Total BAIT-MAKERS GUIDE To Soft Plastics; Lure Making How To Guide 2.0

Подписаться 107 тыс.

Просмотров 111 тыс.

50% 1

LINKS FOR MATERIALS:
Plastisol:
www.deadonplas...
www.pouryourow...
www.ispikeit.c...
baitplastics.c...
Molds:
anglingai.com/
www.btsmolds.com/
www.basstackle...
www.enforcerba...
www.lurecraft....
epicbaitmolds....
Injectors:
www.basstackle...
Colors & Pigments
www.deadonplas...
www.ispikeit.c...
www.pouryourow...
www.lurecraft....
Glitters:
www.lurecraft....
www.ispikeit.c...
Silicone Molds:
stankxbaitco.c...
Lure Eyes:
www.jettsonlur...
Affiliate link for AWESOME Pigments:
www.dipyourcar.com?ref=774
Welcome to the World's Worst Fishing! We are a fishing-centered TV program that does its best to bring you great fishing content & soft plastic bait making tutorials! We hope to provide our viewers with content that is fun, creative, informative and most of all entertaining. Sit back and watch us bring you the world's worst fishing!
We make fishing lures and soft plastic baits. You will find lure making tips and techniques as well as mold making tutorials and color ideas for your lure making
Warning: Making Soft Plastic lures can involve high temperature liquid plastic under pressure and is inherently dangerous if spilled or mishandled. Proceed making lures at your own risk.
Visit us on Facebook & Instagram!!
LIKE & SUBSCRIBE
#softplasticlures #luremaking #fishing

Опубликовано:

29 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 248

@WorldsWorstFishing 4 года назад

See video description for MANY links to bait making materials!! Thanks for watching.

@heathercummins1644 4 года назад

Thanks for revisiting this, Chris. Every time you go from the beginning, you change it just a bit, & I get something new out of it! 👍👍

@matthewwall4539 3 года назад

Iiiiiiiiiiiiiiiiiibi

@MegaPerson012345 3 года назад

Thanks for the links :)

@larrypayne1136 2 года назад

Great Video as always. I just started making soft plastics a month ago and I have learned so much from these videos. The best thing is how detailed they are about colors, molds, companies to order the through, cooking times, etc…. I recommend all rookies watch and subscribe to this channel.

@minisaxena284 Год назад

Replacement arrived!By the way, I did forget to mention that the original lure did have a decent strike however as most anglers will attest you can get a hit ru-vid.comUgkxCbNOWAGmn6nfbCbJDmasvBq7J38KZNw2 and fish will hang on and release lure. I used the replacement lure yesterday and ran thru a Shimano Waxwing, Kastmaster, Bobber (set to sink). I found the does run deep (I casting on the flats 3.5'). Make sure you adjust your rate of retrieve and rod tip angle (up) to prevent getting snagged on bottom. Used it a couple of times and action was very lifelike (looked like local bait fish for trevally), craftsmanship very good....however eyeball fell out. I asked for replacement and it is on it's way! It was very easy to change out treble to single inline hook.

@josephsalazar5831 4 года назад

I never get tried of your video always informed &excellent for viewing 👏

@WorldsWorstFishing 4 года назад

Appreciate it 😌

@chrismoloney285 4 года назад

My daughter was watching this with me, she already asked my wife to get her stuff for Christmas. #ParentingWin

@WorldsWorstFishing 4 года назад

Sweeeeeet.. just be careful

@chrismoloney285 4 года назад

Absolutely will sir.

@thelakecommander7632 4 года назад

Lol who puts a thumbs down on videos. Great 2.0 video. Keep up the amazing videos

@leomatute6871 3 года назад

This is the video I needed to see...good job.

@LargeCarGang 3 года назад

you should try and spin the mold while your doing a laminate and see what comes out!!!

@The_Bass_Stunters 4 года назад

Need to find a zoom ultravibe speed worm mold CNC aluminum preferably. Have absolutely wrecked the Bass this year with that bait in the grass.

@michaelleady9089 4 года назад

Great instructional video But I would like to have some twister tail grubs with that green dip your car color and Chartreuse I guess I’ll have to make them Someday lol

@WorldsWorstFishing 4 года назад

get on it

@michaelleady9089 4 года назад

If I ever do get on it hopefully I will I’ll definitely use dead💀⭕️N Plastics

@gurohyena3649 4 года назад

I want to start investing a little at a time so I can start making baits.

