Tyre Puncture Repair Kit Tutorial

Подписаться 107 тыс.

Просмотров 7 млн

50% 1

Fixing a puncture in a tubeless car tyre using a puncture repair kit (tire plug kit). In this video I am only demonstrating how to use the repair kit. I am not recommending the use of the kit as a replacement for a professional tyre shop repair but as a temporary repair to get you to a tyre shop and have it patched professionally. At the end of the video you can see what the process looks like from inside the tyre. The tyre in this video had no air in it so it was safe to take the screw out using a screwdriver. If there is air in the tyre, get a good grip on the screw or nail with a pair of pliers and carefully pull it it out. I would highly recommend wearing safety goggles as you remove it. Thanks for watching. Please comment, like and subscribe !.
~~~~ Tyre Repair Kit Link ~~~~
As an Amazon Associate I earn from qualifying purchases.
🚗 Tyre Plug Kit ~ amzn.to/3OjGScp
🚗 Tire Repair Strips ~ amzn.to/3b6Jm0h
🚗 12 Volt Tire Pump ~ amzn.to/3c1qjF2
Disclaimer: Screwsnutsandbolts is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to www.amazon.com
All of my uploaded material is protected under copyright law. None of my videos may be re-uploaded, reproduced or transmitted, in part or in full, in any form or by any means, without the written permission of the copyright holder.
© / screwsnutsandbolts 2022
Read important information below:
Disclaimer
Under no circumstances will Screwsnutsandbolts be responsible or liable in any way for any content, including but not limited to, any errors or omissions in the content, or for any loss or damage of any kind incurred as a result of any content communicated in this video, whether by Screwsnutsandbolts or a third party. In no event shall Screwsnutsandbolts be liable for any special, indirect or consequential damages or any damages whatsoever resulting from loss of use, data or profits arising out of or in connection with the availability, use or performance of any information communicated in this video. Due to factors beyond the control of Screwsnutsandbolts, it cannot guarantee against improper use or unauthorized modifications of this information. Screwsnutsandbolts assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Screwsnutsandbolts recommends safe practices when performing any do it yourself repairs and or with tools seen or implied in this video. Due to factors beyond the control of Screwsnutsandbolts, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Screwsnutsandbolts.
Tire plug kit
Tyre plug kit
Mushroom plug tire repair
Tire repair kit
Tyre repair kit
Puncture repair
Tire puncture repair
Car tire repair
Motorcycle tire repair
Van tire repair
Truck tire repair
Puncture repair kit
Tire fix
Best puncture repair
Quickest puncture repair
Easiest puncture repair
Quick tire fix
Quick puncture repair
Easy puncture repair
Tyre fix
Puncture fix
Tire plugging
Tyre plugging
Tire
Tires
Tyre
Tyres
Puncture
Punctures
Repair
Repairs

Авто/Мото

Опубликовано:

15 ноя 2018

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 2,8 тыс.

@screwsnutsandbolts 10 месяцев назад

Parts and Tools: Tyre Plug Kit ~ amzn.to/3OjGScp Tire Repair Strips ~ amzn.to/3b6Jm0h 12 Volt Tire Pump ~ amzn.to/3c1qjF2

@piggly-wiggly 3 года назад

The view from inside the tire was a brilliant stroke!

@screwsnutsandbolts 3 года назад

Thanks very much ! :)

@thehoerabbit1303 3 года назад

Indeed ;)

@screwsnutsandbolts 3 года назад

@@thehoerabbit1303 :)

@Mikenike88 3 года назад

I’m pretty sure that tire got pregnant afterwards

@screwsnutsandbolts 3 года назад

@@Mikenike88 I have 3 little Michelins running around now :)

@sainiranjan40 Год назад

No nonsense, no background music, no garbage, straight to the point. Haven’t watched such a quality video ever on RU-vid. With this one video you got another subscriber in your bucket. Thank you very much! 🙏🙏🙏

@screwsnutsandbolts Год назад

Thank you very much ! :)

@shahadbutt3633 Год назад

👍🏻

