Truck Bed Camper Build | Part 4 | Fabrication Complete!!

Подписаться 35 тыс.

Просмотров 13 тыс.

50% 1

Part 4 of my truck bed camper build! Finishing up the fabrication so it can be sent to powder coat!
First video outlining the build!
• I’m Building A Truck B...
Truck Bed Camper Build | Part 1 | Main Structure
• Truck Bed Camper Build...
Truck Bed Camper Build | Part 2 | Wall Panels & Roof
• Truck Bed Camper Build...
Truck Bed Camper Build | Part 3 | DIY Roof Lift System
• Truck Bed Camper Build...
Truck Bed Camper Build | Part 3.5 | Fixing My Roof Lift System!
• Truck Bed Camper Build...
Merch!
www.adv4x4.us/...
Instagram!
www.instagram....
Need some good garage work wear? Check out 1620 USA!
Use code “ADV4X4” for 10% off your order!
www.avantlink.... inch bar clamp
amzn.to/3Tkc3df
Who cuts and bends my parts
sendcutsend.co...
Wander With Kate's Video on gas strut selection!
• Raising the Roof: A Gu...
Eurovision Windows (Artic Tern) I did 300mm x 500mm
aussietravelle...
Alucab Spare tire carrier
ok4wd.com/spar...
GP Factor Fold down Table
ok4wd.com/cano...
Door Seal
amzn.to/4csXI4K
Roof Lid Seal
amzn.to/4dqFBOc
Piano Hinges
amzn.to/3R5qbpd
Lid Latch
amzn.to/3WQfB7L
Side hatch door compression latches
amzn.to/4dDcyqw
Stainless Button head bolts
amzn.to/3X7Jdz... Struts
Bed track threaded nuts
amzn.to/3X8fsht
Rivnuts
amzn.to/3VqRLji
Rivnut Tool
amzn.to/4bF1qZt
Gas struts
www.liftsuppor...
Hatch door gas struts
amzn.to/3YNSRYB
Hardware x2
www.liftsuppor...
Diablo Steel Demon Blade
amzn.to/453qR4x
Milwaukee Cutoff tool
amzn.to/4dlnYPI
Roof Fan
www.etrailer.c...
Nylon Straps
amzn.to/3JOLasz
Carabiners
amzn.to/3JO1oSH
1/4 - 20 Eyelets
amzn.to/3wmzSsp
Laser Cutting Services
sendcutsend.com
Milwaukee Rivet Gun
amzn.to/4cDSTa7
Rivets - 3/16" | 1/4" Grip
amzn.to/3TLoQ7A
Rivets - 3/16" | 1/2" Grip
amzn.to/3vqL1Io
72" Bar Clamp
amzn.to/49khWvV
Band saw Blade
amzn.to/3V0PUlw
Welding Helmet
amzn.to/3uWO5eW
Spool Gun Wire
amzn.to/49U1lQn
Wire brushes
amzn.to/3VkgQx5
Fireball Tool Mega Square
fireballtool.c...
Welder
www.everlastge...
Spool Gun
www.everlastge...
Welding Wire .035 - ER5356
amzn.to/49egAmN
#diy #camper #aluminum #overland #welding

Опубликовано:

28 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 76

@Adv4x4 Месяц назад

Thanks so much for watching guys! Don’t forget to like and subscribe! Would love to hear your feedback/ideas so far. As always I linked everything in the description! (If I missed something let me know) Thank you!

@mike123abc 9 дней назад

The front of your camper looks like a great place to put a lightbar! I really like the design of the camper, I cannot wait to see the final reasult.

@Shaun614 13 дней назад

Amazing craftsmanship! Looks like a solid build, and really light.

@jaystewart9947 Месяц назад

Nice work! Camper is coming along nicely and great attention to detail as always. Thanks for sharing Sir

@Adv4x4 Месяц назад

Thanks Jay! I’m excited to see how far it’s come myself. Almost on the truck now 👍🏼

@MaxGreer-m8f Месяц назад

This is awesome! I cannot wait to see the final product. I reference your videos a lot when I am building my own things. Keep up the awesome work Amigo!

@Adv4x4 Месяц назад

Appreciate it man!! Glad to hear you are building stuff! That’s what it’s all about!

