No video :(

TURBO ROTARY MINIBIKE First Drive! | Ep. 4

Подписаться 178 тыс.

Просмотров 92 тыс.

50% 1

RHB31 VZ21 Turbo - Amazon Affiliate link: amzn.to/3mMWAAu
If you would like to get a turbo of your own as well as helping our channel, use the link above!
This is episode 4 of the Turbo Rotary Minibike, where we took it out for the first test drive with the turbo! We changed the gearing to give it more torque but went a little too high, so we need to re-regear it. It sounds absolutely insane when driving and it seemed to be doing well and making boost! Next up is going full send and getting up to some higher speeds to see what it’s capable of!
Thank y’all for watching, stay safe, and be sure to stay tuned for the next episode, the FIRST DRIVE!
-----------MERCH------------
MERCHANDISE CUSTOM DESIGNED BY YOURS TRULY
teespring.com/...
--------------TOOLS------------
RogueFab Tubing Notcher
www.roguefab.c...
Pro-tools Tubing Bender
pro-tools.com/...
Optrel Crystal 2.0 Welding Mask
usa.optrel.com...
Optrel Grinding Mask
usa.optrel.com...
---------MUSIC --------
Music - Background and Montage Music Is From Endemic Sounds
www.epidemicso...
Intro Song - Jimmi by Andrew Applepie
• Andrew Applepie - Jimmi
-----PARTS-----
RHB31 VZ21 Turbo - Amazon Affiliate link: amzn.to/3mMWAAu
Pulse Pump- www.gopowerspo...
Seat - www.gopowerspo...
Chrome Shocks - www.gopowerspo...
Chrome Wheel - www.gopowerspo...
Inner Tubes- www.gopowerspo...
Tires - www.gopowerspo...
Gold Chain - www.gopowerspo...
Fenders - www.gopowerspo...
¾ Lock Collar - www.gopowerspo...
Brake Band- www.gopowerspo...
Brake Band Pin- www.gopowerspo...
Brake Cable and Lever- www.gopowerspo...
Jack Shaft Sprockets - www.gopowerspo...
Jack Shaft Lock Collars- www.gopowerspo...
Jack Shaft (10 inch with lock nuts and key) - www.gopowerspo...
Grips and Throttle - www.gopowerspo...
Clutch - www.gopowerspo...
RLV Muffler - www.gopowerspo...
Weld On Tabs - Amazon affiliate link: amzn.to/2XOoIIv

Опубликовано:

21 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 245

@VasilyBuilds 3 года назад

That thing is sick! I wonder if a juggernaut would fit up 🤔

@brennensbuildsmoore5537 3 года назад

Better yet, another turbo

@davidsnyder6681 3 года назад

Vasily you need to stop watching yt and finish the damn mower cmon man where is it at?

@clickbaitpatrol2375 3 года назад

Lol

@Cryohh 3 года назад

Two of my fav powersports fabricators

@sawyernanook3964 3 года назад

No vastly builds can can watch yt like all us

@codykahn2173 3 года назад

Get a torque converter with medium/high gearing to fix that low rpm flat spot, and to give higher top speed, you could run premix, probably only 50/1 if you’re on pump gas right now. The premix will stop it from blowing up if you’re really worried about that, and of course porting the tiny intake it has would give a lot more power but I understand you don’t have a lot of time on your hands to fabricate something like that. But you could always Dremel out a little bit of material, and a rough intake surface helps mix the gas with the air better, cleaner burn, more power, bla bla bla

@Tampaboys 3 года назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-C0bw14RAXrU.html

@normladuke8462 3 года назад

That thing would be crazy, with an extra gear or two.

@Hellsong89 3 года назад

It would be possible to to do rather b welding build his own so it should fit tho this one too.

@chancellorboyle3142 3 года назад

Or 5

@spikewsspe 3 года назад

Back in 1963 I had a minibike with 8" wheels and a Scott-Atwater 15 c.i. Outboard engine on it with a water tank up front and it thermo-syphened to cool like a Model T auto. Anyway, I am writing because of your mention of 'wheelieing'. Don't know if that's a word or not. What happened is that the first time that I went around a corner & 'gassed' it, the wheel came up while it was laid over. A real heart stopping moment, I'll say! Got straightened up and rolled off the throttle. I watched out and never did that again. BTW, that engine was from a class "C" race kart. Fun tho', since I survived.

