Tusk Aluminum Motorcycle Pannier Assembly & Installation

Просмотров 92 тыс.

% 464

Tusk Aluminum Panniers w/ Pannier Racks!
www.rockymountainatvmc.com/Sales/488/Tusk-Panniers?RU-vid&Tuskpannierassembly%26installation&Descriptionheader&RU-vidvideos
The Tusk Pannier Rack System is the perfect addition to your bike to meet all your adventure riding needs! Each pannier rack is made of durable 3/4" steel tubing and feature a 4 point mounting system to hold up in even the roughest adventure riding! Tusk has developed this system with aluminum panniers big enough to fit all your tools, parts and gear for your ride! Each pannier box is easily removed and installed onto your bike with our exclusive pin latch mechanism that securely holds your boxes in place. This rack system has been carefully designed and brutally tested to meet the demands of serious adventure riding. This video covers the assembly of the keyed latches and latch plates onto each pannier box. Get your set of Pannier boxes today @ Rocky Mountain ATV/MC!
Click Here To Subscribe To Our Channel!
ru-vid.com/show-UCQSXoYEPBXNPSx1hWbO2WRQ
Tusk Pannier Liners!
www.rockymountainatvmc.com/p/1033/60203/Tusk-Pannier-Box-Liners?RU-vid&Tuskpannierassembly%26installation&Description&RU-vidvideos

Хобби

Опубликовано:

1 апр 2016

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 43

@ZafodB3 2 года назад

I found that the locking screw hole, no matter how well centered (with the centering bolt) or drilled, had to be elongated on one side I could see how my custom tool holder could have interfered but this was not the case on the opposite side. If there is going to be water intrusion this is where it will happen! I used a gasket for a garden hose (new unused), it fit nicely around the lock washer allowing it to function as intended too.

@williamdillon7708 5 месяцев назад

This was very informative. Thanks, Bill

@keystomotoadventures2399 4 года назад

Thank you for the videos. I just installed mine today. Very happy with the results.

@lautarocuttica9581 7 лет назад

i just installed mine and i am super happy.. they are very sturdy and look surprisingly good on my KLR

@elcucuygarage Год назад

Our boxes didn't come with paperwork for this process, but that's okay since we have wifi! Thanks RM crew

@captsam54 5 лет назад

Those are the Medium Boxes.. Good tip on putting the boxes back to back for the templates are the same.. thx.. Mune will be here soon for my Honda Rally..

@TheMarky26 4 года назад

Great video..Im going too be doing this soon..

@mrantone916 9 месяцев назад

The best part of hard panniers is you can use them as tables when your motocamping .

@djk5876 4 года назад

Thank you very much.

@tunit3727 7 лет назад

I'm looking to get panniers for a wr. Just want to know if these are the medium boxes that you are showing on the bike

@colfaulkner1 7 лет назад

Real nice video. I bought a couple of endure jackets from you a few years ago. Very nice to deal with. You guys really know your stuff. Thanks

@rmatvmc 7 лет назад

Thanks for your support colfaulkner1! ~Vinny

@DonHavjuan 3 года назад

11/32 drill bit. How many hogs teeth is that? How many bananas? What's that in 2020 modern measurements?

@wjfawb0 7 лет назад

My medium boxes came in this morning from rocky Mountain ATV/MC. One of the lids is bent due to lack of styrofoam on the sides of the box and a corner impact. I guess I'll hammer it out and repaint it. The product would have been perfect if it had been packaged better.

@michaelcarpenter1121 7 лет назад

If you use steel washers and bolts with aluminium they will cause a chemical reaction and the softer aluminium will rot away. This was a problem with Kelly Kettles and they had to redesign their manufacturing process (distinguished by the use of orange rather than cork bungs). Just a thought.

