TURBO FLUTTER for LESS THAN $10!! Works with ANY CAR! 

Look how happy a flutter sound can make a man

Sounds good! Mine definitely got louder after i put an ARC box in.

Just tried this on my n/a falcon, didn’t work 😞

My Brother picked up a Evo 6 at auction for 27k with a APT Gold Turbo, Front Mount intercooler and Injectors, might have to get it along to one of the cruises in Melbourne

I have used a smaller one of these as an insulator on the charge stud for the alternator in my RE Capella lol!

Sound great 🤘🏻

beautiful car brother

I have an adjustable gfb bov and just tightened it full tight so doesn't open lol

Can somebody tell me what COP he uses please?

can this be done on a 335i n55 engine? it has a bov

Benchmark Solutions Speed density kit with 3.5" Intake to suit Stock frame setup if you want flutter its the best thing you could ask for, Also makes driving an Evo 3x better with MAF in the fucking bin!

Steel inlet pipe makes it sound wayyyy better

lol watching this rn bc i crashed my brz so im looking up turbo flutter videos for my new Q50😂

Pod filter done and dusted

about a month ago i bought a blocking plate for my mums mazda 6 mps and i installed it but no flutter, so im guessing that the stock intake either muffled the sound that much or a vacuum line wasn't blocked.

Where does your vacuum line off the plenum closest to the throttle body going? I have an hks bov and it was routed to the bov but obviously since I want to delete it but I see you still have a line running off it. I blocked it off but no turbo flutter. Might be just stupid 😂

does capping off the diverter/blowoff make the car run rich? I know if i add a blowoff on my mk1 TT the engine runs rich due to the lack of the recirculating air the ecu has already accounted for

does it reduce power? i find with my car taking the vacuum line off and blocking it shut theres a significant difference in power. its more sluggish

Any car being a 2006 Nissan Pathfinder Turbo Diesel ? :p My other (well ok one of) projects , is a grey ex Zac Baldy R33 Skyline that was pulled off its belly .

Hey Zac, looking at gt86 turbo kits and whats the main contributor to the flutter sound. Many of them dont run BoVs but sound very different. the HKS one sounds epic, do you think thats due to the turbo housing (would you know if most modern turbos from garret and precission have anti-surge to prevent them sounding like 90s JDM cars?), intercooler pipe routing lenght? (many kits go around the bumper;long route vs some going through the crash bar; short route), or having a slight dose pipe? (some having filter connecting to turbo vs some having a 2-3" dose pipe for Map sensor).

would you need a tune after this ?

Another option is to fit the bov in reverse. Have done the same on my 6 😅

As an Aussie I'm sure you've heard of Turbosmart. Check out their video on compressor surge. That's why your hearing that violent flutter. It does sound cool, but I wouldn't recommend it.

are these mods unhealthy to your car instead of a blow off valve?

Much better! That BOV sounded like what a typical jdm lover 12 year old would want 😂😂😂

Hi zac Is this good for the engine?

Doesn’t the gfb bov not allow you to just close it and not vent to atmosphere?

Can my 2l diesel also make this sound?

Shit this car is quick

Does your turbo have anti surge?

But isn't compressor surge and the stu tu tu tu sound bad for the turbo?

Airbox is fine, you just need metal intake and charge pipes. And a bit more of straight length directly in front of the compressor. No sharp bends or sudden cutoffs or change of direction (back-to-back bends) either. Also, if you have an anti-surge housing, get a straight housing, instead, or block off the anti-surge somehow. You could just use an undersized pipe to bypass the anti-surge if you don't wanna mod or buy another housing. The absolute best dose will come from a non-anti-surge housing with a correctly sized diameter metal intake pipe that's straight and at least 3x as long as the diameter, with all metal charge piping. Anecdotally, different compressor wheel designs might also dose differently. If it's in the budget , try a 9-blade wheel, 5+5 blade wheel, and a 7+7, depending on what you already have and what's available for your turbo. Hell, a nice billet compressor wheel will be a solid upgrade in general, anyway.

Sounds good cheesy cheeseburger

did you sold your Rx7?

Wouldn't it just be easier to make sure the BOV stays permanently closed.

didnt work on my electric car any tips?

Great video Zac. Yeah I'm keeping my AU ll Ford Falcon SR sedan - Narooma Blue - it's an Automatic but could be converting it to T5 5-speed manual and it'll be Ford Gearknobs factory Grandpa spec looks for my strict liking - That's ok we all like different things. Look after your self and staysafe out there buddy. From William Mount Gambier South Australia

Will this work on my Supra 🤪🤪

We out here... Deleting 1 BOV at a time! Every like this video gets is 1 BOV deleted from this world!

🚨🚨🚨 ATTENTION Ya boy needs some new silocone couplers /hoses they are starting to look crustier than my only pair of briefs that i washed last month

Aren’t you building a turbo VS commodore on keep it reet ?

Seems silly to risk damaging the turbo to just make a funny noise.

Will be back when your turbo goes byebye

Gay