@Tampaboys 3 года назад

Y’all shop truck is really cool

@samsgarage1716 3 года назад

You Rock Adam

@Tampaboys 3 года назад

@@samsgarage1716 thanks Sam right back at ya bud

@Hitycooking 3 года назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-hbaGwxAhuCU.html

@petratical 3 года назад

1967 ish? Made tough.

@j.a.g.a138 3 года назад

you need to resize the intake ports to be round thats the air restriction that is causing the problems

@Hitycooking 3 года назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-hbaGwxAhuCU.html

@Brock_Landers 3 года назад

I wish y'all would've installed a boost gauge. That would've been really cool to see how much boost it's making. That Sachs single rotor is a beast with that small turbo on it.

@Tampaboys 3 года назад

Heck ya been waiting to see this cool lil bike to rip great job fellas

@BUILDNIGHT 3 года назад

Daniel is looking more and more like "Danielle." You're KILLING US, dude! (love the bike, though!) LOL

@Tampaboys 3 года назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-C0bw14RAXrU.html

@Hoggdoc1946 3 года назад

Exactly headbands went out in the 60's and even then only girls wore them. Guess college has taught him to be gender neutral.

@Alex0992 3 года назад

@@Hoggdoc1946 rock and roll people wore them shits in the '80s.

@Mikefestiva 3 года назад

Nice to see it ripping 👍 Thanks for posting guys!

@BuildBreakRepeat 3 года назад

Thanks Mike! appreciate it!

@JacobSherwood 3 года назад

Good work guys👍🏻 Love that the guy injured guy was the test pilot 🤣🤘🏻

@big420ccboiz9 Год назад

That turbo sounds so cool man awesome build

@megoingfast 3 года назад

6:56 that echo is like a sci fi bomber scene.

@Calthecool 3 года назад

A gold chain? Your mini bike is flexing.

@jeffscott9311 3 года назад

Love that 68, Chevy!

@pyrhus38fr 3 года назад

Maybe this question have been asked millions times before but I wonder where your intro song comes from. I really like it and didn't found it elsewhere. I can't wait to see your next videos! Thank you guys for sharing your passion 😊

@1981dasimpson 3 года назад

i really think it needs a torque converter even stock no turbo

@delta2904 3 года назад

ya I think so too when they don't have a gearbox

@1981dasimpson 3 года назад

@@delta2904 with the rpm been so high it just revs out to fast with out one

@delta2904 3 года назад

@@1981dasimpson yaa

@Hitycooking 3 года назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-hbaGwxAhuCU.html

@1981dasimpson 3 года назад

@@Hitycooking are you taking the piss advertising your own page on some one elses comments

@pancudowny 3 года назад

Tip: During the 1979 IMSA racing season, Mazda ran it's RX-7 entry with fuel injection... which helped improve it's mid-range throttle response & power.

@mikeeyyss2150 3 года назад

That thing sound like a 2 rotor! Amazing!!

@rexbostwick3830 2 года назад

I like his comment, "It does wheelies and I kinda don't like that."

@nathanpanter4625 3 года назад

Definitely need some higher rpm clutching, rotaries don’t make any power low rpm wise so if you could toss an adjustable clutch or a tq converter on it you’d be set for the track. Then dial in the gearing for top end and it would absolutely scream. Definitely check the plugs to see what your mix looks like and then you can play with jet sizes/ 2 stroke mix ratios to really bring it to life. Absolutely wonderful work guys, keep it up 👍🏼

@nwmaxbuilds8740 3 года назад

It would be cool to have a sequential clutch setup in that thing.

@Hitycooking 3 года назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-hbaGwxAhuCU.html

@Hoggdoc1946 3 года назад

@@Hitycooking Why did you post this video. It showed nothing about the topic.

@theunknown.3407 Год назад

It got that brap brap

@tke7mu0u 3 года назад

Adjust the pilot jet. Its the small screw under the carb nearest the intake side of the carb. Will help the low speed running

@tigattac 3 года назад

Very nice bike, sounds great! Good progression in the build also. I dont like the clutch band-break tho, those are scary with that much power. I am shure you could make a sprocket brake with some sort of mc calipers.

@reeseraymond2016 3 года назад

now its anti-lag time!

