TwoTrees Sapphire Plus - CoreXY 3D Printer - Unbox & Setup

Подписаться 237 тыс.

Просмотров 64 тыс.

50% 1

Amazon Links
Buy it here: geni.us/VcxjaL4
Recommended: geni.us/JustVlads
Twotrees Sapphire Plus V1 3D Printer COREXY BMG Extruder MKS Board TMC2208 3.5 Inch Touch Screen Dual Z Axis
Full metal backplane: safe and stable, improve printing accuracy; high-precision slider: greatly improve printing accuracy and work efficiency. Extruder: no clogging, high-speed printing; double linear guide: reduce friction and improve printing accuracy.
Breakpoint detection: When the wire is broken, the out-point material-breaking detection module will start, and then stop printing and alarm to avoid waste of time and resources caused by material-breaking.
Resume printing after power failure: The model will not be printed when the machine is powered off. The resuming printing function solves this problem 100%. After the power failure, the operation interface can continue to print and complete the beloved model.
Touch color screen: 3.5-inch large-size touch screen: supports multi-language (Chinese, English, French and Italian) interface operation.
What you get is: A 3D printer, 0.2 KG filament (random color) TF card included (installation manual, accessories details, cura software package).
As an Amazon Associate I earn from qualifying purchases
My website: www.justvlads....

Опубликовано:

1 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 112

@JustVlads 3 года назад

New Channel: www.youtube.com/@Just_Print Buy Sapphire Plus: geni.us/VcxjaL4 Recommended: geni.us/JustVlads

@TheNature101 3 года назад

@Just Vlad I love your review videos. But considering how many have you done, which 3D printer would you recommend?? I'm mainly looking for high quality prints as the #1 most important feature. Reliability is #2... and speed is a very distant 3rd. So which 3D printer would you recommend for a 300x300 printer?

@dangerous8333 2 года назад

@@TheNature101 If all you want is high quality prints you can do that with a basic Ender 3 v2 or something in that price range. For more money you're not necessarily getting better prints. You're getting a more workhorse capable machine, faster prints or both. Doesn't sound like you need a CoreXY though.

@RichardBronosky 2 года назад

For the PTFE tubing, I sealed both ends with hot glue. Got some water boiling in a wok (yes a wok, the slope of the sides work better than a pot). Dipped the tubing in the water and removed the sharp bends. It's much safer than a hot air gun because water can't get hotter than 100°C.

@MisterkeTube 3 года назад

I think you have a "v1.1" instead of a "v1" as you mentioned in the description. The v1 has some room for improvement, but I don't think the v1.1 has improved the parts that needed it most. Only real improvement is having all steppers being silent, but that does not warrant the heavy price-lift from v1 to v1.1. The glass bed and "access door to the board" just don't sound worth it either. They could have saved on the belt coupling the z motors. There are 5 steppers, right? So, each z motor has its own stepper? Then what use is the belt, since it disallows driving them separately and hence you cannot use auto z leveling if you have a bl-touch or othe probe - which they really should supply for a 30x30 bed. The hotend also seems problematic, probably PTFE-lined and hence not suitable for higher temperature and limiting the speed you can go - and with a long bowden the long retractions will further expose the hotend flaws!

@Nobody-Nowhere 3 года назад

Printed fine 240mm/s with stock parts. And i have the v1 model.. it costs 330$ including shipping currently.. i paid more for it has been great for the money. The reason for the belt i simply to have both z motors mechanically synched so the bed stays level. I did that on my previous printer before i got this one, because its pretty much essential in keeping the z level. The hotend is not PTFE lined. Its not amazing, but the whole hotend with all the parts costs like 10$... so i can have replacement hand if it fails. I have had no need to upgrade anything in it... at some point i will tweak and tune it, but for no.. running stock firmware and stock parts, and prints fast & clean.

