Top Drawer! [video 519]

Подписаться 264 тыс.

Просмотров 42 тыс.

50% 1

In this one I make a quick & easy inset #drawer in #Birch ply and #Maple veneered ply. Enjoy!
Interested in the duelling duo-dwellers, Birch ply alternatives or how the rest of the drawers & runners work out? Subscribe to make sure you don’t miss a thing - bit.ly/10MWsubs...
I used the Keith Brown @ragnbonebrown Original Oil Wax finish, also available in clear and food safe versions here - www.etsy.com/u...
AUK router was supplied for lomng-term review by Woodworkers Workshop. I have not been paid to make this video or say nice things about the product, as a WWW affiliate I may earn from qualifying sales; be sure to use the offer code ’10MINUTEWORKSHOP’ with the links below for a 5% discount (valid until December 31st 2022) on these products, and thanks so much to Woodworkers Workshop for extending that offer.
woodworkerswor...
woodworkerswor...
woodworkerswor...
+++++++++
Become a 10minuteworkshop Plus member and support the channel further - more details at 10minuteworkshop.com, or sign up directly at 10minuteworkshop.plus
Please note that I have moved away from legacy member platforms to concentrate on my own memberships at 10MinuteWorkshop Plus; member benefits at Patreon and YTM will be significantly reduced from October 2022.
Support the channel directly - bit.ly/donate_t...
+++++++++
Other videos of interest:-
My cheap nailer and compressor - • My Cheap Nailer and Co...
Workshop cabinets and shelves - • Workshop shelves & cab...
Basic plywood boxes - • Basic Plywood Boxes [v...
Torsion box Router Bench - • Torsion Box Router Ben...
Birch ply drawer router cabinet - • Birch Ply Drawer, Rout...
New to track saws? Tracksaw workshop & all tracksaw-related videos in a playlist here - bit.ly/Tracksaw...
+++++++++
Handy consumables & gear:-
I am an associate of Amazon, Benchdogs, Rennie Tools and an eBay Partner Network member; I may earn a commission from qualifying purchases made through these links.
Sorry, but I won’t link to the 23g nailer as the whole buying experience was woeful and the bunch of monkeys who sold it don’t deserve anybody’s business.
Hyundai 8-litre quiet compressor - amzn.to/398TyB7 (US: nope, sorry)
Silverline 18g nailer - amzn.to/3sfcZ2S (US: [similar] amzn.to/3rjJR9u)
18g nail mixed pack - amzn.to/3lGRIfW (US: [similar] amzn.to/3ccvrmW)
Triton Duo Doweller (full review coming soon) - amzn.to/3XzNQyF (US: nope, sorry 🤷‍♂️)
Adjustable cabinet feet - amzn.to/3XzQfJH (US: [similar] amzn.to/3Xranh6)
Benchdogs. Use offer code 10minuteworkshop at checkout for 5% discount across the board at benchdogs.co.uk
Benchdogs precision rulers (Gifted) - benchdogs.co.u...
Bessey DuoKlamp - amzn.to/3eDz1Ig (US: amzn.to/3w1s1dM)
Festool lever clamp - amzn.to/2pOohLD (US: amzn.to/2pnFZIM)
Festool Midi extractor - amzn.to/2tCIN3Q (US: amzn.to/2rKNIOx)
Stainless steel graphics knife, Olfa SAC-1 - amzn.to/3DnWzvJ
Polyvine Polyten PVA - amzn.to/2EY9Dgf (US(crazy price, just for reference) amzn.to/2Tm7RsC)
Tongue depressors (waxing spatulas) - amzn.to/2zpHlp8 (US: similar) amzn.to/2S1QLP7)
Hultafors Talmeter tape measure - amzn.to/2pHwnbH (US: amzn.to/2oqLQc9)
Moldex 6810 in-ear defenders - amzn.to/2P2c5nP (US:amzn.to/2LgIsye)
Bahco 6” combi square - amzn.to/2oumhX4 (US: amzn.to/2ouSg9k)
+++++++++

Опубликовано:

26 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 87

@elguapo1507 Год назад

What you do in a 12 minute video takes me a month of Sundays and I go through the multiple trapezium stages to get there! 😂😂 Looks really good as always! 👍😁

@10MinuteWorkshop Год назад

Thank you! 🙌👍

@lewisworkshop Год назад

Love the contrast of using a $1000 tool to patch up a couple dollars of plywood for the drawer back. Nothing wasted! Love these videos!