@firennc 4 года назад

Chris, at the 2340 mark your talking about the bubbles. How long will it take for the bubbles to disappear or will there alway be some without the use of a vacuum chamber? Thank you for these videos! I now have a new hobby!

@GRADYGTHOMAS 3 года назад

Do you sell the plastics shown in the thumbnail for this video? Like the ones at 36:11 Ifso where please? I'd love to buy a bunch of them.

@jeff_penner 4 года назад

Could you use food colouring to die the plastic???

@WorldsWorstFishing 4 года назад

Probably as long as it's not water base

@jeff_penner 4 года назад

@@WorldsWorstFishing Thanks

@jackflo5686 4 года назад

Quick question, when making senko style baits why do the airbubbles always stock up in the tail?

@WorldsWorstFishing 4 года назад

yes..they get forced back

@kyliexiong6244 4 года назад

How long does it take for the plastics to cool down and harden up? I’m just starting and really wanna get into it!!

@WorldsWorstFishing 4 года назад

A minute or so

@edthe1owapyr020 4 года назад

Could you please maybe demo one or two of the cheap kits from doitmolds.com that come with everything? Maybe they’d give you kind of a promo kit to demo or something

@WorldsWorstFishing 4 года назад

Yeah if something like that was sent to me I might give it a shot..

@edthe1owapyr020 4 года назад

World's Worst Fishing maybe reach out to them or something I want to order one but have no clue what they are all like

@BOURNE354 2 года назад

not worth the cost to purchase the double injector and the angler ai mold to layer a crawdad lmao ,You get your equipment free ,are you saying you dont? Ai and death plastics use to be in the same building now just up the street from each other and you do their advertising

@WorldsWorstFishing 2 года назад

Do what?

@charlottesuleyman887 4 года назад

Very nice 😍💋 💝💖♥️❤️

@marctheriault 4 года назад

I've gone through all of your "intro" videos over the past couple of weeks and was inspired to dive right in. The orders are starting to come in and I was able to do a couple of the 4" AI swim baits this afternoon as a test run. Still more orders on the way (pretty much ordered a few more things with every new video I watched), but I even gleaned a couple more suggestions from this one. I can attest that this 2.0 was a perfect summation of all your previous demos and will likely inspire many more converts like me. Well done, sir.

@OutdoorMike 3 года назад

First 14 seconds and I am sold! Best beer ever! I can't wait until it gets out to AZ. They just announced that they will be distributing it out here in the next year or so.

@josephdisselkamp2586 4 года назад

I have a couple doit molds. They're not cnc quality but all baits shine when wet! Simply spray them with high temperature engine paint (I use clear) and you'll get a much nicer finish, or you can always clear coat them. I agree cnc molds are a better finish straight from the mold!

@Grahamwilde20 4 года назад

I got a Senko mold and I only get one or 2 and I get so much air bubbles and at the end and I go slow and when I go faster I get the bottom one it doesn’t fill all the way and I kinda need help to fix it what tips do you have, do I need a bigger injector because it 45 mil and fills it to the top almost and then i have to pour like half an inch with the cup and it’s 4 cavity 5 inches?it fills the 3.5 in ripper fine

@Grahamwilde20 4 года назад

It fills the 3.5 in ripper

@WorldsWorstFishing 4 года назад

sounds like you need a vac chamber to just get rid of akk bubbles

@Grahamwilde20 4 года назад

Mabe but it’s like the mold only fills like half the Side on the end and fills the rest of the mold at like the front so I need to go faster to fill the mold end or do I go slower

@wswsparks4542 3 года назад

You should do I video where you make the same bait with different plastic blends then compare actions in a bucket

@thegirls3754 4 года назад

I was sitting on my couch when I see this and now I'm going to make soft plastics !!!

@WorldsWorstFishing 4 года назад

Get er done

@Joxman2k 2 года назад

6:08 uummm That is not a heat gun. It is a digital thermometer. A heat gun blows hot air like a hair dryer. I know you know this and misspoke, but to those out there who dont know it is a digital thermometer. They have become reasonably cheap lately and can come on sale at a good price. Well worth it :)

@jacobpicard25 10 месяцев назад

Am I accurate in think the saltwater plastisol sinks? I know dead on has sinking and floating but don’t see saltwater labeled on the floating. As a saltwater fisherman I definitely want my paddle tail to float.

