How to Replace the Diaphragm of a Toro EZ-Flow Plus Solenoid Valve - Tuttoirrigazione
Hello irrigation enthusiast! 🌿 I'm Federico from Tuttoirrigazione.it and today I'll show you how to replace the diaphragm of a very common solenoid valve: the Toro EZ-Flow Plus. This component is essential for the correct functioning of your irrigation system.
🔔 Subscribe to the Channel:
First of all, if you haven't already done so, subscribe to our channel and give us a nice like to support us in creating new useful content.
🔹 Common Problems with Solenoid Valves:
Solenoid valves, such as the Toro EZ-Flow Plus, can be damaged by dirty water, causing water leaks even when the solenoid valve is closed. This often happens in the absence of a filter upstream of the system.
🛠️ Steps to Replace the Membrane:
Remove the Upper Ring: Unscrew the upper ring to access the solenoid valve head. Be careful of the spring!
Check the Membrane: Check the membrane for damage or deposits that prevent an airtight seal.
Cleaning and Replacement: Clean any residue and replace the damaged membrane with a new one.
Reassemble Everything: Insert the new membrane, make sure the support ring is present, and reassemble the spring and the closing part.
💡 Helpful Tips:
Check the membrane against the light to detect depressions or damage.
Always use an upstream filter to prevent these problems.🌿💧
Useful Links:
Access our services: www.tuttoirrigazione.it/yt_tu...
You need some material by taking advantage of our e-commerce: www.my4garden.com
4 май 2024