@freezerburn04 3 года назад

What’s not to like? Good clean fun. Awesome!

@justinbrand6585 3 года назад

Was this filmed outside of a Blue Man Group concert?

@BuildBreakRepeat 3 года назад

Lol

@ryanstraw7165 Год назад

This is so sick! I had no idea they made rotary engines this small lol

@glenwhitacre2754 3 года назад

Great job guys, but b careful with that break setup if u break a chain how will you stop it ,that's scary.

@coops3834 3 года назад

Sound's Awesome man! Nice work👍

@randomstuff3199 3 года назад

Looks sick, would love to see a boost gauge to see how much boost its making.

@christopherforsythe2329 3 года назад

Put a shifter cart transmission on it

@christophvonferrarikellerh2694 3 года назад

This turbo rotary minibike is so cool!😎🏍️🏍️

@Tampaboys 3 года назад

Wow it’s got some pep in it’s step now

@nicktennes5236 3 года назад

2.30 I hear a Drumline Baby!!!!

@PHUSII 3 года назад

this thing goes!

@jeeperzcreeperzz 3 года назад

Shouldn't it be smoking a little bit more even with boost?

@Tampaboys 3 года назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-C0bw14RAXrU.html

@jeeperzcreeperzz 3 года назад

The tank looks inadequate and if it doesent breath properly it could starve it for fuel. Needs bigger tank and better air/fuel

@Tampaboys 3 года назад

@@jeeperzcreeperzz ya I agree needs a bigger tank

@robertwayne2004 3 года назад

Thanks for sharing your friend Rob from Canada ✌

@capttom7772 3 года назад

MY TURN!!!!!!!! MY TURN!!!!!!

@robertwayne2004 3 года назад

Crazy cool thanks for sharing your build a friend from Canada Rob ✌

@sofakingdom3076 3 года назад

Loving the rotary bike. Coming from a man with a modded 2006 6port 6speed Rx8.

@Thewatson77 3 года назад

Very nice guys. It turned out excellent so far. I think with the right gearing and a stronger clutch , this thing would be a terror! 🙌🏻

@Ty-sm9cv 3 года назад

You guys should put rounder tires on it so that it can lean over a little better.

@braptasticfilms3791 3 года назад

If you took that motor apart and did some porting and open up that intake it would help a lot with throttle response but also you have a very long intake so of course the throttle is gonna be really laggy

@allenlord3679 3 года назад

Like to see this against BoostedBoiz turbo shopping cart

@elmerkoch3569 3 года назад

Oh shit that's the ticket boosted bois and build break repeat winning combo

@collinlaque964 3 года назад

This needs a 2 speed trans put on it, I love the build so far!

@louisianaredneck3755 3 года назад

Top speed run

@CPthetooladdict 3 года назад

Looking forward to seeing that thing rip great vid guys!!!

@felixf8924 3 года назад

Cool build. If you guys want, or when you can, you guys should port match the intake for better flow

@AimlessMoto 3 года назад

This is awesome... air up those tires!

@rydplrs71 3 года назад

Your making me remember snowmobiling with a boot cast on.

@fatbuddycat 3 года назад

It sounds good.

@markreeves7177 3 года назад

That did it! I'm Subscribed!

@erikd804 3 года назад

That thing Sounds grEat ..it needs to be on the street dont be scared! 👍

@downdirty8543 2 года назад

You boys have done a great job on that mini! Very impressed. Now, where would a guy find a Sachs rotary like that?

@tomlenza2768 3 года назад

I love his hair he looks like a big poodle 🐕

@rizkyakbar8928 3 года назад

Howly i forgot this guy restoring cj7 just realize this is the same channel

@philiprowney 3 года назад

Great build, would make a perfect pit-bike for a rotary drifter ;-)

@kartnerds 3 года назад

That sound ❤️❤️❤️❤️

@abrahampeshko1858 3 года назад

Thanks for the video

@ronnielamb5958 3 года назад

Hell ya love the content

@bartsimpson8902 3 года назад

I think i used to work with the tall dude riding the bike. at s&k moving furniture I was a mower tech

@colinhamer6506 3 года назад

get a RPM counter on it sounds like you are letting off just as it's about to sing

@billallen4793 3 года назад

A boost guage would help also! And they NEVER pulled the plug to see how it was burning...