@MisterkeTube 3 года назад

@@Nobody-Nowhere Your heat-break does not have the PTFE tube run all the way down until it hits the nozzle? So basically you received one with an all-metal heat-break? Strange, I have seen no other reports of the Sapphire coming with anything else than a hollow heat-break passing down the PTFE tube ... As for the belt: in my eyes having a belt is a must if you have a single Z motor or if you have 2 Z motors driven by a single driver (since then anyway the motors are getting the exact same pulses at the exact same time). But having a belt between 2 motors with separate drivers makes little sense. Ok, you can get some more torque because the 2 separate drivers can deliver more current than a single one, but at the same time, the motors will be "fighting" each other. If one tries to move just slightly before the other gets its pulse, you have one of them trying to turn and the other one trying to hold things in place. Ok, the belt will likely be flexible enough to make this a minor problem, but still the belt in my eyes just puts unnecessary extra strain on both motors and lead-screws. Even with a belt, you cannot rely on the Z axis not sagging, so you anyway need to home Z after turning the steppers off.

@watchaprintinwillis2644 3 года назад

@@MisterkeTube not to but in here but there is also a V2.1 now.

@MisterkeTube 3 года назад

@@watchaprintinwillis2644 I actually consider that the most annoying "feature" of many Chinese printers: you can hardly predict what you will receive when you order because the version numbers just seem to get invented on the fly by the resellers.

@watchaprintinwillis2644 3 года назад

@@MisterkeTube indeed it is. But pretty much anything with a plug or a battery these days comes from there lol. The E-scooter market is the same

@iviaverick52 3 года назад

54:23 Vlad has seriously never even heard of Pokemon? Either that or it's a troll statement haha

@ivanbro1208 2 года назад

54:23 "a turtle mixed with a squirrel" ....... squirtle is a bit confused now

@David3o3 3 года назад

Does this come with a bltouch? i keep seeing that it does and that it doesnt lol. Im confused :)

@TableTopBiker 3 года назад

It's a clone.

@Hfil66 2 года назад

I am guessing the reason for numbering the parts rather than using text labels makes internationalisation easier. By having numbers, the same bag of parts can be shipped to each country with simply the manual being tailored to the local language (this having to be tailored for each language anyway).

@nlr5914 2 года назад

The black nobs you removed is to keep the carriage on the rails, so you don't get ball bearings all over the place if you have an accident during assembly or disassembly. I would have left them in place.

@fuzyy1700 2 года назад

when trying to home the bed, the bed would not stop rising even when touching the z axis endstop, any solutions to this problem?

@RichardBronosky 2 года назад

I decided to buy this when I saw so many videos claiming it was $330. I couldn't find it for less than $479 in Feb 2022. That's what happens when US money printer go BRRRRRRR.

@dangerous8333 2 года назад

Apparently all those versions had problems though.

@RichardBronosky 2 года назад

@@dangerous8333 it's definitely a "kit" and not a polished product. But I wanted an entry point with "solid bones" that I could make my own. This is the best CoreXY I could have chosen. I'm very pleased. It shows clear signs of constant improvement based on feedback that can be found in RU-vid reviews. The only issue mine had was that the Extruder Steps were set to exactly half of what they should have been. I was still getting great prints but they were weak. Now I'm just getting great prints.

@dangerous8333 2 года назад

@@RichardBronosky I agree, and I don't mind kits. I was getting ready to build a Voron. I'm glad to hear you like it cause I just bought one👍. Amazon has a $40 off coupon right now. Arrives Saturday. Got a V6 on the way and I'm making a list of other things it needs. Trying to do this smart so I don't make any unnecessary upgrades. What I meant about the other one having issues was for the $330 one, which was a different version. So you got a newer version with fixes. It's a more polished machine for that $479...if that makes you feel any better 👍. Granted it still needs things. Thanks for the heads up about the steps. I'll be sure to check that.

@AndrewAHayes 3 года назад

I just bought an Ender 5 Plus 3 days ago and wish I hadn't it has been one fault after another, all the rods and leadscrews are bent and the GUI is a joke, if you have printed anything higher than 250mm the GUI won't send the bed to z home so you have to initiate another print and then cancel it once the bed has risen, I paid £178 more with Amazon than I would have by getting it direct from Creality for the security of buying a dud, I am seriously considering sending it back and getting this one!

