Hello Letomas.. i have a question about module TM3DM8R.. when i update the firmware of the plc, the module losed the firmware, how i can upload the firmware again? to the module.. sorry for my bad english
Hi there! I have never changed any firmware in any of the tm3 modules but below you can find the procedure: product-help.schneider-electric.com/Machine%20Expert/V1.1/en/m262prg/m262prg/M262_-_Updating_Controller_Firmware/M262_-_Updating_Controller_Firmware-4.htm#:~:text=Insert%20an%20empty%20SD%20card%20into%20the%20PC.&text=Create%20the%20folder%20path%20%2Fsys,cmd.&text=Create%20the%20folder%20path%20%2Fusr,files%20to%20the%20TM3fwupdate%20folder. Unfortunately the tm3dm8r is not include in there. Check if the m221 recognize the module also check the leds for a fault in the module
first all I will say good job sir, my question I have up grade the firmware M22. mfw Hardware ID is Green tick, Exec Version Number Yellow Tick, Controller State Green Tick after update I go to commissioning selecting M221 USB go online still I cant upload or Down load the programs to the Hardware or to my computer
Hi there! I recommend you to update the firmware of the M221 using a sd card just in case and check the txt with the result, please follow the next video: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-LdT7b8kRMQs.html&feature=shareb Try also to check the download of the program using the sd card: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-3p89GN5vi8Y.html&feature=shareb If this does not work check the led status of the m221.
Hi Jonathan, it could be that the driver were not installed during the installation of the software then i recommend you to perform another installation using admin rights. Another problem could be the cable that is not for data and it could only for charging so try with another cables.
If you have the project then you will need to inactive the project and application protection but in my experience i recommend you to have it so you can protect your IP (intellectual property)
Hi Waheed! If you forgot the uploading password (computer to plc) then i recommend you to download the program to the m221 again because as you mentioned you got the downloading password so i understand that you have the original program and modify the upload password (reading project). You can try to use a sd card with the “upload” syntax to retrieve the smbk project (please read the programming manual for the complete syntax) then you can try to read the file in the machine expert basic , if there is a problem using a sd card then you may receive that due to the password protection you are not able to use the sd card but you can try it.