Trying to FIX: eBay PS4 with BLOD & Not Reading Discs 

Nice work Vince! Great video.

Vince does a REAL refurbish job on things he fixes; unlike Game Stop and other places.

After I've unplugged the mains, I always power on any electrical devices to drain the caps before opening. It's a good rule of thumb.

I personally prefer watching your longer videos. i like to see exactly how you solve it I just like you like striping things down trying to fix it not always successful and also a beginner to these things but your videos have given me confidants to have a go thanks for that and can't wait to see what you fix next

Finally a new PS4 fix 😁 I am looking forward to read " trying to fix Ps5 not booting up" 😂

If you ever needed a reason to NOT smoke, then the state of this console should be it...... Good job Vince!

Great job =D You may get that laser working by soaking the laser assembly in IPA (for like 2 hours) ! Sometimes smoke or dust does get inside the optical path!

Big props for going the extra mile in cleaning out that fan, I know how much of a pain that can be.

Thank you Vince. I always love watching your trying to fix console videos and all the trying to fix videos. Way to improve my weekend with one of your videos. Again thank you.

Hi Vince, great video. I have a tip for removing light scratches on plastic. I use brasso, the tin with the wadding, and I lightly polish the area with the wadding and it really works. If you do it on painted surfaces you have to be extra careful that you don't go through the painted surface. I've used it for the many boomboxes and tape decks I repair and they look great. Keep up the great work my friend. Kind regards. Paul.

My brothers PS4 which was a launch model held so much power it would actually start to turn on with the light and everything for about 2 - 5 seconds and then shut off. Crazy how much power them caps can hold.

hey, your getting better at the music. Even though I like the classical music this is a nice refresher to your vids. Looking forward to the next 1hr long trying to fix videos.

im actually thankful my launch model ps4 has never had any issues. nothing replaced etc. only thing ive had to really do is change the paste and clean the heatsink. i lubricate the fan everytime i open mine. sounds super quiet today (edit: its also used on a daily from watching tv, youtube or netflix to playing call of duty or gta)

Hi, I just wanted to say that you are doing an amazing job of fixing electronics. Good job! You are also keeping faulty electronics from landfill. Thank you.

so pleased i gave up smoking 8 years ago. I cleaned 2 ps4 lately and it was just dust not that horrible tar crap. I feel for you Vince.

Nice fix :) Great example of the method, that even if something initially looks unfixable, it's always worth checking, if it's just a simple problem anyway.

Just thought I'd say a great repair as always Vince. People love the PS4 videos, you should definitely do more. You'll find as you go on you'll start finding some pretty nifty tricks to repair them. Keep up the good work bud 😏

Nice can't wait to watch this. I've got a BLOD coming out soon that you might find pretty useful

When Vince at the start was taking off the power supply and was unable to I was just screaming THE WIRE MATE 🤣

I totally love watching your Videos 😁 Hello from Germany 😆✌

Awesome as usual. I like the Switch and PS4 vids, but others have been for the most part interesting as well :)

Aww man it gave me the noti a day late.well the first vid of the day starting off great. Gotta give my eyes and technology filled brain breakfast.

Hi Vince .When i clean my computers and game consoles I take them over my garage where I have a small compressor. It's much better and removing all the dust especially from hard to reach places .It's easier and quicker to use a brush everything down and blow the dust out. Its brilliant for the fans where the brush just loosens the dust and the air blows it off.I always hold or secure the fan blade to stop it spinning when blowing them out as you can break the blades if the fan changes direction suddenly when you blow it out. The dust that comes out of fan cooled power supplies is unbelievable. I find the minute you use something damp ,like a wet wipe on the fans, you have to go over every part of it multiple times to remove the sticking dust. If everything is dry and you just use a brush the air takes it straight off.A wipe down with some ipa after dust is removed and looks as good as new. I know there are warnings about static electricity caused by moving air etc but I have been doing this for thirty years and have yet to have a problem. The only times I had a problem with static is when I forgot to ground myself by touching the case etc before working on a pc. Must have built up static from walking on carpet, buggered a graphic card up, happened twenty years ago, lesson learned and have never happened again.Thanks for the video mate.

