Travel In Silence?! Building The Hyte Revolt 3 | Noctua Air Cooled Gaming / Editing PC Build

Подписаться 174 тыс.

Просмотров 83 тыс.

50% 1

Introducing my latest build in the HYTE Revolt 3!
For this build I really wanted to aim for a minimalist, yet very capable silent editing pc, with light gaming in mind too! Needless to say, the combination of the Revolt 3's incredible airflow combined with the select Noctua components kept this build silent, with plenty of moving air to prevent overheating under heavy load. Sure, I could’ve easily added an AIO, but having seen this done extensively with the Revolt 3, I decided to try something a little different with the air cooling setup.
Near the end of the build sequence you will notice that I had the mic practically touching the PC to get an audio file of the sound. It was almost impossible to hear it! Hats off as always to the guys at Noctua for producing such incredibly quiet fans!
With this being my first build in the Revolt 3, you bet that I'm excited about the idea of custom loop water cooling this later down the lines too!
Main parts included:
(USA Amazon)
Case - HYTE Revolt 3 - amzn.to/3Asdvl8
GPU - MSI RTX 3070 ti Gaming Trio OC - amzn.to/3uqh07v
CPU - AMD Ryzen 5 5600X - amzn.to/3yFBYSC
Motherboard - ASUS ROG STRIX X570-i - amzn.to/3nCO34H
RAM - Kingston Fury 32GB 3600mhz - amzn.to/3adtIQa
CPU Cooler - NH-L9a AM4 - amzn.to/3uoYfS5
Fans - Noctua NF-A14 PWM - amzn.to/3yidygr
PSU - HYTE Revolt 3 built in 700w (iBuypower) -
Main parts included:
(UK Amazon)
Case - HYTE Revolt 3 - amzn.to/3bUIoV7
GPU - MSI RTX 3070 ti Gaming Trio OC - amzn.to/3yJIfMQ
CPU - AMD Ryzen 5 5600X - amzn.to/3yI3C1j
Motherboard - ASUS ROG STRIX X570-i - amzn.to/3yfyaWB
RAM - Kingston Fury 32GB 3600mhz - amzn.to/3RaXZQp
CPU Cooler - NH-L9a AM4 - amzn.to/3bL5BJ7
Fans - Noctua NF-A14 PWM - amzn.to/3IhujwX
PSU - HYTE Revolt 3 built in 700w (iBuypower)
I'd just like to say a huge thank you to HYTE for sponsoring this build. A thoroughly enjoyable SFF build with great potential, I also hope the different approach is well received!
Link to the HYTE REVOLT 3:
hyte.com/store/revolt-3/
Link to the HYTE Eclipse HG10 headset featured:
hyte.com/store/hg10/
Please like and subscribe if you want to see more content like this, also follow the link below to my Instagram where you will find the photoshoot pictures and lots more like-minded content :D
Find me on Instagram:
/ mr_matt_lee

Развлечения

Опубликовано:

5 июн 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 102

@hytebrand 2 года назад

Such a relaxing build video. Loved it 💛

@Mr_Matt_Lee 2 года назад

Thank you 💛 So pleased you enjoyed it 😁 Really looking forward to seeing more from HYTE.

@ahmadsultankadir1 Год назад

@@Mr_Matt_Lee Did put high to volume sound in 3:56 i try listen how much sounds in there rig then 4:06 scary me too loud music 🙃

@ELWBB Год назад

FINALLY someone that build this case without an AIO. Thanks for making this build.

@pehenry Год назад

Dude. I totally appreciate the no nonsense build build and video. No crappy intro. No yapping just to yap. Well done.

