Replacing Transmission Cooler Lines 89-02 Cummins | Parts Bin EP 18 | Power Driven Diesel

Подписаться 132 тыс.

Просмотров 60 тыс.

50% 1

In episode 18 of the Parts Bin, Dustin shows you how to install a Power Driven Diesel transmission cooler line replacement kit for your 1989 to 2002 Dodge Ram Cummins truck equipped with an automatic transmission. The factory hard lines develop leaks over time as these trucks acquire more and more mileage, this kit is a simple and cost effective solution. Note, the front air to oil cooler portion of the early 1st gen Cummins 89 thru 93 is slightly different than depicted in this video that was filmed on a 94 second gen. The 1st gen variant of the kit comes with a little extra line to accommodate the factory cooler setup on 89-93 model years.
Get low prices on transmission cooler line kits here: powerdrivendie...
Power Driven Diesel is a specialty performance shop engaged in the engineering and development of high performance turbo diesel technologies.
1 435 962 9555
powerdrivendie...
/ powerdrivendiesel

Опубликовано:

14 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 96

@daveapplequist4873 4 года назад

Just intently watched this video and all of my trucks are manual... loved it.

@TheSuprahuman 4 года назад

Power Driven Diesel, why haven't you got 1 million subscribers yet? This is by far the best channel I've found on YT in recent years. As a non American I can't tell you enough how refreshing it is to watch an auto show where the members don't dress like cast members from Pirates Of the Caribbean with fake enthusiasm, or yell and throw furniture around. Here it's passion, knowledge and innovation. Great stuff. I don't even own a diesel pick up truck, but now I want one. I'm still going through your video library (so many videos, so little time). Keep up the great work. Now back to browsing Ram for sale adds...…...Cheers

@greendodge98 4 года назад

I am so glad you guys could put this together for us.

@TimGarbat 4 года назад

Found this on your site last night. Was wondering how I had missed it all this time... it's new! I just ordered all these bits piece meal. What a PITA. Glad you guys have a kit for my next one. I actually found 1/2 compression to -an fittings to try on the air cooler, but sliding the hose over the end is easier

@pamobilebowhunter4655 2 года назад

Installed mine today and got it say that the most time consuming part was unbolting everything and taking the old lines out. Other than that it was a breeze putting it all back in. Also the blue lines look cool! Appreciate all that you guys and girls do for us diesel ⚙️ heads💪🏼

@pddofficial 2 года назад

Thanks for the review on it

@derekschmucker1609 4 года назад

It's funny watching you try not to crack up when you're telling us how to insert the fittings 😂

@derekschmucker1609 4 года назад

Seriously how many takes did that part take 😂

@whopchop42 2 года назад

This video is under rated. Big thanks for the help. Much appreciated

@pddofficial 2 года назад

Glad it helped!

@Runnerman-hr1ly 4 года назад

This is on the list to buy next!

@j.j.sgarage1457 4 года назад

Watched the whole video, don't even own that year truck😂....great stuff! 🍻

@mikestrucks 4 года назад

That a pretty nice kit 👌🏻

@markrich3271 4 года назад

Great looking kit. Ive always used aluminum tube and compression fittings mix with npt or jic /-an fittings.

@mikecollins8241 4 года назад

Definitely need this, I have already replaced my hard lines once, and it was $$$. Poor design from the factory, glad to see you guys made a better option. I've had my 1995 12v for 12 years and 200k+ miles, and I'm STILL debating if I want to keep the auto or not ;) Had it '"rebuilt" once by a local shop, nothing but problems/ leaks ever since :(

@bigdreamsonsmallacres 4 года назад

Make Dustin do more videos lol

@bigmurph1447 4 года назад

You forgot to mention about the check ball in the cooler line.

@Squivey3577 3 года назад

Couple hundred dollar parts wiped out my $6000 built transmission! Lesson learned the hard way

@thedriftmarshal6124 5 месяцев назад

Can you elaborate? Looking at putting this kit on but if it destroyed your trans then Ill go a different route.

@knjin7115 2 месяца назад

Trans check valve? I’m currently diagnosing an issue where I lost OD. Took these last two weeks off from work to do a bunch of different things to my 2002 Dodge Ram 2500 24v Cummins + 47re. One of those projects was the installation of this kit. Read a form covering the check valve connected to the original lines. Would removal of this check valve condone to my problem of no OD? ( I still enjoy this kit, stopped my leaks for sure. )

@MThomas92 3 года назад

should come with 2 red and 1 blue hose, supply and return! - ill be doing my hots red, return blue, fuel in green, coolant bypass in black. uber convenient 2006-2009 48re cooler lines do not cross the under the trans, everything is on the drivers side of the motor including both trans cooler connections, and the heat exchanger on the block (block and radiator)

@davezorn 4 года назад

Great vid - will be getting the kit soon

@Snowmonkeypablo 4 месяца назад

Just installed,had to use lock tite,,,Teflon tape made threads to large to thread up,,I like your co. Products but I've got a problem with the fittings being larger than the stock fittings on the inlets and outlet on trans,,quality control on chineese fittings,are off,,,this is why they can Crack your trans case,,mic them yourselfsthey are a hair bigger ,Great video and explanation of installing kit.