@10MinuteWorkshop Год назад

Ha! It might have been a couple of dollars when I bought it, it isn’t now! 👍😂

@simoping 9 месяцев назад

What better food for the mind and soul than Peter and his projects. Thank you. My first project starts next week… a basic printer cabinet… inspired

@MrSammyse Год назад

"Just to keep it real" Peter always keepin it real. Great video as always

@10MinuteWorkshop Год назад

Thanks Sammy! 🙌

@Thesidingsworkshop Год назад

🤣🤣 because I can ...... love it 🤣🤣👍 nice build rebated drawer front looked great 👍

@10MinuteWorkshop Год назад

Thanks Dan! 😆👍

@Mr.supercapybara4207 Год назад

From one Peter to another Peter Big fan Did my apprenticeship in Hackney In 96 life long carpenter and proud of it Move to Los Angeles 31 years ago an still in love with my trade All the best Peter

@10MinuteWorkshop Год назад

Thanks! Best wishes from London!

@daviddura1172 Год назад

love the transformation when you hit it with the wax...

@10MinuteWorkshop Год назад

Thank you! 🙌

@redhornet07 Год назад

Your drawer technique is fantastic, looking forward to seeing more!

@10MinuteWorkshop Год назад

Cheers Paul! Oh, there’s more… 😂👍

@allanwilliams679 Год назад

Another great video Peter. Loving the upgrades to your work space. Thank you for sharing the journey… 👍🏻

@10MinuteWorkshop Год назад

Thanks Allan! 👍

@Andy-te6jj Год назад

nicely done Peter

@10MinuteWorkshop Год назад

Thanks! 👍

@daviddura1172 Год назад

the trac saw working around what usually is the realm of table saw work (dado blade use here in the US) .....so perfectly done....outstanding......

@10MinuteWorkshop Год назад

Thank you! Been using one forever, they’re a great tool for sheet goods. 👍

@andyc972 Год назад

As always very slick and a master class in tidy efficient working Peter ! I particularly liked the perfect finish on the drawer front from the router table, and as a result how neatly it slotted into place ! I keep trying to break my long established habit for measuring everything and instead using offcuts, packers and templates as you do, as it is (obviously) far more likely to result in a perfect fit - good tip on using an offset from the actual board - been caught out by this before !

@10MinuteWorkshop Год назад

Thanks Andy! Yes, I’m a big fan of packers, shims and spacers! 👍😆

@Mindsaw Год назад

Your technique is lit!

@tbas7161 Год назад

very slick drawer front - never saw that technique

@terrytopliss9506 Год назад

Nicely done Peter.👍👍

@10MinuteWorkshop Год назад

Thanks Terry! 👍

@calvinnash5527 Год назад

Excellent Peter, workshop is looking good 👍

@10MinuteWorkshop Год назад

Thanks Calvin! 👍

@dougsaunders8109 Год назад

Top draw video as usual Peter 👍🏻

@10MinuteWorkshop Год назад

Thank you! 😆👍

@MCsCreations Год назад

Beautiful work, Peter! Really amazing looking drawer! 😃 Stay safe there with your family! 🖖😊

@10MinuteWorkshop Год назад

Thank you very much! You too! 🙌

@thomasnourse7506 Год назад

Nice addition to the shop! Hello from the US!

@10MinuteWorkshop Год назад

Thank you! Best wishes from London!

@paulmaryon9088 Год назад

Great stuff thanks Peter, take care out there.