@chipandrews2892 Месяц назад

Looking GREAT!!!! Damn sure like your Craftsmanship, I can't wait to see the next update!

@Adv4x4 Месяц назад

Thanks man! More regular updates on my instagram stories as I go! instagram.com/adv.4x4?igsh=MXJwMm9icjg4cDkwYg%3D%3D&

@Isaacmantx Месяц назад

Great looking build

@Adv4x4 Месяц назад

Appreciate it!

@irish-simon Месяц назад

fantastic job

@Adv4x4 Месяц назад

Thank you!

@Keasbeysknight Месяц назад

Whatcha think of interior locks on those pop out side walls. Prevent hooligans from opening it from the outside? Great video! Was wondering where all my over landing tubers have been.

@Adv4x4 Месяц назад

Thankfully I don’t camp around any other people I don’t know so not a concern of mine, Primitive campsites only for us!

@mikesnifferpippets3733 Месяц назад

I like the forward thinking about being able to open the side doors from the inside. Maybe I missed it, but is the rear door able to close/open from the inside?

@Adv4x4 Месяц назад

I will cover that in a later video but yes it will have its own inside latch!

@Phoeff99 Месяц назад

Curious how you found doing the stainless welding...did you use that Blue Demon flux core wire as well as gas ( a dual shield type setup) or stainless wire with the C25? I've been tempted to do some stainless welding but haven't had the chance yet and frankly didn't want to invest money and space in a bottle of trimix. Looks great though! well done!

@Adv4x4 Месяц назад

I did not use flux core wire just stainless with C25! It has been the only thing in stainless I’ve ever welded so I’m thinking it will naturally progress as I learn it more haha

@alpinetactics Месяц назад

Dang man, this series deserves all the views! Cant wait to see the finished product!

@Adv4x4 Месяц назад

Thanks so much man!!

@DuanDao Месяц назад

Not sure if it's been said, on the brackets that are riveted down, have you thought about using panel bond as well as the rivets? might help in the long run w/ structural rigidity over the years of vibration etc.

@Adv4x4 Месяц назад

Great idea I will look into it!

@SigmaWolfOutdoors 21 день назад

I recommend fixing the three piece bed cap design...loose the stock plastic ones...seal up that truck bed ..cubbies...n front top corners have huge holes...

@jorgeribeiro4413 16 дней назад

I'm going to build one just like the one you made, for my 80s pickup

@Montana_Outdoor_Adventures Месяц назад

First.

@BadlandIndustries Месяц назад

Rear door latch looks killer! How do you work it from the inside?

@Adv4x4 Месяц назад

I will be adding another method on inside to close it!

@jorgeribeiro4413 16 дней назад

show, tks

@Keasbeysknight Месяц назад

You might consider looking at rev two of that door handle/lock and then just sell the parts unwelded or make them out of steel and weld them yourself and powder coat them. I may have missed why they were stainless. Slick job on it, did you design in alignment tabs and holes for everything to easily fit and weld?

@Adv4x4 Месяц назад

Stainless for corrosion resistance! I would not want to sell the door latches as the design is far to close to an established companies design. Not looking to rip anyone off.

@doityourselfadventures Месяц назад

Also for hoke plugs design and 3d print out of tpu if you don't own a printer grab a cheaper used one I make all kinds of things for my jeep and roof rack

@Adv4x4 Месяц назад

3D printer is definitely one of those things I’ve been meaning to dabble in just have so much other stuff going on 😂

@huybanh 24 дня назад

Do you think a 130A welder can do this job? Thanks for sharing.

@Adv4x4 20 дней назад

Not 100% sure on that!

@mauriciogonzalez6302 Месяц назад

Is the intension for this to be semi-permanent or will be on your truck full time? Or will you be taking this off at times?

@Adv4x4 Месяц назад

It will be semi permanent! Do not plan to remove

@doityourselfadventures Месяц назад

For the handle why not create something close to brass knuckles just for a grip

@Adv4x4 Месяц назад

I absolutely could! Neat thing is the handle is removable so I can always design a cooler one later!

