Travelling HARSH AUSTRALIAN OUTBACK doesn’t go to plan!! 

Starter/solenoid by sounds of it. Not too bad a job on a hoist, bit fiddly.

Check your earth leads,between battery and starter, the chassis earth strap and engine block to chassis strap, I found it happened on my 4x4 and once on my work truck, it’s worth a look while waiting for help

Hated the powered section at Clairview, nothing but a crowded dust bowl near the Hyway, hubby washed his hair and couldn't get it to stay down for a week so we stay at The brandy bottle up the road now

You guys are so cool , at least on camera you keep cool despite the challenges every now and again and I love your story telling. Always refreshing to find your new blog waiting for us. Had a giggle at Erin’s ‘Kodak’ moment and you losing you thoughts for a moment 😮 Priceless …. Try hitting the starter motor in moments like that … sound like it could be sticking … needs a good whack when you do…

What a amazing cause we also are very passionate and donate to many causes we will Be there if we can get our dates to align if don’t defiantly be donating

Battery failure, possible crankshaft position sensor or is there a humming noise with key on? Turbo actuator?

17:00 pour a cup pf boiling water over the terminals when they're loose, let dry, re-tighten and cover in petroleum jelly (Vaseline)

Thats a bung starter motor... easy peazy...

I would normally just give the starter motor a whack with a big cob of corn wrapped in Alfoil. Works nearly every time. 🌽 🛠

Great vid.. keep em coming

Great video. Hughenden has the F.J. Holden cafe. It's worth a look in as there's so much memorabilia.

Our fridge door did the same on both freezer and fridge. Dometic replaced the plastic clip frames (all warrant) and the dealer used sikaflex to hold the black fascia to the fridge. No probs since, but we will see what the Gibb does next winter 🤔

I think you might have converted me to a fridge drawer for my next fit out 👍 Not the first one of those Dometic fridge doors I’ve seen come off on RU-vid Others have just urethaned them back on

Hey Alex I have a px3 ranger and my dual battery charger stopped working, it turned out to be the earth to the body on the firewall I think it was from the battery might be worth undoing that and clean the connection 😊

G'day, there's no link to your merch.

Our fridge panel door also came off (Theftford) but we gaffa taped it and no problems. Even did the Birdsville and still holding.

Hi - we had the same problem with our freezer door. Hubby predrilled the bottom shroud through under the freezer door and pop riveted it. Not going anywhere now.

Hi guys. We are in the process of planning to take off full time travelling. Can I ask how you go with the dogs? We have 2 and have specifically added AC to the new van for them in the hope to do what you did so you could do the gorge.

Have you been in water like rivers extra that would have covered the starter motor. Because that will definitely affect the power supply that would stop the brush’s from giving you a good connection.

We have our tickets to camp for a cure, ready to party and meet the utubers. The Tshirt l had ordered arrived and very happy with it, such soft fabric,love it❤. Thanks for sharing video

Sika flex the pretty piece back on and the oven arrived while we are still 400k from home just got another van so will try and catch up with you lot sometime

A mate of mine had the same problem with his fridge like yours and he just siliconed it back on with no problems since

Lovely Ep Guys Bugger on your 4wd, Porcupine gorge is a cracking spot.

awesome video Alex, great cause next year best of luck for that, there is a simple problem with the Ranger, just got to find it👌

Had the same problem, I took the freezer door off, got some nice black self tapping screws drilled small holes, and placed screws in put door back on mine was out of warranty good luck on your travels

Sounds like dirty solenoid contacts on the starter motor

Starter motor faulty by the sound of it

We did porcupine gorge on a trip last year, and thought we were dying getting back out again, up all those steps. We felt incredibly unfit. We did then test positive for covid the following day, so blamed it on that…but maybe it wasn’t just that.

Hi Alex, loved the content as per usual... Also loved your tool bag/roll. i have looked on Kings site and cannot see it under tool bags.. do you know if it is still available?

Yip had our freezer door panel fall out. I found that the top trim had lags to stop this from happening so I swapped both trims around. So far all good. Short of this you can rivet to stop it falling out.

👍👍

Good on ya guys ❤ Great cause..