@54mgtf22 Год назад

Love your work 👍

@PositronicDiscombobulator Год назад

I'm thinking of ditching my large table saw for a plunge/track saw, my workshop is too small for it and sometimes lives outside. It's a hard decision though as I'm afraid I would be lost without it. These videos are slowly convincing me.

@sewob147 Год назад

New camera? Incredible clarity and beyond pin sharp close-ups in the last few videos.

@10MinuteWorkshop Год назад

Thank you! No, no new camera, and most close-ups are shot on my phone. 👍

@nicpye248 Год назад

Traditionally the rear of the drawer would be lower than the sides. This would stop a vacuum forming, making it difficult to open. As you have cut-out draw handles, air is drawn through the handles to the rear of the unit stopping a vacuum from forming.

@10MinuteWorkshop Год назад

Also, no back on the carcass - makes a big difference! 👍

@qwer12324567 8 месяцев назад

I'd noticed sometimes drawers get stuck on apparently nothing, now I know why! Many thanks nicpye248 and, of course, Peter.

@qwer12324567 8 месяцев назад

I'd noticed sometimes drawers get stuck on apparently nothing, now I know why! Many thanks nicpye248 and, of course, Peter.

@garvielloken3929 Год назад

Nooice!

@frederickmichaud6783 Год назад

Very nice! Can’t wait to see those Baltic birch alternatives!

@10MinuteWorkshop Год назад

Thanks - they're coming! 👍

@CompleteMisc Год назад

Just curious, you use the term “rebate”. Is that the common term in Britain? We would call it a rabbet joint in the US.

@10MinuteWorkshop Год назад

Yes, it’s the non-US term for that joint. 👍

@michaelrobinson9643 Год назад

How many MFT benches have you got? Each video I watch I think you have a different one! :P I like the idea of a replaceable cross cut area with sacrificial piece.

@10MinuteWorkshop Год назад

Two - one workshop MFT (the black top) and one for the ‘basic build’ videos that I made from bits I pulled out of a skip. 👍

@Mr_Gadge Год назад

2k views, and 280 likes, people are a disgrace, it's a simple click to like. Thanks again for your amazing hard work you've taught me so much over the years. I'm still useless as I don't have much time lol, but a dewalt DWS520KT kit arrived today with 3m of rail and bag, on a deal I just had to pay attention to. Hope I made the right choice! I'm now wading through (enjoyably) all your tracksaw series! Thanks again. I've already 3d printed the end cap protectors for the rails lol

@10MinuteWorkshop Год назад

Nice! 🙌 👍

@JameysVideos Год назад

Hi Peter. Can I ask which particular double-sided tape you use? I think you favour 3M but there are multiple ones on Amazon. I have some generic unbranded double-sided tape but the residue it leaves is almost impossible to get off the face of MDF.

@10MinuteWorkshop Год назад

I like 3M 9088 strong double-sided tape 👍 - amzn.to/3u2Ekqw

@JameysVideos Год назад

@@10MinuteWorkshop Amazing, thank you

@Chris-vp9ht Год назад

Hi do you no off anyway that sells the aluminum track you used on the side off your bench for your rail clamps

@10MinuteWorkshop Год назад

It’s standard t-track; there’s a link to the Rutlands one I used in the description, but they’ve changed to only selling 1-metre lengths now, so I’d recommend woodworkers workshop as they do 1200 lengths. 👍

@Chris-vp9ht Год назад

Oh right thanks for getting back to me much appreciated

@HinnerkMusic Год назад

I love how efficient you are wit a tracksaw! Do you have any tips how to reliably cut 45 degree bevels for beveled boxes? Is that something you can archieve or is it always trial and error until you find the right angle on your saw?

@10MinuteWorkshop Год назад

Thanks! Bevel cuts are always hard because there are so many ways that the angle can be affected - just your grip on the saw is enough o alter the blade slightly, so I always recommend making test cuts to get it dialled in just right, and if you have a lot to do, leave the saw set that way. 👍

@HinnerkMusic Год назад

@@10MinuteWorkshop Thanks for the reply! I saw you doing that in another video, and the result seemed to be perfect. Guess the most accurate way would be magnetic Inclinometer directly on the blade for setup.