Great video and content Vince.

It’s very warm evening for a fix

Nice Video Vince. Well diagnosed. Mixture of skill and luck. I like it.

Sweet video again Vince! I just replaced the digitizer on my dads iPad Air 1 not sure if you have done one I’ll have a look! Took me a couple of hours but all works thanks for the inspiration! All the best!

Wow, very thorough job cleaning it, well done.

awsome ! :) dont shorten your vids vince !we all love it when they are 1hr plus ! lol

Blimey! Are all our Ps4 fans so dirty?! Great video Vince! 😊

Cool video man keep up the good work!!

Idk how you have so much patience with that power supply if it was me I’d put a screw driver and pull up as hard as i could after trying for 2 minutes😂

Hi Vince hope you're having a good day! :D

Vince, don't let it update. I guess it's on a low firmware. At the moment you will get more for it as is 😉. Thanks for another awesome video . Take care 😀

nice video as always

Military: Our nuke isnt registering to our computer Vince: *hold my beer*

Great Work Man! Keep Connected!

An ultrasonic bath would be handy for all the cleaning that you do. Most parts including PCBs can safely be cleaned in one, you just need to be careful about nylon and rubber parts which are best cleaned by hand and you need to be sure parts are fully dried before reassembly. It would save you a lot of work.

I'm quite thankful that my PS4 still works

Metal spudger into PSU. You are one brave man.

Good stuff. You have to lever the LSH of the PSU up first. If you lift the opposite side first it is actually quicker reseat the whole thing and start again. PS 'temporary' washer fix still working 2 years later...

Hate ebay never can trust any seller really. Well done vince and well cleaned

I legit thought for a minute you were going to fix it by cleaning the mirrors. I still feel like if it wasn’t so hard to test your fixes at that level you could find the fault.

Loved the video but would love to see a few 1hour plus videos the longer the best I love em :)

I miss the break out board days of testing and diagnosing faults.

EPIC fix! Cleaning fix that is..

I kind of jumped when the beeps happened as it was unplugged.. I was checking my computer and phone. wtf! LOL

Unfortunately the beauty of fast forward x20 means less Vince time. Maybe it's just me, but I prefer more Vince over less Vince.

Thank you for the video. Very entertaining as usual. But I hope you don't start to fastfarward throw al your videos! Even if you don't come to a conclusion or a fix. it is fun to se you disassemble a laser just because that's what you and me do. Fix what you have some time you are successful some times not. Journey is the goal. A quick version is like a good adult film but some times it is good with a full romantic comedy. Thank you once again!

Nice work Greetings to you from Egypt

Lasers in optical devices are *extremely* sensitive to static and are often unknowingly damaged by simply being disconected. In order to protect laser diodes during handling, there should be provision for 'shorting' the laser, more often than not this can be found on the ribbon cable itself as a couple of exposed copper 'pads' which can be 'bridged' by a blob of solder. This should be done BEFORE removing / unplugging any cables. Hopefully this precaution has been done with your replacement and if so remember to remove any 'short' AFTER plugging the ribbon cables back in. It goes without say to be extra carefull regardless not to touch the ends of any ribbon cables. Hopefully your replacement won't have already been damaged this way before you get it.

Thank you for the help :)

Nice video. Maybe you can try and build a pc on your own I would love that video. You are a great yotuber

You can remove the top plastic of the laser. Try cleaning the lenses from there. It's hard and requires a bit of careful prying with the cotton swab. I fixed one with similar issue just like that.

