Toys and Joys 1929 Ford Stake Bed Truck Part 2

Making a Simple Toy Truck

Я тоже так могу

Я НЕ ОЖИДАЛ ЭТОГО!!! #Shorts #Глент

ЗАКРЫЛИ И ОПЕЧАТАЛИ МАГАЗИН! ИЗЪЯЛИ АЛКОГОЛЬ НА 1.500.000 руб. НЕИЗВЕСТНЫЙ БЫКУЕТ ПРИ ПОЛИЦИИ. Ч. 2

ЭТО - БАТЯ ВСЕХ ГОРОХОВ В PLANTS VS ZOMBIES!

Toys and Joys 1929 Ford Stake Bed Truck

Acutabove Woodworking

Подписаться 70 тыс.

Просмотров 16 тыс.

50% 1

Видео Поделиться Скачать Добавить в

While the original intention was to have this build series air on only Tuesday, I have decided that I will air the 7 episodes back to back to allow those of you who are interested and want to build your own, a chance to follow along instead of having to wait 2 weeks between episodes.
So without further adieu, I bring you part 1 of a 7 part series on making the Toys and Joys 1929 Ford Stake Bed Truck build.
I hope this series provides you with enough instruction, to give you the confidence you need to make your own version of this model.
If you haven't, please consider liking and subscribing to the channel. Click the bell and then you won't miss notifications of future episodes of the show. We have a lot of fun here every Tuesday and Friday and I hope that you will consider becoming a part of that.
As always, I want to thank you all for tuning in to the show. I truly appreciate it.
If you are interested in the Toys and Joys pattern for this truck, you can find it here. toysandjoys.com/82-1929-ford-...
If you are interested in the shop made cam clamps video, you can find it here. • Shop Made Cam Clamps
There has been a bit of an update on this project. If you are interested in seeing the update, view the update show at the following link.
• Show Updates 2023 Part 1

Опубликовано:

29 ноя 2021

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 67

@unjje 2 года назад

This is great timing I was just looking at their website last week. Now I know what my first model to try because I will always have this as a reference thanks to RU-vid.

@acutabove_woodworkings 2 года назад

I hope you find the reference to be helpful and that you are able to make a successful model. As always, I'm here to answer any questions you might have, either through Facebook or the channel's email address. Good luck on your project and thanks for tuning in to the show.

@Phenrica 2 года назад

From a fellow model maker I’m enjoying your approach and a great tip re the melamine boards it never crossed my mind so now it’s going to be baked into my assy process 👍🏻 Cheers Steve

@acutabove_woodworkings 2 года назад

Glad that you were able to take something positive away from the show Steve. Thanks for tuning in and for taking the time to leave the kind words. It's very much appreciated.

@pietdixon3232 2 года назад

Lovely! When I saw the "blue print" I thought that was me finished. I can never work out what's what and where to put it. You did a first class job of explaining every thing in detail, how it fits and where. Thank you. I'm away to my scrap pile and pull out what I need. By the time Tuesday rolls round I will be sitting at my bench having caught up with you and waiting for instalment 2. Lovely, excellent, smashing.

@acutabove_woodworkings 2 года назад

Glad that you enjoyed the show Piet. I hope this will give you the confidence to attempt your own model. Good luck with your build and thanks for tuning in.

@brucemiller607 2 года назад

Nice job!!! These builds are so much fun but be careful once you build one another will be on it's way soon after. LOL

@acutabove_woodworkings 2 года назад

They are definitely addictive Bruce. I have so many that I have made and so many sitting in the wings waiting to be made. I hope you enjoy the series. Thanks for tuning in to the show.

@paulsmessyworkshop 2 года назад

Kenny, glad to see another model being built. On your previous show I noticed the truck sitting on you workbench and meant to mention that I hoped you were going to make a video of it. This should be a great build to watch. Thanks.

@acutabove_woodworkings 2 года назад

Thanks for the kind words Paul. I hope you enjoy the series. Thanks for tuning in to the show this week.