@AllThingsElectric_ 3 года назад

Dope! But you guys need a better testing location. We need more shots of it

@lennym1273 3 года назад

Y'all are nuts, that's all i can say...

@jordanpike9778 3 года назад

Sounds like it has way more in it with different gears. Im eager to see what you guys can do with the gearing to change speed!

@nickrudd2568 3 года назад

Maybe a squirt of nos to top it off. Good job guys.

@7sins979 3 года назад

you haven't hit redline quite yet, sounded about 5-6k when the guy with the boot was riding.

@wagdbikerider 3 года назад

Damn I want one of these now

@loganjenkins8053 3 года назад

This is amazing

@6hana9 3 года назад

Next mission is porting intake and outtake

@allynhalterman5137 3 года назад

First 30 min yess!!!

@elevator9592 3 года назад

Try it without the muffler it seems like it may be restricted too much. Great build

@Baldys_projects 3 года назад

Sounds good

@samsgarage1716 3 года назад

Looks really fast.

@Watchmedome3017 3 года назад

Oh yeah you can tell it’s way faster than before.

@connoraguilar3949 3 года назад

Noice! I just put a 212 cc in a mini bike similar to urs and it does willys when I do full throttle 😂

@qup2rc808 3 года назад

boost guage and a tacho would help

@bradfulcher8490 3 года назад

Joe and I look like we can be twins

@leon.690sm9 3 года назад

you could put that rotary in a dirtbike frame that would be sick

@solocali1000 3 года назад

Pretty Cool. You guys wanna race it ?

@dontworryaboutit8445 3 года назад

someone needs to make a shopping cart kart the boosted boiz made one but it wasn’t really in depth lol

@hillonwheels8838 3 года назад

I still think your exhaust is to small diameter and your loosing out on some hp. My buddies twin turbo RX7 is now rocking 3.5inch exhaust and it came alive compared to the 2inch that was on it before.

@John_Makes 3 года назад

This gives me hope for my turbo bike build!! So tell us now, is that a streetported or bridgeported rotary? 😉

@bryduhbikeguy 3 года назад

Missing:College student,answers to Jason;Last seen heading west at @50mph yelling "The throttle's stuuuucck....".

@Hellsong89 3 года назад

I think its time to take this to next level and get fuel injection system and programmable ecu to optimize power.. also maybe get bit better turbo than that thing so there is not chance of engine failing due turbo braking.

@hunterpetrovich1154 3 года назад

I say put a way bigger exhaust on it. Just to eliminate backpressure completely

@wwand47 3 года назад

Yeah I agree the turbo already adds back pressure to the exhaust it needs a little bit bigger exhaust

@julianthomas2643 3 года назад

Send it to varus who built hurts rx7s rotory and see if he can port it

@geoffreyjones2000 3 года назад

You guys should be running premix

@felixf8924 3 года назад

I'm pretty sure they are, otherwise they would have already blown the engine, because they have been testing it out quite a bit.

@myth503 3 года назад

amazing

@valentindangel8121 3 года назад

jo guys in ur carburetor should be 3 jets low rpm mid rpm and high rpm

@saintdiego89 3 года назад

Put a 90 on that air filter might give you room for your leg.

@lyhaikudai3 3 года назад

Can you provide me a source of where you get the Rotory engine ? I want to start messing around with a Rotory and start learning

@DetroitMicroSound 3 года назад

I dig it! But did you consider a mini roots blower, instead?

@frenk4207 3 года назад

Where is ur intercooler?

@fryreartechnology7611 3 года назад

Yes I want one please! That’s so awesome. I just love Doritos (rotaries) and when they are turbocharged it as all the more better. That thing is so fast too. How many cc’s is it again? Might have to motor swap my Honda ruckus

@felixf8924 3 года назад

These are 160cc engines.

@generality9559 3 года назад

lmao good luck fitting that

@fryreartechnology7611 3 года назад

@@generality9559 bigger hammer and welder it’d fit lmao. But I’d like to keep it 49cc just because the laws were I live it has so many gray areas that make it fun

@prpapy07 3 года назад

From the thumbnail. I thought it was shot in a ice skating ring.

@wrenchinrust4741 3 года назад

Next maybe find a transmission that’ll fit so you can shift into another gear instead of just redlining it after about 30ft. Sweeet build tho and sounds mean