Tutorial: Set-up of PAC50 pressure switch from SICK | SICK AG 

Unfortunately, the setting you requested is not possible. However, you can obtain quick information on the respective SP1 and RP1 or SP2 and RP2 by pressing and holding the left button. The sensor then switches to the so-called "Info" mode and the set values of the SP and RP as well as other sensor settings are displayed one after the other. This is also described in the tutorial. After running through the information, the sensor then shows the standard information on the display again. If it is an option for you, you could use the sensor in window mode. In this mode, the values for the upper and lower window values are shown alternately in the two lower lines of the display. This means that FH1 and FL1 are displayed alternately in the top line and the values for FH2 and FL2 are displayed alternately in the bottom line. The difference between hysteresis mode - i.e. operation with switching points (SP1/SP2) and reset points (RP1/RP2) - and window mode is described in the PAC50 operating instructions. If you have any further questions, you are welcome to contact our experts directly via info@sick.de . They will help you with your request.

@@SICKSensors amazing, thank you for your help.

You're welcome!

Dear @JeffreyDelluba, thank you for your question. The PAC50 sensor can also be used with nitrogen gas. Have a good day!

@@SICKSensors do you have sales office in the Philippines?

For the Philippines you can contact our technical experts directly via mail at sales.gsg@sick.com. If you would like to call, please find the relevant information below: SICK Pte. Ltd. 1 North Coast Avenue, #07-01 737663 Singapore Singapore Tel.: +65 6744 3732 Fax: +65 6841 7747 sales.gsg@sick.com www.sick.com.sg Our colleagues will help you with your request as soon as possible. Thank you and have a great day!

Thank you!