@markduggan3451 2 года назад

This looks like it's going to be great. I'm going to have to wait for my thumb to get better then I'd like to give this one a go.

@acutabove_woodworkings 2 года назад

Wishing your thumb a speedy recover and wishing you good luck on your model. I hope it's successful Mark. Thanks for tuning in to the show

@stuartmckendrick4845 2 года назад

This is exactly what I need many thanks sir I shall be watching again thank you

@acutabove_woodworkings 2 года назад

Glad to hear it Stuart. I look forward to hearing your future comments on the series. Thanks for tuning in to the show.

@michaelmarchione3408 2 года назад

Oh yah! This is going to be a great series! Except for balsa free-flight and u-control planes, I've never built a wooden model like the type you make. And that was way back in grade school and high school. But I do still want to design and build a pond boat. The wooden sailing ship models that kids and adults used to sail in ponds and urban cement/stone ponds in the early 1900's. Well the snow is on the ground for good here in northern NY, so I have all winter lol. What a great start for this project. Take care Ken!

@acutabove_woodworkings 2 года назад

I hope you do make those boats Michael. I'd love to see them if you get them finished. Thanks for the kind words on the show and for tuning in this week. Good luck with the snow. I hate snow.

@michaelmarchione3408 2 года назад

@@acutabove_woodworkings LOL! I hate snow too! If you look on ebay, Ken, you can get an idea what those wooden yachts look like. I was thinking of cutting them on the scroll saw like you would a bowl. I just have to decide on how many layers and their thickness so I can know the angle of the cuts. Take care!

@PBGSK1 2 года назад

Fantastic. I will watch this series and then get plans to make one. Thanks

@acutabove_woodworkings 2 года назад

I hope the series will give you the confidence and the knowledge you need to make a successful model. Thanks for tuning in to the show.

@samspade4634 2 года назад

Kenny, Thank you! Today was my first time at your channel and although I've only seen one video, I am a subscriber. Some might think your pace is slow, however I can easily follow because you explain very well. I purchased this very set of plans about 2.5 years ago and after watching episode #1, you have given me a push to get that box off the shelf and continue where I stopped. I just wanted to say thank you so much for your positivity!

@acutabove_woodworkings 2 года назад

Well I'm glad that I was able to get you moving on this project Sam. In this tutorial series, I demonstrate every piece of the model so feel free to use the series to help you where you need it. Of course, you can always ask questions if you like and if I am able to help, I would be more than happy to do that. You can leave questions here on the channel or through my website contact form or you can email me directly at kennye@acutabovewoodworkings.com. Visit the website at acutabovewoodworkings.com. Good luck on your project and thank you for subscribing and for tuning in to the show.

@samspade4634 2 года назад

@@acutabove_woodworkings Thank you for your kindness. I wanted to ask why you use yellow glue instead of CA or superglue? I'm not a super glue person, but I was wondering if you wanted to speed up the drying process??? Thanks again.

@acutabove_woodworkings 2 года назад

@@samspade4634 I'm not a fan of CA glue at the best of times and especially for these models. CA glue does a great job at temporary repair or adhesion and it is great when used as a finish for turned items like pens or razor handles but in a model build, it just causes problems. In order to get enough CA on the parts to allow good adhesion and penetration, the squeeze out that it generates causes an ugly mess that will no longer take a finish. Yellow woodworker's glue penetrates the surface very easily and sets a lot faster than you would think. Usually, a part will set within 15 minutes or less and the squeeze out that is generated is easily cleaned up using water and a cotton swab allowing a finish to be applied perfectly after a light sanding. CA glue? Not so much. While some model builders on RU-vid use CA glue exclusively and make it look like the miracle product of the woodworking world, they are not telling you the whole story and from personal experience, I can say that it is the glue to avoid when it comes to woodworking. I hope this helps.

