Turning An Ambrosia Maple Bowl with a 40/40 Bowl Gouge

Подписаться 140 тыс.

Просмотров 1,3 тыс.

50% 1

This video shows all the steps on how I turned a large bowl from a piece of Ambrosia Maple log. I turned this bowl with a 40/40 grind bowl gouge and a bowl bottom gouge. The bowl gouge I'm using is a Thompsons 1/2 inch V groove gouge. The bowl bottom gouge was purchased from Ashley Harwood. The Bowl Thickness gauge used in this video was made by Keith Tompkins
www.ashleyharwood.com/
www.keithptompkins.com/

Хобби

Опубликовано:

13 мар 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 14

@tinkerv1383 2 года назад

excellent Scott! beautiful bowl and great technique as usually! Thanks for taking the time and post the video.

@ScottsMiniWoodshop 2 года назад

Thanks for watching veronica!

@user-fv2yc7bf6w 7 месяцев назад

First time I've seen your videos. Very good and informative. Keep it up.

@ScottsMiniWoodshop 7 месяцев назад

Thanks! Much appreciated, and thanks for watching!

@turningprayersholly_fry5054 2 года назад

Great Looking bowl, Scott!! 😎

@ScottsMiniWoodshop 2 года назад

Thanks Holly!

@dblandshark 2 года назад

Wow pretty neat and interesting. It actually looks fun and very relaxing.

@ScottsMiniWoodshop 2 года назад

Thanks Dave. Woodturning is great therapy

@DougMilleratWoodSpunRound 2 года назад

Very nice.

@ScottsMiniWoodshop 2 года назад

Thank you!

@samriddle3591 3 месяца назад

Great job thanks

@ScottsMiniWoodshop 3 месяца назад

Thanks for watching!

@heidigresh2743 2 года назад

How many times did you sharpen your tools making this particular bowl? I have never been given true guidance about it.

@ScottsMiniWoodshop 2 года назад

Great question. I sharpened the bowl gouge before I started, before the last pass on the exterior, and again before I made the finishing cuts on the inside. So a total of 3 times. Sharpening the bowl gouge before the final pass helps keep sanding to a minimum. The bowl bottom gouge was just sharpened once. The bean and skew only get sharpened when they stop cutting properly