@QuB3 2 года назад

Damn, this channel is gonna grow for sure! Keep it up Matt :)

@jasonr4630 2 года назад

Love the video, great production and music selection, I was already planning the build and you used most of the parts I was already planning on buying. Interestingly enough I was planning on a SFF water cooled but after seeing the acoustics portion of your build I changed my mind and saved a bunch of money as sound levels were a primary focus in my build. Switched the Noctua 140s and the Noctua NF-A14 PWM out for the Chromax.black versions just for my aesthetics. Just wanted to say thank you for the great video, watched it like 4 times getting all pumped for my new build, mostly because I liked the music :D

@boydolson5350 2 года назад

Okay future tip for video production. Dont have a sound test where viewers need to turn up their sound to hear and then blast some loud music at the end of it.

@datmaafahka2641 Год назад

Shut up

@datmaafahka2641 Год назад

@@boydolson5350 wahhh 😭 I’m getting mad over a comment. Al I just told you is to shut up go get some help baby 🤣 sounds like u have anger issue buddy

@waldokitty3533 Год назад

Classic troll. Made me laugh actually

@boydolson5350 Год назад

@@waldokitty3533 4:02 tell me thats not annoying

@waldokitty3533 Год назад

@@boydolson5350 oh it's something. If I had a kid sleeping and it was on speaker, I'd be annoyed rather than amused. But it was so loud after I cranked the volume to hear the fan, I can only imagine it was an intentional troll after having been a chill video the whole time. I'm sure most people hate the guy for it, and for understandable reason; I just thought it was funny.

@badoidoy8306 2 года назад

These videos are sick! Awesome job man

@dickaldor 11 месяцев назад

Ah smooth transitions on the video, great work! Looking into an mITX case to put my computer in (getting new mb, cpu and ram) and this is one of the cases I´m considering. Thanks for making this video!

@andrewcool. 2 года назад

Powerful video, buddy 🔥🔥🔥 Very atmospheric 🖤🖤🖤

@Mr_Matt_Lee 2 года назад

Thanks buddy, so pleased you enjoyed it 😁🤜🤛

@tobydude7462 2 года назад

Perfection, I'm getting this case

@tytyguy1able Год назад

I always find the cool cases after I finish a build

@shahriartushar9015 2 года назад

Awesome build ☺️ love it 😍🥰

@Aeterna_Soul Год назад

Amazing. Thank you!

@junglejim5678 Год назад

You should call this build, "Leroy Brown", because it is Badass!!

@psx1986 10 месяцев назад

Bad ass build and music, you just inspired me to build a mini itx with a ryzen 9 5900x & 4070ti 😅

@bloodofthefayth 8 месяцев назад

props for noctua, would look great with one of the noctua partner cards

@markdavenportjr5129 Год назад

Very cool I'm gonna be upgrading to a 12600k soon and upgrading from stock ibuypower parts to this case and power supply cant wait to do that since it will be super fun. :)

@thevegastan 2 месяца назад

SUBBED IMMEDIATELY AS THIS WAS THE BUILD I'M TARGETTING TO BOOK BY END OF THE YEAR!!

@josestechcorner 3 месяца назад

I have this case I just noticed that you could have popped off the front panel instead of unscrewing it, unless you had a pre production model. Love the build, Matt. I managed to squeeze the 7800XT Nitro + Sapphire card in mine.

@jibinbaby5030 Год назад

You're the content creator ⚡

@Finlandiamall 2 года назад

nice work.

@etmargallo Год назад

pretty nice, case, didnt know it had the hideaway handle and pull out for headphones, thats cool

@ArdyneusTheGod Год назад

I built my first PC with this case in August. I used the Noctua NH-C14s for the CPU cooler. Probably one of the biggest coolers you can fit in the HYTE Revolt 3. It's doing great so far. Anyways, this video is awesome.

@SomeoneElseInTheComments Год назад

How did you fit it? I'm currently building mine with that exact setup and if I orient the heat pipe end toward the GPU, the radiator sticks out of the case. If I orient the heat pipes away from the GPU, the radiator sticks out to where my GPU won't fit. I haven't tried either of the other directions as I'm pretty sure those directions won't fit either.