@samspade4634 2 года назад

@@acutabove_woodworkings Very, very well explained. I understand and actually agree with your "experience" with CA glue. If it didn't run everywhere, the lid wasn't put on correctly (by me) and before you know it, I am out of glue. Thanks so much for your help.

@acutabove_woodworkings 2 года назад

@@samspade4634 You're very welcome. Feel free to ask any questions you have.

@sijameswoodworking1616 2 года назад

Fantastic, been looking forward to another model build series, looking forward to the next episode 😊

@marcelo403polo2 2 года назад

+1 here

@acutabove_woodworkings 2 года назад

I'm always weary of posting model build videos as I'm not sure if there will be a continued interest in the entire series. I hope that this series doesn't disappoint. Thanks for tuning in to the show this week.

@acutabove_woodworkings 2 года назад

Glad to hear that you will be tuning in Marcelo. It's appreciated.

@joelcopeland3018 2 года назад

Great instruction, Looking forward to the rest of the build...

@acutabove_woodworkings 2 года назад

I hope you enjoy the rest of the series Joel. Thanks for tuning in and for the kind words. It's appreciated.

@newtonmiller8810 2 года назад

Kenny, you should be a motivational speaker! BTW, Happy Festive Season to you, your family and community, stay safe and well, regards Newton

@acutabove_woodworkings 2 года назад

Thanks for the kind words and a Merry Christmas to you and yours as well Newton. Thank you for tuning in and for taking the time to leave you comment. It's appreciated.

@wadesaunders583 2 года назад

Hoping to do this one...thanks for the series. They make a nice bi-plane model as well.

@acutabove_woodworkings 2 года назад

I hope you do make this one Wade. It's a fun model and with this tutorial, there are no questions as to how to go about making the pieces. I've made the bi-plane (I believe it was a Fokker II) and it was a wonderful model to make. The plans for that one are a little older but there were still fun. The most difficult part of the bi-plane was drilling the holes for the landing gear. Either way, thanks for tuning in and for taking the time to leave the comment. I appreciate it.

@wadesaunders583 2 года назад

@@acutabove_woodworkings can you remember if you drilled the holes while still a rectangle block? I may tackle the plane first.

@acutabove_woodworkings 2 года назад

@@wadesaunders583 I did not and I think that is where my problems started. I would suggest drilling the holes while it is still able to be say squarely on a drill press for drilling and then shape the body afterwards. I hope this helps Wade. Good luck on your build.

@randyrockwell6136 2 года назад

Great video highlighting a great company! The plans from Toys and Joys are great. I am currently building their articulating loader. I really like the fact that you stressed being safe. It is easy to get into trouble making some of the small parts theses models require. I totally agree that it is a good idea to spend some extra time sitting and thinking about how you want to make a specific part and the steps required! Great job as always Kenny 🤠

@acutabove_woodworkings 2 года назад

Glad that you liked it Randy. I've many countless models from this companies plans. I usually modify them to make them my own and add my own little touches and that's part of the fun for me as well. I have that same pattern that you are making. I haven't made it yet, but I will. I usually get ahead of the game with filming and then take a break from the show and make a model. It's a good system that works for me. LOL. Thanks for tuning in. I hope you enjoy the series.

@marcelo403polo2 2 года назад

Love those series of model builds.

@acutabove_woodworkings 2 года назад

Glad to hear it Marcelo. I hope this one doesn't disappoint. Thanks for tuning in to the show.

@marcelo403polo2 2 года назад

@@acutabove_woodworkings those never dissapoint me. It’s my hobby as well building those

@BigDen06 2 года назад

I've made 3 of these Kenny, good starter model project.

@acutabove_woodworkings 2 года назад

They are definitely a fun build Dennis. I'm sure that whoever received your models is very lucky. Thanks for tuning in to the show.

@meawayfromhome 2 года назад

Hi Kenny, another great series coming, well done mate looking forward to them all.