@alfrejaime 4 года назад

great video., i need that kit right now.! WHERE I CAN BUY THE KIT..?

@hophawthorne269 3 года назад

Nice video was just wondering about the check valve on a rh 47 do I need it or not

@madmodifier 4 года назад

Anyone have an opinion on removing a heat exchanger in a place with real winter? I have heard that it is more for warming the trans vs cooling it. Mine is rusty and it scares me a bit. I have had a failed line kill a trans before. These might be on my list soon.

@hankworthington3860 4 года назад

How much ATF should be added back in? I had a pinhole leak but there was still transmission fluid all underneath the truck. Plus I’m replacing the filter while I’m at it.

@hooptynation8307 4 дня назад

Is this an item that you guys still offer? I can’t find it on your store and the link in the description isn’t correct

@scalebuilder_sweden 4 года назад

Great chanel guys, do you ship international to Sweden? /Sam

@paulaubin510 7 месяцев назад

The only thing that you're missing in this whole kit is your one way check value that stops the back bleed and emptying your Torque converter

@TheBfury23 4 года назад

Where can I buy this kit? I can't find it on online.

@pddofficial 4 года назад

powerdrivendiesel.com/product/pdd-transmission-cooler-line-kit/

@wheelieking71 4 года назад

Is there a 3rd-gen kit in the works? It looks like this kit would basically cover a 3rd-gen with a couple tweaks? With 340k on the ticker, I don't have much faith in my stock lines.

@colinlawrence2186 4 года назад

Really informative what years of truck will the kit cover ? 🙋‍♂️🇬🇧

@What-ic6hp 4 года назад

Are the hoses already cut to length or do we do that under the truck ?

@What-ic6hp 4 года назад

Just bought the kit. Looking forward to the install.

@Snowmonkeypablo 5 месяцев назад

Is There a Backflow inline ???and if so were is it??thanks

@mikestrophytruck 9 месяцев назад

Where is the video on connecting this kit to the cooler I can't see the end of the lines to the cooler on a 2001 dodge ram 2500 diesel?

@dakotacabral7945 2 года назад

You said the outlet from the transmission goes to the fitting on the front of the cooler and that’s not where you have it plumbed too in the video if you follow the lines

@richg.7752 4 года назад

What do you do about deleting the anti flow back check valve?

@Snowmonkeypablo 5 месяцев назад

Is this anti flow back check valve as rich mentioned deleted ?and were is it located????

@Snowmonkeypablo 5 месяцев назад

As Rich mentioned in previous comment ,,,is check anti check valve deleted ???and were is valve located ???My kit ordered last night,,,the stock one put my 96 and my fifth wheel ,10 miles from a Malibu beach camp ground ,that was going to bring my Roo pup and I ,,peace and relaction,,,instead tow truck Madness and 48 hrs of no sleep,keep up Auesome Work PDD,thanks,,,,,,Paul

@mikeadams2677 Год назад

The only leak I've found and been fighting with so far is the quick connect fitting coming from the cooler. I bought a new one and it still leaks. 😕

@pddofficial Год назад

It takes a lot of force to get it to install properly if you haven't tried lubricating it I would do that first otherwise feel free to give our team a call.

@2cYourVideo 3 года назад

Does the heat exchanger relocation kit come with instructions? No idea where you can relocate it.

@mrredpill3121 3 года назад

Does this kit cover the 89-93 with the auxiliary cooler under the bed?

@12vshady Год назад

So does this kit completely replace 100% of factory lines ?

@pddofficial Год назад

yes

@pablomarquez4431 Год назад

Have you ever seen the coolant cooler fail? Mine looks really rusty so I'm just going to bypass it. Straight to the air cooler and back.

@pddofficial Год назад

Yes we have.

@chancevinson3923 4 года назад

I have an 07 dodge with an upgraded trans but I’m having a problem with to much pressure with my upgraded trans and stock lines and check engine comes on every time I floor it would bigger lines help to have any suggestions for that ?

@ronskancke8166 4 года назад

I didnt mark the lines where they enter the radiator. 2 lines one above the other. Which goes where?

@aw9680 2 года назад

The rh temp leads are really short. Wish they would have made them 4" longer.

@chippewa1994 4 года назад

Where was this in March lol, just kidding, I may get this kit just to replace the hard lines

@stevenbalser709 Год назад

I'm 4 hours from home and my tranny line is leaking I just watched a video I like it but how long would it take that kit to make it to Hays Kansas?

@pddofficial Год назад

Give our sales team a call we can get it next day air to you!

@Dirtyol12valve 4 года назад

where they crisscross between engine and trans under the truck i was getting leaks from everything vibrating loose. replaced with 7/16 hoses havent had a problem since.

