Toy-Ikea-MicrowaveController
Toy Ikea Microwave Controller
Microware Controller (Arduino Based)
for Ikea Kitchen DUKTIG
LEDBERG LED spotlight
SKaccess by Simon Kong
www.skaccess.com
ATTiny841
------------------------------------------------------------
- Features
increment timer by 5 sec from 0 to 60 sec
increment timer by 10 sec from 1min to 5 min
increment timer by 30 sec from 5min onwards to 51min
press the rotary knob to start/pause countdown
light will be on when countdown is active
low tone buzzer noise when counting down to simulate the microwave being on
opening the door while countdown is on will pause countdown
when the door is open, light will be on
when the countdown finishes, will display "End", if the door is not open,
it will do the End melody again every 2 min, untill the door is open.
this is to remind the user that there is still food in the microwave.
V 1.0 - 30/06/2019 - Initial Release
------------------------------------------------------------
- PCB Board Used
www.skstore.com.au/electronic...
github.com/SkullKill/Toy-Ikea...
more pictures in the wiki
github.com/SkullKill/Toy-Ikea...
------------------------------------------------------------
- Code Used
github.com/SkullKill/Toy-Ikea...
------------------------------------------------------------
- Video
• Toy Ikea Kitchen DUKTI...
------------------------------------------------------------
- Product Used (included)
15mm Aluminium Knob
10mm Spacer/Standoff and M3 Screws
------------------------------------------------------------
- Product Used (not included)
Ikea DUKTIG Play kitchen, birch
Article Number : 403.199.73
www.ikea.com/au/en/catalog/pr...
Ikea LEDBERG LED spotlight, white, 4 pack
Article Number : 103.517.33
www.ikea.com/au/en/catalog/pr...
Note: the cable with the Dark Lines is the -ve/gnd cable.
But better to double check with a multimeter.
magnetic door sensor (reed switch) [could also use a micro switch]
3mm Acrylic sheet
50mm L Angle Bracket
www.bunnings.com.au/zenith-50...
various screws and bolts
4G X 12mm timber screws
washer 5/32" / M4
Bolts & Nuts 3/16" X 15mm / M5
------------------------------------------------------------
Library Used
github.com/SpenceKonde/ATTiny...
miguelpynto.github.io/ShiftDi...
www.pjrc.com/teensy/td_libs_E...
------------------------------------------------------------
Sketch uses 6850 bytes (90%) of program storage space. Maximum is 7552 bytes.
Global variables use 226 bytes (44%) of dynamic memory, leaving 286 bytes for local variables. Maximum is 512 bytes.
3 июл 2019