@fannyrezavianto4811 3 года назад

Plastisol+resin or catalist Please answer my cuestion Iam confuse....thank you from indonesia

@sarlador1240 4 года назад

Have you ever thought about mounting a camera over your workspace? Would provide a better view and would be out of your way.

@haileylirette1701 3 года назад

Stop recommending bass tackle for injector cuz they have been out for a long time

@hairyhydro 3 года назад

Show attaching eyes. pull the baits out, and then "Magic" they have eyes......

@Whoisssq 4 года назад

Do you put salt in your baits? Does the dead on plastic black bucket need salt in order to sink? If you add salt to the black bucket will it sink too fast?

@brookelaughter4960 3 года назад

So there's no patents or copyrights on the generic molds? Just your color combinations are custom to your business?

@dipster14 4 года назад

Ayye, my guy i recognise that bottle 🤣. Good taste in brews. After i binge watched your videos, i kinda want to get into making my own baits. Also subbed to Larry Melton JR too.

@WorldsWorstFishing 4 года назад

You should! larry is a cool dude

@michaelgarcia4210 4 года назад

Hey guys! I’m 15 and have my own recycled fishing lure business. I’m currently driving home from the ER after getting 3rd and 2nd degree burns from some hot plastic splashing into my hand. Definitely some of the worst pain over ever felt, I can’t stress enough the importance of PPE. If I was simply wearing my gloves the burns would’ve been severely less. If you’re just getting into bait making, invest in some good PPE, you’ll thank yourself in the long run. There’s no such thing as too safe, learned that lesson tonight.

@WorldsWorstFishing 4 года назад

glad you are okay!

@johnrobinson7679 9 месяцев назад

I’m fourteen and just starting in making soft plastics.

@jhunsondelatorreparangue5018 3 года назад

What name plastic to use making soft lure..coz i want make my own lure thank u .

@grain30ashby76 2 года назад

I am having troubles with having dents in my worms how do I fix that

@briangilges1355 4 года назад

So you use the griddle in the video to keep plastic warm in between shoots?

@rloera601 3 года назад

Vacuum pump ? Where did you get it. It was post in rest of things to start off.

@mikeockler7121 4 года назад

6:38 CAUTION: Sunglasses are a must when dealing with the awesomeness that is Dead On Plastix

@WorldsWorstFishing 4 года назад

Haha I was blinded by it's awesomeness

@jeffreis5194 4 года назад

Wish I had the heart like for that one

@upthecreekyt 3 года назад

I'm binge-watching your channel because I want to get into making my own baits. You are sharing some valuable information. Thank you.

@WorldsWorstFishing 3 года назад

Thanks..I think I have a good resource

@lengeehive1371 4 года назад

What was that other craw mold and which website can I buy it from.

@Thegoat-rg7kp 3 года назад

Can u list everything I would need to start like molds and salt and all that

@APC_CHENNAL. 2 года назад

Link shopee,, saya suka karya anda

@Catfish00150 6 месяцев назад

Been writing down notes!!! I’m starting to get into this, I will be making my own Crappie lures soon!!! Thanks

@WorldsWorstFishing 6 месяцев назад

Awesome 👍👍

@beezyfishingoutdoors_2168 4 года назад

This was Awesome 👌🏾 thanks for the lesson.... I really enjoyed this👍🏾👍🏾🤙🏾💯🔥🔥🔥🔥👏🏾👏🏾👏🏾👏🏾

@WorldsWorstFishing 4 года назад

Thanks for watching

@rloera601 3 года назад

Thank you for help me at the lure making!

@jackdelbosque2156 Год назад

Where can I find a ball tip mold for salt water plastics

@Bassmaster1256 4 года назад

I was gonna try Dead On Plastics but the freight from Florida to California would have cost me more than the product.

@WorldsWorstFishing 4 года назад

That doesn't sound right....dead on is in michigan, I get it mailed to FL for $30 for 5 gal

@bucksandbass8081 4 года назад

Thank you for the information I was trying to get an idea of the cost for everything and you have the best example of a craft that is very interesting to me

@WorldsWorstFishing 4 года назад

That's my goal 🙂

@aventuradepescaenbajacaliforni Год назад

Exelente tendrás venta de moldes por Amazon

@bassboxingoutdoors 3 года назад

I've been watching for a while now and my wife is going to get me all this stuff for Christmas too start doing baits on my channel too and plus it looks really fun.