@Dirtyol12valve 4 года назад

PowerDrivenDiesel thanks for the reply. They’ve been on the truck for a few years no issues so far. Truck is practically bone stock. I refreshed the trans at that time as well and put a aftermarket billet converter. Only problem I started having recently is slow engagement into gear after it’s been sitting for a few days. I think it’s converter drain back but could the lines have possibly caused that? Either way not a huge deal as I’m swapping to a 5speed after winter.

@celticdude4686 3 года назад

What about the drain back valve ?

@williamlock1017 2 года назад

I'm installng in my 2001 Dodge 2500 4x4 cummins a factory rebuilt 47re transmission by a company named Moveras. They say I have to bypass the transmission cooler or put a new one on they will not warrenty the transmission if not. They also say I can not flush my old cooler is this normal ?

@pddofficial 2 года назад

Not normal for us we clean them and would never bypass them 60% of the cooing for the transmission is done by the heat exchange

@bobbypate4435 4 года назад

2006 5.9 Auto lines or kit??

@zourdiesel8579 4 года назад

💪🏾

@jdstephenson2003 2 года назад

My truck is a V10 gas 2001 Model. Will this kit work on it?

@pddofficial 2 года назад

No sorry the heat exchangers are not in the same location.

@PatrickKanatzer 4 года назад

Do you carry kits for 2003 and up?

@pddofficial 4 года назад

No they are still in development

@Maximus-sm4ue Год назад

is this the same on the gas engines?

@pddofficial Год назад

They are different

@andrewhansen4179 2 года назад

Hello PDD. I am interested in your kit. I have a 1999 2500 Ram and I just had a leak in my Heat Exchanger, which I will replace. One of the coolant lines from the Heat Exchanger is a short 19 inch S shaped steel line that goes forward to a coolant junction near where the radiator hose connects to the block on the passenger side. What is this piece called? Mine is rusty and unreliable. Do you offer a hose solution to that? Connections from the Heat Exchanger to the short 19" steel line is with short rubber hoses and clamps on both ends of that short steel line. Thanks.

@shawnnewsome4778 4 года назад

Good vid but I Going to delete all that crap and make my own heat exchanger cooler lines get rid of all that factory stuff that’s in the way

@fxsrshd 4 года назад

What tools are Needed ?

@mikestrucks 4 года назад

Second from France 🤷🏻‍♂️

@nicholaslambright5516 4 месяца назад

Will this work on a v10 truck

@pddofficial 4 месяца назад

No the coolers are not in the same location.

@maxevans1954 3 года назад

What do you charge to do this for me???

@pddofficial 3 года назад

$450

@petemorris306 4 года назад

What's the point of using the heat exchanger anyway? can it be bypassed and just use the cooler at the front of the truck?

@markrich3271 4 года назад

Most compound kits its deleted. I have a 7665 over a s488 and deleted mine heat exchanger to run a oil cooler now.

@markrich3271 4 года назад

@@pddofficial I deleted my stock one but added a in line cooler in a different spot . Ive towed way over weight and have been fine.

@dixiemae5042 4 года назад

Not AISIN compatible 😥

@jeremybowden7916 3 года назад

Fuck that kit go to full send diesel and get there kit its a lifetime warranty for some bad ass Braided hoses

@dustindrake6272 4 года назад

Wilk this work on 03 47 trucks

@dustindrake6272 4 года назад

Ok looking forward to the kit might buy it to have new lines instead of oem lines

@johnevans7065 4 года назад

@@dustindrake6272 The one thing that is different is the two lines from the trans cooler to the hard lines are push lock. It takes a special tool to remove them.

@dustindrake6272 4 года назад

@@johnevans7065 ok thank you

@tony-re3qp 4 месяца назад

Do not put oil on it to push on put hose in boiling water push on like butter

@joebradley1520 Год назад

Steel lines - $100 Kit lines - $300+ Do the math

@wyattsklee6769 27 дней назад

8:31 “easy enough” that’s a fucking lie. I’m a 225lb man and it takes a strength as a gorilla to connect these lines to those fittings.

@pddofficial 26 дней назад

A little heat and/or lube and they are very manageable!!

@uhmlmfao 4 года назад

Or delete that useless heat exchanger, considering majority of the time by the time it’s failing and you find out, your trans is already full of coolant. Run auxiliary cooler. That’s just what I always do.

@richg.7752 4 года назад

The issue with that is it's a heat exchanger not just a cooler. In cold climate it uses hot engine coolant to help warm up the trans to operating temp

@richg.7752 4 года назад

@@uhmlmfao trans fluid does not run though the radiator. It has the air to air cooler and the heat exchanger just like what was shown in the video. I have seen people remove the exchanger and overheat transmissions because the factory air cooler is small and cant handle the job by itself. Also if having it was pointless I doubt dodge would have spent millions of dollars to produce and install them.

@richg.7752 4 года назад

@@uhmlmfao maybe the fluid runs through the radiator on a 6.7 like yours? I'm not sure because I don't have experience with those so you might be thinking of that but on the 12 valve like in the video it 100% does not

@dixiemae5042 4 года назад

First