Tutorial Inventor - 034 SHEET METAL - Practice (SM-001)

Подписаться 15 тыс.

Просмотров 27 тыс.

50% 1

Every tutorial brings new abilities.
You can slow the film on RU-vid by using the Settings (bottom right), selecting Normal, and choosing a subunitary Playback speed. If you misunderstand what I say by voice, then click on the CC and activate the English auto-generated subtitling
============================
IMPORTANT (English) - If you want the drawings for the parts in my collection of 100 parts you can buy the book ALBUM (4 euros) from Google Play by accessing the below link. Drawings are a universal language.
IMPORTANT (Romanian) - Oriunde s-ar afla în lume, vorbitorii de limba română pot cumpăra foarte ușor și la un preț mic cărțile mele în format PDF de aici: play.google.co...
În principiu este bine să se orienteze spre cărțile „MANUALUL (Inventor - 658 pag.)”, „ÎNDRUMARUL (Inventor - 374 pag.)” și „ALBUMUL (Orice CAD - 208 pag.)”
============================
You can read more about me here: grabcad.com/co...
If you click to SUBSCRIBE you will be immediately advised when a new Tutorial is released!
Download assets from www.fastgrup.r...

Наука

Опубликовано:

4 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 55

@duijeblok3479 3 года назад

Thank you Mr. Stancescu for the good lessons, learned a lot, the tip I got from my friend from Vaslui, and I can tell you that it is a very good tip. thanks again.

@prof-stancescu 3 года назад

That's great!

@Kalam-vg5zj Год назад

Prof Stancescu, your explanation is excellent, how you have described the dimensions is really helpful for me.

@prof-stancescu Год назад

Go ahead and enjoy!

@danielvalbuenahernando2187 Год назад

Thank you very much. Very well explained! "If the drawing is wrong, you are wrong" Best wishes

@prof-stancescu Год назад

Thank you - go ahead and enjoy!

@DisintX Месяц назад

23:04 - When you make the holes through the middle curved part, technologically is not possible. The tangential cut has to be perpedicular to the curved surface. To correct this, the part has to be unfolded then the cut command to be executed so that when you refold the part the edges will be created as in reality as the machine is punching the flat part, followed by bending. Thank you for the good job you do in teaching us.

@prof-stancescu Месяц назад

It seems to be a good idea. Let me verify. Thank you, my friend!

@prof-stancescu Месяц назад

I verified the model and am sure the holes are technologically possible. After bending the part a puncher can cut those holes without problems! On the other hand, this drawing is taken from industry, and we must respect drawings. Thank you, my friend!

@edoardodidonato3767 3 года назад

You are a great teacher, thank you so much!

@prof-stancescu 3 года назад

Glad you think so!

@MattyK166 3 года назад

Thanks for the tutorial. i found some great tips and useful tricks just going slowly and seeing how you used the dimension and mirror feature.

@prof-stancescu 3 года назад

You are so welcome!

@M07.engineer Год назад

Great professor you are sir. It is very useful tips and tricks sir...❤

@prof-stancescu Год назад

Keep watching

@ConstantinDancu 3 года назад

Thank you, Constantin! Very well done!

@prof-stancescu 3 года назад

Glad you liked it!

@JMVD48 2 года назад

Thank you very much for all the important hints you show us, it's not all that easy, I find understanding the cutouts 2 by 1 mm quite complicated.

@prof-stancescu 2 года назад

Glad it was helpful!

@helbertvalencia5690 2 года назад

Thank you Sir I have learnt a lot with your videos.

@prof-stancescu 2 года назад

You are welcome

@007connor1 2 года назад

Good lesson, greetings from Mexico!

@prof-stancescu 2 года назад

Thanks! 😃 Good luck Mexico!

@christophedupont5490 4 года назад

Thank you very much

@prof-stancescu 4 года назад

You are welcome

@nileshbehere7535 8 месяцев назад

Well explained professor

@prof-stancescu 8 месяцев назад

If you want to place my BIG POSTER on your room's door JOIN my channel. Watch my tutorial no. 361. Thank you!

@obendrayadav3099 3 года назад

new keep making video like this sir for sheet metal drawing

@prof-stancescu 3 года назад

Sure I will

@adanbanuelos1266 Год назад

Very helpful! ❤

@prof-stancescu Год назад

Glad it was helpful!

@annguyennguyen7002 3 года назад

How wonderful

@prof-stancescu 3 года назад

Thank you!

@vuvanthem3401 3 года назад

thanks you so much!

@prof-stancescu 3 года назад

You're welcome!

@mjtunstall1976 2 года назад

Nice work but at the end of the tutorial with the flat pattern, all drawings MUST have same scale, not allowed to have 2 different scales to avoid confusion

@prof-stancescu 2 года назад

I placed the flat pattern only as an information, not as part of the drawing, but you are right - thank you my friend!

@imo197501 2 года назад

Hi Sir! If you had selected "Mirror solids" instead of "mirror features" your work would have been faster. By the way thank you!

@prof-stancescu 2 года назад

Yes, you are right - thank you!

@ddhirajgupta 3 года назад

Thankyou

@prof-stancescu 3 года назад

You’re welcome 😊

@gggraziano 3 года назад

Hi professor, are the workings at the 25:00 time line done with a punch?

@prof-stancescu 3 года назад

Yes, CUT is equivalent here with PUNCH

@paolococo7990 3 года назад

Salve Prof. Le chiedo scusa ma volevo solo un chiarimento. I due fori asolati sulla parte curva sono stati creati con un comando taglia da una proiezione di un piano, cioè come se vanno fatti dopo aver piegato la lamiera. Ma cosi non mi sembra nella realtà, perchè io li realizzo sulla lamiera in piano prima di piegarla. Io nel suo disegno ho usato il comando spiega e ripiega per crearli in modo da sembrare più reali. La ringrazio in anticipo se può valutare questa mia richiesta. Buon lavoro

@prof-stancescu 3 года назад

Paolo, io penso che tu intenda l'ora 17:05 - 18:19. Vedete, quelle due tacche si applicano automaticamente e si trovano su FLAT PATTERN.

@paolococo7990 3 года назад

@@prof-stancescu Salve Prof. La ringrazio per avermi risposto. Intendevo che se prova a ruotare il Flat Pattern di 180° il taglio della lamiera si vede diverso. Grazie veramente della sua attenzione.