@Poesghost 3 года назад

I ordered a Ender 5 Plus from Tiny Machines. They put it together, throw in some additional upgrades and flash their own custom firmware. You pay a little more but from what I hear you get a machine that's tested and should work.

@AndrewAHayes 3 года назад

@@Poesghost I might send this one back and order this core xy, I have a Pro 3d V-king 400 Core x,y that I built myself and it is awesome but cost me £1200

@denizkayra 3 года назад

@@AndrewAHayes Smart choice. This one looks better than 5+. Cheers.

@UnwrappingByMimiKoteng 2 года назад

Amazing

@TheWilliam1916 2 года назад

Very detail and helpful with nice voice, many thanks.

@annbur1308 2 года назад

You Like Saying "Literally" A Lot Cool

@reviewchan9806 3 года назад

that crack in spirilization is not from your couplers. It's an artifact from cura slicing where it'll abruptly cut through the vase.

@ChrisHarmon1 3 года назад

Just ran into an issue with cura slicing a part and leaving big gaps on version 4.10. I tried everything from +/- walls, +/- infill % and type. Finally I looked and noticed 4.11 was out so I tried that and it was fixed. No clue why but it was second time I had the issue.

@3dprintingcave778 3 года назад

when u leveled your bed you should of left it level and then used baby steps to adjust the hotend instead of turning all 4 knobs to get the hotend where u wanted it all u did was messed up your leveled bed not by much but baby steps are there for a reason to control the hotend height dont use the knobs to control that, great video as always

@flphil4537 3 года назад

Couldn’t you turn the calibration cube 45 degrees to test it? That way the “x” and “y” faces are one motor movements

@RichardBronosky 2 года назад

Brilliant!

@donaldhollingsworth3875 3 года назад

Have you had any of the issuse's that Aurora Tech seemed to have. She flashed the controls to Marlin & made about 3 dozen software changes while you were much ready out of the box.

@mehmetmustafa2112 3 года назад

Dont buy this shitty printer

@RichardBronosky 2 года назад

@@mehmetmustafa2112 if you consider it a kit, like a cheap Voron, what is shitty about it?

@dangerous8333 2 года назад

@@RichardBronosky Watch Aurora techs and My Tech Fun reviews.

@RichardBronosky 2 года назад

@@dangerous8333 I did. That's why I bought one. I love Aurora Tech!

@dangerous8333 2 года назад

@@RichardBronosky Same. Those are practically the only two channels I trust now... But the older version had a lot more problems than the one you got. That's probably the version he's talking about.

@brianwild4640 3 года назад

lmao was just typing take the plug off when you said it

@matiasvignati5598 3 года назад

u could try to loosen the z rods couplers and make both rods to touch the motors axis in order to reduce the layer lines, that worked for me. Great video man

@zekitez 3 года назад

Great video. It helps a lot assembling my Sapphire Plus at this moment. What I miss is: that the blower cables are to close to, even touching, the heat block ; the XY belts do not have the correct tension and are attached... not as expected. Mine came with all cables already routed outside the cage.

@btekkenyo 2 года назад

I bought a bluer plus. It broke down in less than a week. Control card ,stepper drivers ,3d touch all burned out. Two trees do not cover any damage. They say it's guaranteed but there's none. Know that fact before you buy. I will never buy any product branded two trees.

@xkraltr6810 2 года назад

hi i am looking for corrupted software please help. There is a software with a double Z stop on it, but there is a single Z stop on my printer. I thought I could do it by saving the software on the original site of two trees, but the print quality is very bad, there is even no, it goes to the left where it should go right, it gets confused and it stops, so the software is broken. Please help me with new software. Thanks in advance. (I have 5x2208 drivers) Kind Regards

@plixplux 2 года назад

Thx bro - I didn't understand the manual regarding what you showed at 13:00. Very happy I checked your video out before I built the whole thing up wrong =)

@jovannihernandez6696 3 года назад

This or the tronxy x5sa pro

@taylorhills7387 Год назад

Great review! I love your in depth explanations. I have a Sapphire Plus and I am hoping I see the comparison with the Sculpfun S10😁

@thelightspeed3d712 3 года назад

Welcome back Vlad! Missed you!