Thank you Vince

Hi Mate, Quick Question My amazon echo 1st gen I got yesterday off a family member. I couldn’t set it up with my iPhone. So I did it on my laptop. Once set up I used gave it some questions. No answer. The ring light lights up when I talk. I think it is a speaker fault. I am going to try open it today to see if anything is damaged or unplugged. Thanks Jack

Good evening everyone from wellington Somerset in the UK

I have come across a couple of PS3's that don't read discs. It's usually the older models but even the revised one. The cheap top loading ones seem to be ok. I even have a 360 that freezes when playing through a disc after a few minutes of playing.

Hi Vince.. Do u sell all the consoles u fix? I'm all the way out in South Africa...but it would be epic to own something that u personally worked on.

Hope you steying safe

Thank you...thank you..you save my life..my ps4 have same problem..and fix now

great fix

The two prongs that connect to the power supply are known to be really very stiff and hard to separate. One just has to wiggle and pull on the PSU on the side of the prongs for a while. No way around it.

Finally you fix a console

To clean the inside grooves of fans, you should get those thin interdental brushes or a floss brush.

I’d like to be convinced there was an issue with the laser by seeing the “good” PS4 running OK with the new replacement. You never know😱😱😱

@MyMateVINCE Hi there! i have this ps4 controller and it's got like damaged spike parts near r3 button, so basically it looks like my controller has been chewed on, i was wondering can i use sandpaper to make it smooth? thanks

As lasers get older they use more power which causes more heat. The focus is done by a "voice coil" that gets hot and looses its ability to hold the laser up. The result is sometimes you can adjust the focus to get it working but will not last. Sorry this is a bit poor explanation but its the jist of it.

When you flipped the laser assembly over there was a silver cover. I need to take off that silvercover there's a mirror underneath that that's probably just dirty

Oi mate, that’s all well and good. Brilliant repair. But bloody hell, take the old laser to bits! Lets see the mirrors! Destroy the old sled bruv!

If this is what smoking does to a PS4 then just imagine what it must do to a person's lungs.

haha funny looking "screw" ;)

Quick question which is better to use on a ps4 a shop vac or can of air to clean the dust out of it.

2:50: "Works better without any power supply in it" - LOL but damn 32:17: Yeah no kidding (at "the beauty of » 20×") hahahaha

STEVE FROM TRONICS FIX YOOOOO IM A BIGGGG FAN OF YOU!!!

Hi Vince, nice video.😊 I have a broken ps4, that i think would make for a good fix it video for you. What's the best way to contact you? Love your content.

Hi Vince, I have the exact same issue(first time light for 1 sec 2nd time nothing then repeat) minus the disk problem I tried fiddling with the sockets that receive the prongs for good 20 minutes inserting and removing power several times. I thought I was doing it wrong so I temporarily soldered wires on each prong and inserted in the sockets(continuity checked ok) still no luck. Inserted multimeter probes alongside wires in socket and I saw it supplying 12 volts for a sec and then off. Fan moves a little than stops(just like ur APU blod ps4 video). Any tips? I really love ur videos by the way they are very informative really appreciate your honesty and your step by step approach.

Too funny you posted this I just finished diagnosing and partially repairing a PS4 Pro. Had a faulty hard disk which I replaced then got an error when installing the firmware that pointed to fuse F6202. Removed the fuse and bridged the connection temporarily with an extremely tiny jumper wire (~2mm) and the firmware could be reinstalled on the new hard drive. The disc drive had a bend in the top plate so I bent that back into shape and it will take discs in but can’t read them. I’m wondering if I can get that fuse and replace it if the disc drive will be able to read the discs. It loads and ejects just fine. A new fuse here in the US is about $14 after tax and I don’t have a reflow station so I’ll have to pay a local shop about $10-15 to do it for me but I think that would be worth it to get the disc drive fully functional again. What do you think?

This is what i'm talking about. Thanks.

Good vid

Looks good

if there is a potentiometer (1 or 2) near the laser try and adjust it. It may take some trial and error. Sometimes it works 😜

Where the metal springy bit go from underneath the APU clamp?

would you consider doing a faulty original xbox, gamecube or ps2?

