Thank you for the demonstration. I use Jaktec machine, i noticed it just stops working when i turn it on wont move at all. Then it start to smell after a little time .I have to leave it for a day to start working again
Sorry sir the main purpose of Emel 8500-8900 is for chain stitch which we call straight sewing. You will need additional or an attachment to add other functions to it
Thank you for the video. I use direct drive and the tension area is not the same a this one. I don't seem to know how to loosen it. My machine is stitching in loops underneath.
Sir please my industrial machine if I am sewing out will be gushing out from under the plate I mean from the short hool to the needle pls what the problem@@alukosewingmachines3782
Thanks so much ... I appreciate this video . Please my machine is direct drive two lion. In my area we always have low current which can't carry my machine nd I'm always using power surge or guide before sewing. But once the light goes low, the machine would say erorr E-02. So my question is can i use a big stablizer to help increase the low current while sewing?
Sir, I wish I could subscribe to your channel 200 times. Pls I want to know what the white switch with on/off on the two lion industrial machine is for?
Hello Thanks for this video ❤Please I need ur help ,my industrial machine stitches is not tight and I’ve set it to number 2,it was in 3and half initially then I tried to turn it and it’s too hard so I loosed and tighten it bck but now even if I put it in liner 1 the stitches will still not be tight .:.please what can I do
You will do these in steps 1. Turn it to 2 2. Loose the nut 3. Turn the plastic to 5 4. Tight the nut 5. Turn it to the point where the machine Stich is not moving again( these might be on any number) 6. Loose the nut and turn it to zero. 7. Tight the nut
Weldone sir,I use two lion industrial sewing machine, the needle hit an heavy metal while sewing on speed, so it got broken and I replaced the needle but couldn't connect with the bobbin thread and I've tried all possible best but yet not connecting with the bobbin thread, what do I do sir
Thank you for that demonstration what size belt for a wimsew industrial sewing machine and a belt for the kansani overlocker ks021669z industrial machine and how can l get the pdf instruction for them downloaded thanks
Thanks for watching Sewing machine belt size is either 40 or 42 while overlock is 38. Check my video on how to reduce industrial sewing machine speed you can easily get how to insert the belt
Please my emel machine handle is stiff, i cant move it forward or backward and when i put it on, once i step on it to sew, the handle will stiff and the machine will go off but if i remove my leg from it, it will on again... Please what can I do to solve this problem?