@ChrisHarmon1 3 года назад

This machine is very well thought out. Even the Z screws have an old ham style coupler design with machined cut outs for the brass nut to move around in helping eliminate Z banding. During the build I only found the 2020 extrusion to be poorly mounted at the ends where it meets the 2040 extrusion corners. Instead of having a screw go through the 2040 extrusion it simply has a socket cap screw that screws into the 2020 extrusions ends and slots into the 2040. Not a real big deal. Also some sort of belt tensioner for the Z steppers would be nice incase it loosens up in the future(mine was good from factory though). Really an ideal machine.

@ChrisHarmon1 3 года назад

Forgot to mention as of oct 5th 2021 the current version sapphire plus on Amazon comes with the newest extrusion, lattice glass bed, dual belted Z steppers but no auto Z leveling. The linear rails were all very impressive vs the ebay MGN12s and HGR15s I have purchased in the past.

@RichardBronosky 2 года назад

@@ChrisHarmon1Same here in Feb 2022

@leonardojoy 2 года назад

Hello Vlad. How did you fix the problem with the center of the table being uneven?

@victorstacks7803 2 года назад

What does it mean when you say give it a slice

@Atiulsaad 2 года назад

i have a sapphire plus I can't use it. The sensors of the limit switch on working

@Marguiva3 2 года назад

Have you the firmware because mine doesnt work at all

@mamatuja 2 года назад

Don't worry, sharks grow new teeth constantly.😁

@mx83toy 3 года назад

Hi Vlad love your channel, I'm tossing up between the saphire pro the tronxy d01 or 5xsa (non pro) knowing what you know having all three what should I go for

@msessenceofreality 3 года назад

Insane spaceship!! Imma make my DREAMS COME TRUE 🤩🤩

@RCandFPVJonathanNL 2 года назад

never use cooking oil! it will dry up!

@thomasgauthier8987 2 года назад

Hi Vlad where did you find the plans for that spaceship?

@nikkizhao8746 3 года назад

I just sent you a business email, looking forward to hearing from you, and thank you

@TableTopBiker 3 года назад

Send me one too. Lol

@nicolaasalbertse3473 3 года назад

Nice video, would you reccomend this printer?

@waskito3443 2 года назад

Seems like a bad deal at $500. for that price you can make a voron 1.

@dangerous8333 2 года назад

Mind sharing a parts list? For the same build volume. I only see 0.1's for 4 to $500.

@hankb7725 3 года назад

great video man. thanks. this printer is really impressive as you said. I already have two core xy printers and still tempted to get this one. corexy in general are always better than i3.

@therambler3833 3 года назад

Vlad did you get any problem on the hot end

@charlesrestivo870 2 года назад

Nice video but could be edited to be shorter

@TheOrgonaut 3 года назад

what country I'm watching

@ajc4477 3 года назад

You really didn't read the manual, did you? lol

@helomike7000 3 года назад

Very good review, thanks for sharing.

@seanwood5443 3 года назад

Lol wolloed out haha yea that's sound like the correct term

@paulthetexan 3 года назад

It's "wallowed out" and it just means partially enlarged so that the screw head goes down inside it and doesn't stick out. It is in fact the correct term.

@makewithmegma 3 года назад

💕👌😍👍

@HariTuru 3 года назад

So with most of the printers that you review, is it possible to sculpt a piece of wood and have these printers copy the sculpture?

@watchaprintinwillis2644 3 года назад

if you have a 3d scanner too

@josephjolly1936 3 года назад

Thanks for the video.👍

@jamescullins2709 2 года назад

Will it print flex filament?