@rmatvmc 7 лет назад

Thanks for your thoughts. I am not sure about the Kelly kettles issue, but we haven’t had a single issue with the thousands we have sold. Our engineers are confident we won’t have the problem you are talking about. If it helps you feel better, the aluminum panniers are powder coated. Also, I have never seen this issue with other aluminum parts used with steel washers and bolts that make up most motorcycles including all the aluminum framed motocross bikes. thanks *Vinny*

@michaelcarpenter1121 7 лет назад

Hi and perhaps it's due to being powder coated then. Good news all round then. Kelly Kettles used to have stainless steel rivets but now they are spot welded to hold the handles on their aluminium kettles. I've a stainless one to be safe, slightly heavier but takes more heat. Thanks, Michael

@allans7281 Год назад

Good installation instructions but it looks like there’s a zero tolerance for error

@DylanMarcusDUKE 6 лет назад

What size panniers are featured in this video?

@roam4fun853 5 лет назад

What size are these panniers? Thanks

@GamingwithGamerGirls 3 года назад

Just finished my install on a 98 Honda XR650L. Got the large size pannier. A little advice....don't drip thread-locker on the panniers, it stains them really bad....

@Eric19781 10 месяцев назад

Where are they made

@eaglestryker1338 4 года назад

My racks came with two saw blade-like washers as well. I didnt see them mentioned in this video. What are they for? My panniers and racks are tusk by the way.

@rmatvmc 4 года назад

They go with the internal locking knobs to keep them from vibrating loose.

@davidwilley6199 4 года назад

I’m thinking these are the smaller panniers?

@JacksonWestfall 4 года назад

2:10 wouldn't you use the extra washers on the lock acorn nuts...? just a thought.

@GamingwithGamerGirls 3 года назад

Not much thread would be available after putting on the washer. Some thread-locker with the acorn should be sufficient.

@palpinter4204 7 лет назад

I just got my Wr250r ,and about to order as well. Not sure if I want the medium or the large size... Would a Rotapax fuel can fit to the backside of the left rack?

@rmatvmc 7 лет назад

I don't think it will clear the rear tire and it would most likely need to hang lower than the pannier box to clear the latch? It's hard to say.. You might be better off mounting one on the side? Keep in mind you would be widening the rear of the machine.

@biohazzyt.5934 8 лет назад

Hi! looks very nice! how does the subframe of the bike hold up? are the panniers wider than the handle bar with the large panniers? thanks!

@rmatvmc 8 лет назад

Subframe's strong. No issues there. As far as width goes on some bikes, the pannier racks can kick out wider to accommodate bigger exhaust systems. But it varies with each bike. What it really boils down to is, you got to learn how to ride the bike with panniers on. Knowing where to put your front tire and pick a line so your rear end doesn't clip any shrubs or boulders.

@biohazzyt.5934 8 лет назад

Cheers! Me and a mate are taking our WRR's down to Ushuaia next year, need to adventurise them beforehand tough. not sure about which panniers or even soft lugage to take tough! how wide is the rack with the medium/large panniers on? could not find the information on your site unfortunately! do you have any long-time experience how the bike handles the added weight on the back especially off road? thanks!

@rmatvmc 8 лет назад

Biohazzy T. Complete width in inches on the WR with *large* panniers are 54" inches wide. Minus a 1-3/4" for *medium* pannier boxes. Both handle great with the weight. No issues at all.

@AvidEnduro 7 лет назад

what size of panniers is featured in the video?

@michaelsoberanes 11 месяцев назад

Do these create wobbling at high speeds?

@rmatvmc 11 месяцев назад

No it shouldn't if installed correctly.

@ColtonBlumhagen 5 лет назад

One of my acorn nuts provided didn't have any threads in it. What size is it so I can buy a replacement?

@GamingwithGamerGirls 3 года назад

One of my acorn nuts was several sizes too small.

@HarshYadav-yw2cn Год назад

Is there a way to mount these pannier to a non Tusk rack? There is no Tusk rack for my bike

@rmatvmc Год назад

Yes, these panniers are mostly universal and can be mounted to a variety of pannier racks.

@leegraves101 Год назад

I mounted mine to Givi racks. Just used the same procedure that they showed here, with brackets that I made from angle aluminum.

@yanhaozhang3828 3 месяца назад

Seems like I pay 400 dollar for this and I still need to drill a hole myself

@silentninja32 3 месяца назад

It's not 900 because you have to drill 16 holes and maybe extend some cables. If you don't want to drill go more expensive but if you want metal boxes under 500 they are the only ones trying to even get that target demographic and I appreciate them for it