to the store. I build tools every day to avoid the time it would take to go to the store. second off some of these tools are not available in any store.

@@ottotater2787 Most if not all of those tools are available at Lowes. Maybe not the hole saw guide, I've never seen one before. But then again, I've never had an issue holding my drill straight using a forstner bit.

Agree 1000%. It'll be easier, quicker, cheaper and better quality in a shop. And no time wasted.

Exactly!! Check out my long post to see if you agree...........

No se pueden ver los videos

Of course he has all the tools, he made them!!

I want the tools,

Indeed.

I want the tools !!!

@Paul Silcock A guy named Bob made the first tool. All others came from that.

Very useful tip.

Not really needed

Craig Jones ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-B_lL1WXYBAo.html

@@Quentyn73 absolutely is needed you amateur

Why

Homie is a HF!

Y si dejan los celulares ....¿como van a ver este video? 🙃

@@rockrollmagratti7899 tenés razón en eso pero me refería a los juegos que los hacen adictos y los distraen muchos y después no saben cambiar una rueda de bicicleta

@@francoscarpecci217 si eso es muy cierto. No digo todos por que hay muchos jovenes que saben y mucho pero en su mayoria es como tu dices no saben ni cambiar un foco.

Deja las motitos salame

Doesn't do any good if the circle youre removing is the part you want though

just put a hole in a piece of plywood, and clamp that where you want to drill hole

Hello beautiful hearted person. I also built a a shelter with natural meterials. I think you like it. Please come my channel and watch it ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-PAIfoCYVZck.html ... I need more and subscriber plese help me.

@@c4kir61 Good chance for you 👍

Still gets the creator to like

Kidding ?

ah, that's where you're wrong . . . that device was made from rusty scrap in the last video . . . it has all the precision of a tool made from well-chewed bubblegum!

@@willi-fg2dh lmao

"Weld" lol you mean his 352 tacks

Why not clear the corrosion off before welding? ...welds full of inclusions and interfacial joints full off crud and corrosion. Quite silly to say the least. I suppose this is the difference between and engineer and a mechanic. An engineeer knows more than it is necessary to know! All rather sad.

Yep report the video if you would like it is misleading and should not be on RU-vid. RU-vidrs like him should have to repay every dollar of every minute of everyone's life that he wasted time of see he cannot replace the time that he wasted.

I clicked on this video to find out what the heck a bolt threaded through the side of a nut with a spring on it was good for.

If you don't like a video, then do not "thumbs down" because this is just as good for the channel as a thumbs up. Instead, just move on t the next video.

@@coriscotupi apparently you don't know what the thumbs down stands for thumbs down stands for I do not like it so apparently I'm going to put I do not like it then why give you a better review than what you deserve don't like it I don't like it I like it I like it in this situation I don't like it is my opinions that's why they give the option of giving thumbs up or down. Go back lookup what thumbs up and thumbs down on RU-vid means until then you don't know anything you're talking about. the thumbs-up thumbs-down rating system is there for my opinion and my opinion was a video suck so I gave it a thumbs down if you do not like it then create a better video that is not clickbait.

@@glydrfreak same here and they didnt show it hints why thumbs down for the click bait. As click baiting is against RU-vid policy and as a result your account can be ban as they should be.

Ryder RatedR ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-B_lL1WXYBAo.html

Please teach us English , Sir!

I think this guy also stayed home from school on the day the teacher taught the definition of smart too. He is just recreating bulkier, heavier, and already rusted out versions of low tech tools.

. ...

But they are all inventions, that you can do yourself, but I wouldn't say are new, or smart.

Hello beautiful hearted person. I also built a a shelter with natural meterials. I think you like it. Please come my channel and watch it ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-PAIfoCYVZck.html ... I need more and more subscriber plese help me.

Moises Garrido ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-B_lL1WXYBAo.html

Ah

So am I

Whaaaaattt??

yes

If you can center drill a hole before using that bit I will give you $30,000 today. I'm not kidding I will pay you that much because it'll easily be worth that much to me if you can resolve a problem like that today.

@@ottotater2787 just give me 150$ i will make it for you, you even didn't have 10k on your wallet, right?

@@ottotater2787 He's not center drilling a hole before using that bit. He's using a different bit that has another drill sticking out of the center of the hole saw, which is the first one to bite into the material and then guides the saw part. Here's a picture: www.123rf.com/photo_52853635_wood-hole-saw.html The bit depicted in the video is for drill-presses, which don't need an additional guide. The bit I described is for hand tools.

exactly my thoughts too

click bait to get you to watch things being invented that have already been invented... next in the series.... how to invent a wheel

Lol its funny that he grinded after he wielded

Herman F. Ebeling, Jr. wtf

Useless jiberish from a useless jiber

If you broke remote live in a non westernized part of the globe an don't city slickers or cities an their virus carrying ways

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-4Jg5I2DhCH4.html How do you like the idea? Subscribe will be a lot of interesting

@@Mr.Craftsman Need suscribers, right? Spam!

@@marcelojaviertwt fuck you

@@SquishedRoadkill You just build one in like.... humm... 5 minutes!? You just need to have all the parts and tools...

Facepalm emoji, come off it

Че Матвеева неё смотришь?

Я сильно охуел от способа которым он этот храповик сделал (само зубчатое колесо)

А ты закисшие болты ну прям трещоткой срываеш? Ну-ну

@@alexandrpustovoy8176 Ну, да. А что таки не так? Или вы предлагаете набор экстракторов?

Ну так и сочленение с головкой 1/4 дюйма! Максимальная головка 13 мм , а резьба м8. Сдюжит!

Не в ту сторону они работают, во всем виноваты тяжёлые наркотики.

Its Hidden valley though...

Fr bro

Damn, I was just thinking that myself. That's not inventing...that's just a waste of time and money.

Sometimes you already have the materials and tools lying around, but no money for new tools, genius! So you gotta do it with what you have.

If you have the scrap metal and tools laying about and it is a day's trip to get to the store it can be cheaper to make it. Also it is a great project for when you are board.

Harbor Freight is a joke!!! Save your penny’s and buy quality tools that aren’t embarrassing.

0ї

Ok wait, let me grab my wrench. Wait a minute.....

Насмотрелся доктора дью.

Квадратный Трехчлен подшиБник

@@user-gg2vw4lv3x правильно пишется подшипник от слова ШИП

Квадратный Трехчлен мне похуй, диайвайщики не могут пиздеть

@@user-gg2vw4lv3x ну что ж будем верить диайвайщикам

Yep report the video if you would like it is misleading and should not be on RU-vid. RU-vidrs like him should have to repay every dollar of every minute of everyone's life that he wasted time of see he cannot replace the time that he wasted.