@ArdyneusTheGod Год назад

@@SomeoneElseInTheComments You can rotate the heatpipes towards or away from the ram. I recommend the heatpipes facing the RAM. This is because the cooler is not centered, so other orientations will cause size problems. I didn’t mention that I placed the fan on top, because the total height of the cooler is exactly the max height for the HYTE Revolt 3. Based on your comment, it seems you may be using a Intel cpu, which has the ability to be mounted in all four 90° directions. AMD mounting only allows two orientations, which are 180° of each other. If you still don’t understand, I recommend watching my PC build video on my channel. Just make sure to mount the NH-C14s in the opposite way that’s shown in the video. I later realized it was just slightly too wide for the back panel to close fully.

@Noodlepunk Год назад

Do you feel it would be a good travel pc? I want to do some Lan parties I was looking at this one or the Phantek Air 2.

@ArdyneusTheGod Год назад

@@Noodlepunk Yeah, I think the HYTE Revolt 3 would be great for travel. That’s what it was meant to do. Since it has a handle and can support more than the Phanteks evolv shift 2 air, It’s a great option.

@victorc1462 10 месяцев назад

great build, but I wish we had more passive cases. Right now we seem to only have monsterlabo "the first" it is also a vertical case but has no moving parts so zero maintenance and noise, and the temps are the same as this case.

@ChaoticWrath Год назад

You have me strongly considering switching out my AIO for a dramatically improved venting setup...

@tonycastellanos5907 Год назад

Great video!! I was wondering, would it make sense to put a very small fan on top to use as exhaust??

@user-vn4ik2ny2u Год назад

cool! I want it >.

@hafidvloggs Год назад

goooood

@MatthewPolack Год назад

Thanks for the video.. Great job.. looking for a compact audio production/gigging/editing portable PC. This looks like it could be a great option. Thanks!

@googleguy8188 Год назад

Great video but where is the exhaust? Is it don't really need it? How it works 😅

@voidenterthehighlights Год назад

Just hours before watching this video, I ordered pretty much the same components lol. Would you recommend flipping the powersupply to exhaust? I intend to place the PC horizontally

@Thertra70 11 месяцев назад

Fan were they all blowing out nothing pulling in? Just curious on the directional because those seemed like good thermals

@dv2045 Год назад

the psu shroud is removable? a few centimeters can be gained to plce a vertical flat reservoir

@shalami2 Год назад

why did you opt for the L9a when the case can fit a larger cooler?

@CJ-vq9ro Год назад

How did you get those cooling numbers? I built same pc and i'm getting 96c on my processor. I even cleaned and reapplied my thermal paste thinking it was possibly that, but still running hot. And the fans are running loud.

@dagreekratking4694 Год назад

anyone figure out how to slam in 2 top exhaust fans? Havent done it but a 80mm overlaps the other 80mm fan spot so does 70mm work or what works for 2 up top?

@Inmysightstarget Год назад

where did you get that large mouse pad for your table it huge love to get one

@starrystarry9027 2 года назад

Where can I buy the black pad that covers the desk?

@187RL 2 года назад

Hi, was it rlly only 69 and 65 degrees C under full load? If that’s true ima switch to this case with aircooling.

@josephlim3869 Год назад

Wondering with this same case and cooling setup, will it work for Ryzen 5800x ? Have you tried it ?

@MauroBallG Год назад

Hello, amazing video production and great build showcase, congrats. Quick question, I'm about do a build on this case and all the other research I've done points me toward radiator liquid coolers instead of air like the Noctua you use here, so I'm a little concerned about it and I wanted to ask your opinion on it. Thank you!

@Dino-vl3lu 8 месяцев назад

El aire es mejor que el liquido , el liquido se evapora con el tiempo , las liquidas son recomendadas para cpu super potentes

@sinankaytaran842 Год назад

hello, good luck. It was successful. I want to ask you something. I bought the same case. My ryzen 5 5600 processor. Is the noctua cooling you use used in the 5600? can i catch the same heat values?