@mauriciogonzalez6302 16 дней назад

I keep checking back for the next part of the series. Dude it been 3 weeks. No pressure 😂

@Adv4x4 16 дней назад

Editing it as fast as I can! Haha. If you keep up with my IG I post stories regularly on its progress! instagram.com/adv.4x4?igsh=MXJwMm9icjg4cDkwYg%3D%3D&

@chrisjarvis5876 24 дня назад

John, I’m impressed. Lots of thought and work and look what you have. A nice camper for your rig. Can’t wait to see the finished product after the powder coat. Keep up the good workmanship. Hope the trip to Colorado was fun.

@Bw74746 Месяц назад

Great videos!! Do you have an idea of finish cost?

@Adv4x4 Месяц назад

I will have a cost breakdown at the end!

@Voltechs Месяц назад

Bro! When are you headed to CO? I'm literally leaving CO to go on a trip out east and through VA. Was stationed out there about 6 months ago and my girl has some friends she wants to see but I've been following your stuff and would love to meet up if we can! I'm also a proud 2nd gen owner with a passion for overlanding.

@Adv4x4 Месяц назад

We went at the beginning of the month! Some of the footage was taken prior! Going to be tuning Toyotas in Roanoke VA this Sunday.

@Voltechs Месяц назад

@@Adv4x4 word. I’ll be in VA in about two weeks. If you’re around I’d love to swap rig tours if you’re down!

@azxp Месяц назад

Very Nice!

@Adv4x4 Месяц назад

Thanks!

@dirttrekking4321 Месяц назад

Amazing work, I love your attention to detail. Great work on the rear door handle fabrication.

@Adv4x4 Месяц назад

Thanks man! I try my best to be thorough on these videos. Hope it can inspire someone to build one as well!

@mikemorgan4670 Месяц назад

Great summary of the fabrication. Really amazing what you've accomplished. Bravo!

@Adv4x4 Месяц назад

Thanks Mike! It’s been a long road!

@przedszkoleizobekpiccolo6475 Месяц назад

That's awsame! Being this year in Romania/Europe finally I've decided to change my roof tent for same overlanding home as you are doing. I'm watching it as perfect guide for my work. Thanks and congratulations!

@Adv4x4 Месяц назад

Love to hear it! Best of luck!

@welderguy5140 Месяц назад

I have watched all of your videos building. I appreciate your attention to detail. Aluminum can be very temperamental, I like how you blended welding with rivets. Keep up the great work. Can’t wait to see the finished project.

@Adv4x4 Месяц назад

Thank you so much! The rivets seemed to make sense. They were easy to add and also provided me with peace of mind!

@Glenn.Cooper Месяц назад

What a fantastic build this is. Really enjoying watching the progress!!

@Adv4x4 Месяц назад

Thank you Glenn! I’ve been putting my all into this one. Want to do it right the first time!

@DaveyJordan Месяц назад

Looks so good. It's been a real joy to follow along!

@Adv4x4 Месяц назад

Thank you man!!!

@jaxithfox Месяц назад

For the tire mount on the door I recommend getting some aluminum tubing, drill out the mounting bolt holes, and weld the tube in place to essentially sleeve the bolt holes. Makes them far stronger and should help prevent premature wear on the aluminum.

@Adv4x4 Месяц назад

I considered that myself as well. Have done that on past projects. If the tire didn’t tighten up against the rest of the door I absolutely would. That being said I think it will fair just fine!

@Knight805 Месяц назад

I can’t wait to see it powdered.

@Adv4x4 Месяц назад

Check my instagram stories! instagram.com/adv.4x4/?igsh=MXJwMm9icjg4cDkwYg%3D%3D&

@joshua_patterson Месяц назад

Your skills are amazing. Can't wait to see more on this; esp the powder coat.

@Adv4x4 Месяц назад

Thanks so much man! You can get regular updates on the camper Including seeing the powdercoat on my IG! I will be working on it all week after work and posting more updates instagram.com/adv.4x4?igsh=MXJwMm9icjg4cDkwYg%3D%3D&

@Phoeff99 Месяц назад

Great to see you try the router technique for cutting out sheet sections. Glad it worked as well as it did!

@Adv4x4 Месяц назад

Yes it worked fantastic!