I have an original Xbox that has a problem with the CD drive The previous one I had had a mechanical issue with the disk drive and when I remove the disk drive it started blinking red and A warning on the screen appeared And when I connected it back the warning disappeared and the Xbox worked normally except for reading discs The other Xbox when connected To each disk drive thinks that there is no disk Drive connected and the fan doesn’t spin i’ve swapped the fan with a working fan and it still doesn’t work I swapped the hard drives I swore I swapped the disk drive to another Xbox and just it’s still doesn’t work And when I Open the disk drive and plugged it in the Xbox It didn’t stop spinning and when I insert a disk it didn’t read it 90% sure that the lasers burns but the disk drives for the original Xbox are pretty rare and buying another Xbox is like a buying a heavy paperweight so can you tell us how to swap the laser

I have a similar issue with blood on a ps4 1001. The light turns on for 2 seconds and turns off. There is no fan spin. I found roaches in the system (got it off ebay). They were mostly in the psu, so that leads me to believe that the system needs a new psu since the fan does not spin within the 2 seconds. I ordered an new psu so hopefully that fixes it. If not the HDMI port is damaged so im going to remove that and check again just incase an HDMI pin is bridged.

😬 when you were straightening the contacts in the power supply I was yelling NO NO NO at the tv.

26:28 this is why I think USB ports need dust caps, they can be left unused for a long time and fill with dust and then something plugged in and the dust gets jammed further inside

Noticing the fact the disc would only go in so far, it looks like the spindle is NOT in the empty drive position. Since you checked some of the mechanism that does move, why doesn't the disc go in all the way? only ONE thing can ever do that, the spindle or motor is in the engaged with disc position. The biggest clue of all was how far the disc would go into the drive. The drive was registering a disc when there was no disc. That's the first ting I noticed @11:48. Now, this raises the question as to why? Why would the drive be registering a disc? The disc would not go in as far as the hole as the spindle is in the way. Biggest clue of all. In oter words, the spindle mechanism does move up and down to release the disc, should this fail, then eiother it will be stuck in the position it thinks a disc is in the drive and potentially, the motor has failed or a component more directly connected to that mechanism has failed. Maybe the drive was taken apart and nOT put back the way it should have been meaning the spindle was stuck in the wrong position when put back. Not sure but it was definately in the wrong position when you tried to put the disc in, as proven by how far it went in.

The two prongs under the power supply was bent by the perso who take it apart before, i had a ps3 slim with the same problem, bent connector and stuck power supply.

Hi Vince my Nintendo Switch joy-con has a drift want do I have to do to fix it

i gotta ps4 yesterday but its a blod will a new board fix it

I had a similar experience like the power supply getting stuck with the fan in my 60gb PS3. Found out it was because the thermal paste had set like rubber lol

this is good

normally for a disk problem (This only occurs with my copy of Far Cry New Dawn), is that it makes a few noises, refuses to read, and stops, I have to hit the top for it to work

Sweet

By the way I had the Samsung just drive in the first Xbox and in the second one I had the Phillips disk Drive I need your help please tell me what to do

That's not a BLOD, that's a fault with the electrical system. A BLOD means it turns on and the blue light keeps blinking. The original problem with it not taking disks in meant that the insides of the drive probably weren't aligned properly, if the drive was opened before (or the console was dropped). Also, what firmware is it on? If it has been sitting since 2019 without being turned on it might be on a firmware that is hackable, could be softmodded for all kinds of homebrew (and yes, piracy, but that is the least interesting part about softmodding).

when i turn my fatty ps4 on it beep once then turn of is it blue light of death?plzz tell me

Vince, you have a video that you fixed the laser chanced the ohms from some resistor... in this ps4 you could not do the same?!? the ps4 dont have this 'option'?!?!