@dagreekratking4694 Год назад

using same but 2 fan 3060ti and a 5800x same cooler too just turned up to 90%

@Ecko3351 Месяц назад

Are those 2 140mm fans enough for this build? I have the same fans with a similar cpu coolers.

@AgentDenton2000 Год назад

Крутый👊

@ExiledYVM95 Год назад

wait, you didn't mention what what storage brand you used for this build.

@milanbazelides 9 месяцев назад

2 intake fans vs CPU cooller? How are temperatures?

@jonnyfontane3607 8 месяцев назад

Whats better for this case, air or water cooled CPU?

@blue9120 8 месяцев назад

I want a case like this only thing about it none of my parts would fit

@Turtlpeach2326 6 месяцев назад

Wait so what adapters do i need

@xsv-007 9 месяцев назад

savage

@harryasilo8160 Год назад

did anyone try using noctua c14s in this case?, just wondering if doable

@lizard5109 Год назад

according to reddit it just fits and works

@axelrivas2914 10 месяцев назад

Can you use a Micro ATX motherboard in this case ?

@freudia 10 месяцев назад

Nope, m-ITX only.

@troymcfarland5767 Год назад

both of the pwm fans are intake right?

@pineapplej7310 Год назад

Yes you can see the side with no fan hub cage so it means they're pulling air into the case

@googleguy8188 Год назад

@@pineapplej7310but where is the exhaust? Is it really don't need it?

@pineapplej7310 Год назад

@@googleguy8188 not really, the case has plenty of space to exhaust air, and positive pressure is king!

@lucamorandell9977 2 года назад

Is in the Case Space for a hdd

@courtlandbrugger6770 2 года назад

Yes. It's right beside the power supply. You can fit a 3.5" hdd and there's also space somewhere else for 2 2.5" ssds or hdds.

@ohsnation1314 2 года назад

Hey question would you do a custom build?

@Mr_Matt_Lee 2 года назад

Hey there! Yes of course, I’ve done plenty of custom builds 😁

@darkvirus0776 2 года назад

@@Mr_Matt_Lee i want this build but with the noctua gpu as well for even more silence

@MrPancasona Год назад

👍👍👍😍😍😍🙏🙏🙏

@tay7125 2 года назад

What kind of cpu cooler is that?

@Mr_Matt_Lee 2 года назад

Noctua NH-U12A chromax.black with NF-A12x25 PWM fans 😊

@troymcfarland5767 Год назад

@@Mr_Matt_Lee is it not the nh-l9?

@Mr_Matt_Lee Год назад

@@troymcfarland5767 yes, yes it is! It’s the NH-L9A 😶 I totally got my previous comment response confused with a different video.

@ahmadsultankadir1 Год назад

Better put on with Arctic Liquid Freezer II 280 with this rig

@Wolfreiser Год назад

I don’t think it would fit

@ahmadsultankadir1 Год назад

@@Wolfreiser Is work, i did check information and so.

@Azraenore Год назад

Me: Mom, I want a Xbox Mom: No son, we have a Xbox at home The Xbox at home:

@luongphuoc4592 2 года назад

Aio cooler will be better

@Ulieq 2 года назад

na, so much airflow no reason for aio

@sladesurfer 2 года назад

I think AIO marketing from the RU-vidrs got you brainwashed

@tobydude7462 2 года назад

@@sladesurfer Lol, word

@luongphuoc4592 2 года назад

@@sladesurfer i built fist PC when IntelGen4 :) , AIO is suck? Or something?

@DemiLovatosSpoon 2 года назад

Idk watch some videos with AIO CPU was 70+ The rad be taking up so much space causing air flow to be confined

@thomasdejonge3461 3 месяца назад

Noctua makes such ugly stuff, but it works great :)