Тёмный

Troubleshooting my Jiffy Model 31 Ice Auger...EASY fix!!! 

Salty McFogg
Подписаться 598
Просмотров 13 тыс.
50% 1

Not too good with fixing things but I took the time to work on my Ice auger because it was shutting off after every hole I would drill. After a few very simple changes I got it running like new!
Music available free here: www.soundcloud.com/Ikson
Gear used in video (sorry I can't provide Links but you can find them all on Amazon):
Carb Diaphram repair kit: www.amazon.com...
Carb Spray: GUNK small engine Carb and Choke Cleaner
Spark Plug: First Fire FF-10 RJ17LM
Torque Wrench: Husky Torque Wrench key set
Premix Fuel: TruFuel 40:1 mix for 2 cycle engines 32 Oz. can
Seafoam: Seafoam motor treatment 16 oz can
Special thanks to the guys from IceShanty:
www.iceshanty.com

Опубликовано:

 

3 окт 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 19   
@chdecoys
@chdecoys 4 года назад
Kitchen table carb work!!! Ah to be single again
@A.C._Taylor
@A.C._Taylor 3 года назад
Just bought a barely used one. It’s doing the exact same thing. Thank you for sharing your video. It’s a real help for me. Tight lines sir!
@SaltyMcFogg
@SaltyMcFogg 2 года назад
Happy to help!!
@carll1962
@carll1962 2 года назад
Nice job. Was looking for the carb settings.
@chrisscott541
@chrisscott541 3 года назад
that was awesome man thanks
@justinw9631
@justinw9631 2 года назад
Just picked up a used one last week and doing pretty much the same as what yours was doing. I have to primer it to keep her from dying lol... choke lever is also quite loose but will see what a good carb clean does. Any chance you have a link for the carb kit you ordered? How has the 40:1 premix worked out for you?
@SaltyMcFogg
@SaltyMcFogg 2 года назад
Hey sorry late to the party here. I just added the link to the carb kit but if you search Jiffy Model (whatever your model #) diaphragm kit it should pop up. It's like 10$, hopefully you can get it working! Trufuel is working good, I had it running this year fine as well.
@mikel5992
@mikel5992 3 года назад
my wife was horrified that you were doing that in the kitchen, lmao. I though it was legendary
@SaltyMcFogg
@SaltyMcFogg 3 года назад
Not a lot of workspace where I am, gotta make do!😂
@AndyGenova-jr9ol
@AndyGenova-jr9ol 3 часа назад
What about bad crank sealse thats what it takes when everything else failes lets address the elephant in the room runs purfect now!!!!!!!!!
@aaronfrechette5646
@aaronfrechette5646 2 года назад
hey just wonder what carb kit you used??
@allenupnorth2191
@allenupnorth2191 3 года назад
Can u fix mines I’m in upstate ny
@codyrivenburgh2926
@codyrivenburgh2926 3 года назад
Where in upstate ny u live...im upstate and can fix it for ya
@allenupnorth2191
@allenupnorth2191 3 года назад
@@codyrivenburgh2926 Chateaugay NY
@Enchanted_Adventures505
@Enchanted_Adventures505 3 года назад
👌
@jakeowens1770
@jakeowens1770 2 года назад
Ouch my ears , crank the volume up
@SaltyMcFogg
@SaltyMcFogg 2 года назад
Sorry lol, audio balance is tough
@matthewgrigg576
@matthewgrigg576 2 года назад
Don’t use that cheap plug use a ngk
Далее
Jiffy Model 30 Ice Auger Carb Repair
10:39
Просмотров 7 тыс.
How Many Twins Can You Spot?
00:17
Просмотров 19 млн
Easy DIY Smitty Sled Anyone Can Build In An Afternoon
14:05
I Drilled Over 200 Holes! Ion Alpha Auger Review.
16:13
NUTR: Ultrasonic Cutter USW-334
20:33
Просмотров 1,5 млн
Why Are Guillotine Blades Angled? (tested)
18:40
Просмотров 583 тыс.
Free jiffy model 30 ice auger
31:51
Просмотров 2,1 тыс.