@acutabove_woodworkings 2 года назад

Glad that you liked it Philip. I hope you continue to enjoy the series in the coming weeks. Thanks for tuning in to the show.

@auburn.JoaoDuarte 2 года назад

Awesome

@acutabove_woodworkings 2 года назад

Glad you liked it. Thanks for tuning in.

@zulfiqaraliansari174 Год назад

Very Lovely Explained, keep it up

@acutabove_woodworkings Год назад

Glad that you liked it. Thank you for tuning in to the show.

@brianmcgrath2565 2 года назад

I just finished watching the 7 video's for this truck, absolutly inspiring. I like that you make ALL the pieces rather than purchasing ready made ones. The level of detal and explanation to great. Have you ever used CA glue? Would it work for this truck?

@acutabove_woodworkings 2 года назад

Thanks for the kind words on the series Brian. I'm not a big fan of using CA glue in my model builds. It just causes too many problems for me. Squeeze out is hard to clean up, avoiding squeeze out by using less glue doesn't always give enough adhesion, using accelerator spray to get an instant bond doesn't allow pieces to be shifted etc. I much prefer the flexibility of good old fashioned wood glue. I hope this helps. Thanks for tuning in.

@randysmith3828 2 года назад

I can’t wait to see more, that looked awesome sitting on your bench in the video you posted on Friday. I love that style those old cars and trucks had, especially the 20’s 30’s and 40’s. Did you spend a lot of time with a jointer and planer to prep the wood for this project?

@acutabove_woodworkings 2 года назад

I didn't spend much time at the jointer at all Randy. I make a lot of these models from scrap and off cuts. If I need larger pieces, like when I am making the tires, I will only mill what I need as I don't like having extra boards lying around the wood rack. I'd rather keep it in its rough cut form to prevent any warping. I hope you enjoy the series sir. Thanks for tuning in to the show.

@zks-dr3oi 2 года назад

hola hace tiempo compre este plano y hoy me voy a dedicar hacerlo...mi consulta los planos en que formato los tengo que imprimir ya que los imprimo en mi impresora normal y no salen bien...quisiera saber si están en A4 o A3 ..espero la respuesta , gracias

@acutabove_woodworkings 2 года назад

I am not sure what size paper to print these on. The are blueprint sized paper. I could always measure one for you if you like. Thanks for tuning in to the show.

@zks-dr3oi 2 года назад

@@acutabove_woodworkings muchas gracias estimado pero ya vi como imprimirlos con una impresora normal en formato A4. solo hay que configurar la impresora...saludos

@stevekeller8890 2 года назад

Who makes that marking gauge you use?

@acutabove_woodworkings 2 года назад

That marking gauge is called a T-Rule and they are manufactured by INCRA Tools. They are available at most woodworking suppliers or directly from INCRA. Here's a couple of links for you. I hope it helps. www.leevalley.com/en-ca/shop/tools/hand-tools/marking-and-measuring/rules/58877-incra-t-rules incra.com/measuring_marking-trules.html Thanks for tuning in to the show.

@josephinesei568 Год назад

Do you have plans for this or maybe a 1932 ford fordour sedan? I have a friend that would love to be able to build the layer but she would like to build this one to

@acutabove_woodworkings Год назад

I haven't really thought about doing that particular model Josephine. I may do it on a future show though and will add it to the list. I am assuming that you mean pattern #52 from Toys and Joys. Thanks for tuning in.

@johnmigl3601 2 года назад

Where did you get the clamp you use on your bench

@acutabove_woodworkings 2 года назад

That clamp is the Veritas, Quick Release Wonder Dog and they are available at Lee Valley stores. Here's a link. www.leevalley.com/en-ca/shop/tools/workshop/workbenches/benchtop-accessories/74622-veritas-quick-release-wonder-dog?item=05G1030 I hope this helps. Thanks for tuning in to the show.