@southernoutdoorsmen1243 3 года назад

I've watched you for about 2 years now and know everything about the hobby and still love these types of videos😂👍

@WorldsWorstFishing 3 года назад

Well we never really know everything about this hobby, I learned something new every week it seems

@zacharythomas6134 4 года назад

Not first because I was sleeping but I probably would have been first.

@WorldsWorstFishing 4 года назад

sweet

@drewkolb2129 4 года назад

What about the separate color tail pieces? I see molds for the worm and the tail....how does this work?

@WorldsWorstFishing 4 года назад

Inject tails, place tails into body mold and Inject body mold.

@mrb9502 2 года назад

Is anyone making custom molds?

@basscatlildave 4 года назад

Nice details on where to start.

@bobsaget6720 4 года назад

I was wondering if there's any plan to sell kits for bait making? Maybe something like different tiers/levels, 1-2-3 etc, that comes ONLY with equipment/hardware for each tier/level. No molds or plastisol but maybe include an option for molds/plastisol? It's late in my part of the world and maybe this is a sleep deprived rant

@mike06422 4 года назад

Been slowly putting everything together this year buying in small batches and did my first baits today.... I now see how addicting this can get.

@WorldsWorstFishing 4 года назад

Ain't it great

@dyingslowly666 4 года назад

Lead Jigs are just as addicting lol

@dannywarrent6435 Год назад

How do you clean your cups after use

@awesum0 3 месяца назад

is Basstackle still your recommended injectors?

@WorldsWorstFishing 3 месяца назад

Absolutely

@quickresponsefishing 4 года назад

I like how you encourage and inspire people to do it as well. My kids really want me to do it with them and create really cool designs and our own bait.

@WorldsWorstFishing 4 года назад

Y'all should give it a try

@quickresponsefishing 4 года назад

@@WorldsWorstFishing they don't know it but I made a note on my phone based off your videos where to buy, best quality, etc. Setting cash aside I think it will be a Christmas surprise.

@bobriley3963 4 года назад

What size injector do you use in all your videos? The one with the handle and what brand is it?

@WorldsWorstFishing 4 года назад

the handle injector is no longer made...I like 9-10 oz for most single injection

@lorenzocueva263 2 года назад

How can I order salt water lures?

@DA7545 4 года назад

I dare you to use gold leaf on a bait.

@joelramossaucedo6244 2 года назад

Excelente video amigo!!!

@miguelpoulin 3 года назад

Where did you get the senko mold I'm looking for one and don't find one

@larrypayne1136 2 года назад

Do it

@chrisfrancis4627 9 месяцев назад

nice 38special pun

@Hayley070991 2 года назад

*Fun little bait great for ponds. This thing casts really well for its size, I was surprised. Good for when you need to downsize and gets smaller fish to commit*

@darkfysh 4 года назад

Came across your channel through Marling Baits, Amazing stuff! this vid especially was so informative. Thank you. Maybe you could team up with Marling and one of his molds and pour together, that would be epic!

@Gale_Force_Raceway 4 года назад

Wish I could give this 4 likes..... best how-to yet, thanku sir

@fishermankev 4 года назад

He still has the paprika

@WorldsWorstFishing 4 года назад

Oh yeah

@LostInfernoFireDragon 4 года назад

Hey what do you think of doing a triple hyper shirt jerk baits.

@WorldsWorstFishing 4 года назад

They are sexy!! Done many of them

@LostInfernoFireDragon 4 года назад

@@WorldsWorstFishing Are they really

@i2aspire 4 года назад

What do you think of Paragon Effects Chameleon? I ordered this and some basic colors too

@WorldsWorstFishing 4 года назад

It's super cool..add it to regular colors is best

@sufferedenuf 4 года назад

I experiment with it in epoxy. Makes a great effect on the side of a small boat!

@wolle2124 3 года назад

Hi i am Wolle from Germany, thaks for the nice Clip. It was amazing

@aarondavis8224 4 года назад

What happens if you mix your color and flake into the plastic before you heat it in the microwave? It just seems like it would be easy to mix in the color when the plastic is liquid and not have to stir or mess with a hot cup of plastic when mixing colors.

@WorldsWorstFishing 4 года назад

It works well that way however you cannot see your formula when the plastic is raw.. I like to add it to cooked plastic so I can see the color building process and not add too much

@aarondavis8224 4 года назад

@@WorldsWorstFishing So if I had a formula that I was familiar with and added it to the cold plastic then heated it up I would get the same result? Also would the quality of the plastic be better if it went through one less microwave heat cycle? If you were trying to create a new color I can see where heating it first would be an advantage though.

