TrP INDEV SWITCHES GUIDE (WATCH ALL THE WAY THROUGH) 

Glad it helped

@@TSgotstolengoddamm great vid wirtualized

у трамвая для этого есть тумблер) как у мегаполиса. И тут есть небольшая путаница. под током стрелка принимает иное положение, а на выбеге остаётся в исходном - направо.

Isn't turning the power off completly more complex then just the control circuit?

@@avgeek_d00d86 I meant I stop accelerating, sorry my comment didn’t make that clear I‘m not great at writing lol

@@BrokenIET no problem

yes why?

How realistic would you say the game is?

@@The_Untitled 9 out of 10. Real ZiU-9 (ZiU-682) almost always drive in poor condition :))) In the game, they are in perfect, factory condition. in reality, the state of the contact network (wires) is always different. In some places you can drive swich even 40 km/h, and somewhere it is dangerous even at 5 km/h

No problem

Worn out pole head insert

You need to change pole head inserts if it has for example under 50%

@@Pomeranc470 Oh? Thank you so much!

the amount of contents you have in the toolbox are not useless, there are head inserts that you can use to replace the heads so your poles dont fall off of electrification.

Have you checked the condition of the pole head inserts

@@SNBRdude what about them

You have to enable the pole with the pole head wrench, just press leftclick on the poles with it

@@yesnukesshouldbelegalised The pole heads are the chances of your poles going off of electrification, there are new head inserts in the toolbox that you can add to the poles to decrease the chances of a random pole failure.

hold w

You had to accelerate, now you don't need to. To go right, disable control circuit (or how it is called) by pressing it or pressing e.

m

F

use the numbers on ur keyboard so like if u press one it it will open ur first door press 2 and it will open ur second door

1,2,3,4,5 and 0 opens all door

either rewire or restart

oh so if he’s was a bacon you would assume hes a noob or a bad player?

@@josislost No, but most bacon hairs are dumb and follow you around.

check their discord, you can find a link at a tutorial vid that they made

@@charles_thesecondmanthing thanks

yea but most of the time the poles actually switch to both sides so better to disable the circuit

what you just said is complete misinformation

​@@torchedegg it real the dev make a update about this he said now if you have route navigation enabled, lines of route you set up will appear in between wires with your route number that will direct you where to turn and on which side of the switch you should go

@@_jojo_joestar_ it real the dev make a update about this he said now if you have route navigation enabled, lines of route you set up will appear in between wires with your route number that will direct you where to turn and on which side of the switch you should go

@@nah3507 you dont understand, it shows where you should go, not switching for you, or else it would be unrealistic