@tony4921 Год назад

Thank you for the highly detailed videos. I have started building the truck. One question: you have listed an update link: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-_TnvASEqj_g.html. Unfortunately, the link says that the video is unavailable and that it is private. Can you please correct the link?

@acutabove_woodworkings Год назад

Sorry about that Tony. Due to scheduling conflicts, the update show had to be moved. It doesn't air until Feb 14 and Feb 21. The good news is that the update doesn't affect the build or the ability to make this model. I hope you will tune in for the update shows in February. Thanks for tuning in.

@armandovaldez9148 10 месяцев назад

Como puedo yo conseguir los planos yo soy afisionado a hacer carritos de madera parte 1 de ford 1923

@acutabove_woodworkings 10 месяцев назад

The plans are available to purchase at toys and joys website. www.toysandjoys.com. I hope this helps. Thanks for tuning in to the show.

Далее

Toys and Joys 1929 Ford Stake Bed Truck Part 2

25:15

Toys and Joys 1929 Ford Stake Bed Truck Part 2

Просмотров 9 тыс.

Making a Simple Toy Truck

20:33

Making a Simple Toy Truck

Просмотров 36 тыс.

Я тоже так могу

00:12

Я тоже так могу

Просмотров 897 тыс.

Я НЕ ОЖИДАЛ ЭТОГО!!! #Shorts #Глент

00:19

Я НЕ ОЖИДАЛ ЭТОГО!!! #Shorts #Глент

Просмотров 1,8 млн

ЗАКРЫЛИ И ОПЕЧАТАЛИ МАГАЗИН! ИЗЪЯЛИ АЛКОГОЛЬ НА 1.500.000 руб. НЕИЗВЕСТНЫЙ БЫКУЕТ ПРИ ПОЛИЦИИ. Ч. 2

1:02:24

ЗАКРЫЛИ И ОПЕЧАТАЛИ МАГАЗИН! ИЗЪЯЛИ АЛКОГОЛЬ НА 1.500.000 руб. НЕИЗВЕСТНЫЙ БЫКУЕТ ПРИ ПОЛИЦИИ. Ч. 2

Просмотров 992 тыс.

ЭТО - БАТЯ ВСЕХ ГОРОХОВ В PLANTS VS ZOMBIES!

00:47

ЭТО - БАТЯ ВСЕХ ГОРОХОВ В PLANTS VS ZOMBIES!

Просмотров 305 тыс.

Toys and Joys 1929 Ford Stake Bed Truck Part 5

20:59

Toys and Joys 1929 Ford Stake Bed Truck Part 5

Просмотров 6 тыс.

Wood Toy Truck Construction - Mighty Mack

14:41

Wood Toy Truck Construction - Mighty Mack

Просмотров 25 тыс.

Toys and Joys 1929 Ford Stake bed Truck Part 4

25:06

Toys and Joys 1929 Ford Stake bed Truck Part 4

Просмотров 7 тыс.

Making a Toy Tractor

20:05

Making a Toy Tractor

Просмотров 12 тыс.

Making Toy Wheels 1929 Ford Stake Bed Truck Part 7

34:11

Making Toy Wheels 1929 Ford Stake Bed Truck Part 7

Просмотров 18 тыс.

1929 Ford Stake Bed Truck Model

5:56

1929 Ford Stake Bed Truck Model

Просмотров 456 тыс.

Tips for making wooden toys

7:27

Tips for making wooden toys

Просмотров 65 тыс.

Toys and joys 1929 Ford Stake Bed Truck Part 3

22:41

Toys and joys 1929 Ford Stake Bed Truck Part 3

Просмотров 7 тыс.

Making a Simple Lidded Box

19:22

Making a Simple Lidded Box

Просмотров 7 тыс.

Toys and Joys 1929 Ford Stake Bed Truck Part 6

24:00

Toys and Joys 1929 Ford Stake Bed Truck Part 6

Просмотров 6 тыс.

Я тоже так могу

00:12

Я тоже так могу

Просмотров 897 тыс.