@Addicted2Fun Год назад

Hi Peter I’m new to the channel, subscribed of course! You do excellent work, and are very entertaining. I’d like to ask maybe a dumb question ? But I notice in a few videos where you are using flush trim router bit I believe? Looks like a compression style maybe I’m wrong but I been playing with these styles lately looking always for a better one, what’s the one you use in this video at 53 seconds in? Any help would be appreciated !

@10MinuteWorkshop Год назад

Hi, thanks and welcome! Sorry for the slow reply - had to get into the workshop to check; t's a Trend bit with a double bearing, top & bottom, so good for use in a table as well as hand-held. Bit reference is C199 x 1/2 where the 1/2 is the shank size, and it's a 19mm bit x 50mm cutting height. HTH Peter

@Addicted2Fun Год назад

Taking time out of your day means a lot thank you!

@davidpascual962 Год назад

Hi Peter, a big fan here! Just a question, who is the maple face and reinforced poplar plywood producer? Is poplar plywood cheaper than birch? Thank you!!

@10MinuteWorkshop Год назад

Hi David and thanks! There’s a ‘Birch Ply Alternatives’ video out next week, just fyi, you might want to wait for that be for placing an order. The maple-faced ply is from Garnica, and bit the Poplar and the maple were a little less costly than Birch. But not by much! HTH. P

@davidpascual962 Год назад

@@10MinuteWorkshop. I will watch your video, as always! On the other hand, your answer about the producer was not a surprise for me, I am part of Garnica and when I watched your video my reaction was something like: I have seen these boards before! Thanks again!

@richardstevenson2727 Год назад

👍

@RC-oi1gg Год назад

Hi Peter, thanks for the video. As always very informative and helpful. I have a project coming up shortly and need to make and install some draws using draw slides. Can you advise the best way to space the slides evenly within the height available in the unit to ensure the draw fronts all look uniform. It’s one of those things I’m struggling to get my head around. Many thanks.

@10MinuteWorkshop Год назад

You might want to wait a couple of weeks - next pair of drawers down are on side-mounted double-extension slides. 👍

@lebensschueler Год назад

2nd! (Luv the algorithm!)

@toshn4151 Год назад

Why hello there 😃

@lebensschueler Год назад

General Kenobi!

@MCsCreations Год назад

Damn, I'm late to say "General Kenobi!"... 😔

@lebensschueler Год назад

@@MCsCreations its never too late for Kenobi!

@riba2233 Год назад

Nice! A small question, did you use the oscillating mode on the jigsaw to cut those curves?

@10MinuteWorkshop Год назад

I did, but I'm never sure it really makes a difference. 🤷‍♂️

@riba2233 Год назад

@@10MinuteWorkshop yeah I was guessing it is just for faster (but rougher) straight cuts, not sure if it creates some trouble for curved cuts

@gjdewald Год назад

I noticed those old knees at the beginning. Off-topic, but not a question

@10MinuteWorkshop Год назад

Yep. No fun getting old. 🤷‍♂️👍

@redhornet07 Год назад

As my Grandfather said: "Getting old ain't for pussies..."

@vossievos3040 10 месяцев назад

Thanks

@10MinuteWorkshop 10 месяцев назад

Thank you! 👍🙌

@coop_coop007 Год назад

Useful, TY.

@lukeh3020 Год назад

Hi Peter. I’ve recently found your channel and it’s inspired me to make cabinetry my next career change. One thing keeping me up at night; on a previous video you lipped some MDF shelves with softwood before painting the whole shelf. Why would you do that? Thanks!

@10MinuteWorkshop Год назад

Thanks Luke and best of luck with the change of career. There’s a few reasons why you might want to lip a shelf like that, but strength and being able to take the knocks a bit better we’re my two main reasons. 👍👍