Turn shape is calculated automatically based on implement type. Only thing you can change is turn line location and the turn radius. You can play with those a bit to see if you can change the turn shape
@andrewwalter7079 cheers. Ours does it no worries on our machine with a 60ft bar just trying to get the neighbours set up to turn with a bit more of an arc. Only difference is they are running a 40ft bar.
It depends what you're linked to, we do implement control but not vehicle control other than just turns. On my seeder the Implement control will lift the drill at the end of the run, shut sections off etc.
I see you're using a bourgault tank. I have a problem with Case pro700 and x35 monitor not communicating with nudge feature, which then affects my ASC. So after seeing you using the autosteering I asked them what the fee is for autosteer license fee. Dealer told me it's not possible because bourgault hasn't done the software to enable this feature. Yet here you are. I'm running a 7950 tank. I assume you work for topcon, is this true?
Yep I work for Topcon. The steering ability is in the console for sure so it can be done, but it’s not a feature that’s supported by Bourgault so you would need to find a Topcon dealer to help get that set up
@@orourke ah ok, I’ve spent a fair bit of time in Sask but not much in Alberta, been as far West as Edmonton. I’m at Melrose South Australia, about as far north as you can farm so it’s pretty dry