@WorldsWorstFishing 4 года назад

@@aarondavis8224 in my opinion your color turns out better when added to cooked plastic, that is less exposure the glitter has to the microwave. I see absolutely no advantages to adding your color before cooking.

@jamescooper694 4 года назад

do you make electric grape like how you buy from Berkley powerbait 7 inch worm

@WorldsWorstFishing 4 года назад

you can make anyting you see on shelves

@jamescooper694 4 года назад

@@WorldsWorstFishing what would you recommend what color to use

@danielwood2134 4 года назад

Hey criss how about using dollar tree finger nail polish to make some 🐛

@coreypeterson2695 4 года назад

Awesome video

@IVIusicMayhem 3 года назад

Do you have any site recommendations for a custom mold? Can be silicone or steel.

@fabricecorouge5149 2 года назад

Il sont super 😉

@mjeepster 4 года назад

Pop the top my friends, i think I have another round! And watch the master..🍻

@MrJustus88 2 года назад

I want a few

@rauttam7395 4 года назад

Can you make a 12 inch silicone swim bait mold and fish with one of the swim baits you make

@WorldsWorstFishing 4 года назад

12 might be a little large haha

@jeffreis5194 4 года назад

@@WorldsWorstFishing that's what she said lol

@owen8703 4 года назад

105 shipped from bait plastics

@WorldsWorstFishing 4 года назад

That's true..they did undercut their pricing to $70 a pale in order to offer pricing equal to what it would be without shipping. They still have to pay freight like everyone else, free shipping is a myth in any industry. Lucky for them they can still make some sort of margin despite lowering values. BP is good plastic.

@tazz3203 3 года назад

Anyone have an eel mold they would recommend?

@WorldsWorstFishing 3 года назад

I don't know that I've seen one of those, but a quick Google search should let you know

@tadwilson2892 4 года назад

How do you laminate the ripper mold? Would you put the injector parallel or not?

@WorldsWorstFishing 4 года назад

It will not laminate top to bottom no matter what you do, the cavity layout does not support it

@tadwilson2892 4 года назад

What would you recommend for a swimbait like the ripper I can laminate.

@АлексейСмирнов-ж1з 3 года назад

subscription from Russia!👍🏻

@WorldsWorstFishing 3 года назад

welcome!

@perfectator 4 года назад

Thank you for this video

@WorldsWorstFishing 4 года назад

Thanks for watching

@alekdeckert2190 3 года назад

Don’t even mess with me I got an eight cup Pyrex 😂😂

@time9667 4 года назад

Love your video I keep on watch

@WorldsWorstFishing 4 года назад

Sweet

@ribbit5021 4 года назад

This helped I am starting and my friend is teaching me so now I know what to do

@jaychino1621 4 года назад

Fan of your work. At what temp do you add your color and glitter? Most glitter temps max at 350, so i want be careful how much i reheat if i need to correct? What is best temp to inject at? Thanks.

@WorldsWorstFishing 4 года назад

I add it when the plastic looks right haha..I rarely temp anymore, but lower is better,

@jasonking5840 4 года назад

Thanks for the great video. Setup work area with help from one of your pa friends. Who is my son’s buddy. Been having a blast since. FYI really like open pours

@WorldsWorstFishing 4 года назад

👍👍🙂

@pimpshack81 4 года назад

Man I know I sound like a fan boy... but boy am I a fan👊👊👊 the way you explain how and why is just so precise keep making us all 🔥🔥 content . Thank you for all you do 🤘🤘🤘

@WorldsWorstFishing 4 года назад

Pleasure to have you as a viewer

@zachsmith1878 4 года назад

Great video love the content

@WorldsWorstFishing 4 года назад

Thanks

@johncox5681 4 года назад

Great job teach. I learn something every time I watch.

@Tylerman 4 года назад

I started make lures because I seen your first bait making video on my recommended!!!

@WorldsWorstFishing 4 года назад

Hell yeah!

@johndedrick4619 4 года назад

Thanks again, Chris, for examining things so clearly!!! Have started gathering tools needed for what will be my new hobby!!! So much closer to a full feet first jump into bait making!!😇

@WorldsWorstFishing 4 года назад

Best of luck!