@futuretechnology3620 3 года назад

Nice

@MamasFunkyMonkey 3 года назад

I bought one awhile back never could get it to work had to rebuild it very frustrating

@rongafron2204 3 года назад

I got mine last October, and am just now getting close to the point where I think I can print something. Now, that includes some time where I had to put it aside for awhile because I was just getting tired of it. The manual isn't very helpful, and mine was missing parts. For example, no bracket for installing the material detection sensor. The thermistor wasn't working and had to get a new one shipped. It came with a BL Touch, but no instructions on how to install or use it.

@MamasFunkyMonkey 3 года назад

@@rongafron2204 thats about when i got mine sensors never registered for z axis i ended up changing all end stops and putting a duet 2 wifi in

@annbur1308 2 года назад

what slicer do you use?

@RCweasle7 2 года назад

Definitely have this same question.

@donaldhollingsworth3875 3 года назад

What upgrades would you recommend for this printer?

@jgxbernardo 3 года назад

A new Hotend right of the bat. The original one is a steaming pile of garbage. But nothing more than this is really a necessity...

@RichardBronosky 2 года назад

I'm going to print a new mount so I can move the extruder to the top of the Z rail instead of the back corner. That will let me use a shorter Bowden tube.

@michaelgarcia8271 3 года назад

A good video might include the presenter reading the manual BEFORE they find out they put it together wrong.

@rongafron2204 3 года назад

If the manual that came with his version is the same as the one that came with mine, which I got a few months ago, it was, well, not helpful at all. And, in fact, after watching a few videos on assembly of this printer, the order of assembly in the manual isn't the best way to assemble it, as it makes installation of some later components more difficult.

@michaelgarcia8271 3 года назад

@@rongafron2204 I agree with your comments, but if he HAD read the manual he would have known this already and could have shared this. My problem with his reviews is he simply likes every product or excuses any shortcomings. I trust reviewer that give complete reviews warts and all.

@RichardBronosky 2 года назад

@@michaelgarcia8271 I disagree. I really appreciate the way he includes the mistakes and edits in the corrections immediately after. It serves as a warning to people following along with their own machine.

@michaelgarcia8271 2 года назад

@@RichardBronosky Fair enough but, like many folks here, I too, watch more than one video before making a purchase or trying something for the first time. Having said that, I rely on good presenters to tell me when there shortcomings, like poor documentation, but show me to right way to get things working, while making comments about would 'could' happen. Guess its just perspective but I follow other folks that warn viewers "don't do what I did", then show the mistake and immediately show how they corrected the mistake.

@blood3d814 3 года назад

Просто Влад?

@vanpham2527 3 года назад

Great video, thanks for sharing the build steps! From the link you provided, I think I purchased the same printer on Prime Day.(Usongshine). However, Aurora - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-pbYVlajSF50.html, showed the 3D Touch for auto-leveling in her build. I wonder if it can be added to your version. I plan to go through Aurora's firmware upgrade in the second video after receiving mine.

@rongafron2204 3 года назад

Both this and Aurora's videos are very good, and are the only reason I'm finally getting close to getting mine working. I'm also thinking about using her 2nd video to convert to Marlin, but I want to get it working first.

@cozmosland 2 года назад

so is it the later version that comes with the tmc2225 steppers. just going with what is on the website?

@DeusExAstra 3 года назад

I've been looking at this. I really want to get a CoreXY printer. But, I'd like to have a direct drive system. Thinking of buying this and swapping it to direct drive. Anyone have any experience with this type of conversion? Will there be any problems changing this particular one to direct drive? Any issues I should watch out for? What extruder/hotend combinations are recommended? What's the best quality and lightest ones I can look at?

@Nobody-Nowhere 3 года назад

Should have no issues, there is an identical machine sold under the name of "Elf Pro" that has a direct extruder. Just costs 140$ more. At the current price of the v1.0 i would definitely go with it, i have it and its been great. And if you upgrade it yourself, you get a better hotend/extruder combo. The hotend on this is not the best, so its the best upgrade you can do for the machine.

@DeusExAstra 3 года назад

@@Nobody-Nowhere This is great information, thank you! I had no idea there was another version of this under different name. I will check that out. But yeah, if I can do it myself then I can get the best parts that will suit my needs.