Topdon BT200 Battery Tester, Charging Tester, Is It As Good As Midtronics & Snap-on Let's Test it!! 

Got to review You! Long but, you covered every aspect of the device on multiple vehicles. I like the magnet on the box as well. But every detail covered as silly as they may be. I have had a BT100 for 3+ years and it has saved me the cost of 2 battery replacements so far. And properly condemed a 2016 CX5 battery that was only 3 years old. At -15 temps it showed its short comings. Your review convinced me to purchase the 200 for myself and pass the BT100 on to a freind that was looking at it this past weekend. (Was just going to send him a new BT100.) You changed my mind. Suprised you don"t have more comments but it's such a infomative and hands on review you left no questions unanswered. Keep it up, Great job!

Thoroughly enjoyed this video.. Purchased one delivery tomorrow to check 3 batteries..Thanks 👍

just bought one of these ,,,non complicated, self explanatory, seems to work well, has the feel of GOOD solid professional quality, including the leads and clamps......and as you said has a great storage box to keep it safe and tidy ,,, WELL thought out ,,,,,,,,, thanks for the good real world use review

Though I didn't buy the topdon, I bought another import model and I've had the chance to compare it with a midtronics on about 6 batteries, the readings compare very well. I've also been monitoring my own car battery for the last 4 years, being able to keep an eye on the yearly degradation, the battery is now 7 years old and then showing up borderline at 50 percent health,. That I've got warning to replace it before I actually get issues... Doing it this summer

Great video, many thanks from Sweden 👍

Nice bit of kit 👌

Have found with mine that the terminals must be spotlessly clean to obtain consistent results. Cleaned mine with sandpaper before testing as I was getting considerably different readings from terminals that looked clean enough originally but obviously were not.

Thanks for your video and your time. It seems a bit confusing the charging test. Do you have to increase RPM first and then let the engine go back to idle and then press enter? Or do you have to press enter while the engine is high at 2500 rpm? Also, what does "loaded" means? I didn't see you turning on the lights, fan, stereo, etc, etc. Thanks 👍 for your time and help

Was hoping you would test with the top don And then immediately test with one of the others and see how they directly compare

The most crucial reading is the internal resistance, once you see it above 6mΩ the plates are sulfated and the battery is kaput.

Good vlog and I have just purchased one , although I can connect the positive ok I just cannot get the negative lead clamp to go on as it’s way to narrow and tight to reach at the back on my van btw it’s a Ford transit connect 🧐

I only wish they had longer cables. good tool

Seems like a nice bit of kit .Shame about the package waste ,better off supplying a basic box with a neoprene case to keep it in

Could you recommend a not too expensive OBD11 fault code reader that works with fords and can clear codes Thanks

Hi! Good review, I have bought one BT200 myself. But, now to a real question. First battery, it is rated 540A according to EN std. 540A (EN). So logic says, choose EN std on BT200. But, on BMW battery it says "900A CCA (SAE)" Shouldn't the BT200 then input 900A according to SAE std? I see u choose CCA std on the BT200.

On the 107. It was saying that before charging health was 7% but after a few minutes charging the meter was showing 19% health. This is confusing for me, why health of the battery depends on the charged status? What is then the bit that tell us how healthy the battery is really?

I just bought a new 12v 100ah gel battery (leisure) from Photonic Universe and it does not indicate anywhere on it the Test Standard info (eg the 540/EN bit in your video). I am clueless as to what setting to use at this point and what value to change it to. Any ideas ?

You can't charge or jump start a BMW direct off the battery. Is it OK to use a tester direct onto the battery?

Top Dong, the ladies said so.

The top don B20 is pretty cheap and comes with an app for the phone or tablet Does the same tests but you can sit in the car while you do them and read the info on the app.

So this model does nothing that the BT100 cannot do. Why pay more? I bought a non-branded BT100 for $15. It works just fine. No reason to pay more.