@jonasenck Год назад

but how long should it cure before driving again?

@sainiranjan40 Год назад

@@jonasenck Good for 10 days

@saravanansara498 День назад

Tq very much❤

@Iolis 3 года назад

No long waffling irritating introductions on this vid. Straight to the point, concise and valuable. Many thanks.

@screwsnutsandbolts 3 года назад

You're welcome, thanks for watching 👍

@davewalkerden 3 года назад

Finally, a tyre repair tutorial from someone who actually knows what they're doing. Thumbs up for you Sir

@screwsnutsandbolts 3 года назад

Thank you very much :)

@SuperMax649 5 лет назад

No talking. Only Actions. Straight to the point. I really appreciate your video. Thank you.

@screwsnutsandbolts 5 лет назад

Thank you very much ! :)

@screwsnutsandbolts 4 года назад

@li d Thank you very much, I appreciate it :)

@dgcchenel5297 4 года назад

Cara menbuat ketupat tah

@sergiuciuhurianu642 4 года назад

Andy Azerg cumreconditionam tractor 415

@sarikshek2200 4 года назад

Yes

@joeduck 4 года назад

Dude - awesome "from inside the tire" cam shot! Actually helped me understand how the tool works...

@screwsnutsandbolts 4 года назад

Thanks for watching ! :)

@madradthyqia1235 3 года назад

Samee

@roniebuenamente1340 3 года назад

Same

@dahmanimustapha369 3 года назад

I've been always wondering how it work from the inside. Now I do 😁

@mazambeliqbal3487 3 года назад

Very easy 👍

@randalmurdaugh8378 3 года назад

when you cut away the excess make sure you cut every tiny bit you can, or the spinning of the tire will pull the plug out! only 55 years experience.

@MATAMOROS3000 3 года назад

U r correct sr.

@virginia7125 2 года назад

I use a die grinder with a fiber foam pad on it and buff it flush. The friction helps melt it in place.

@itsnotallrainbowsandunicor1505 2 года назад

It's not the centrifugal force that pulls that plug out, it's due to the tire skidding on the road due to braking. If it's due to the spinning of the tire then the plug was barely in to begin with.

@KJWalda Год назад

Thanks! That's a useful tip. 👍

@bgardiner3354 Год назад

Hard to do if the puncture is between tread runners

@Scottyhutch1 7 месяцев назад

LOVE the straight to the point, no two minute ramble. I wish all 'how to' vids were exactly like this. Thank you

@screwsnutsandbolts 7 месяцев назад

Thanks for watching !

@marknussbaum8394 5 лет назад

Yeah, it's pretty much that easy. As another reviewer has stated, it's easier to make this repair when the tire has pressure in it. You can make this repair without even taking the tire off if you don't mind laying on your side, partially under the car/truck while you make the repair. A couple of tips-- If the hole is small and you can't find it, mix 5% dishwashing liquid (Dawn, etc.) in water and slowly pour it over the tire with the tire inflated. The leak will cause a mound of bubbles which will be easy to see. The purpose of the reamer is to clean and slightly enlarge the hole. Don't ream any more than you need to in order to insert the plug. If on your first try you push too hard and the plug goes all the way into the tire, join the club. Everybody has done that. No worries, just put another plug on and try again. If you can't get the plug threaded thru the plug tool eye, take a flat screwdriver, insert it into the opening and very slightly pry it open. Then slide the plug in, pull the plug thru with pliers and remove the screwdriver. Use plenty of glue when coating the plug. Sometimes when removing the plug tool you'll pull the plug out. If that happens, try again and this time before pulling out use the pliers to bracket the plug tool and push down on the plug ends and tire face while removing the plug tool. This method usually works for good, but not always. An inside patch is better but it isn't perfect either. And, this method can address the growing problem of tire repair stores refusing to patch a hole that's even slightly close to the sidewall. A hole in the sidewall is not patchable and I agree the tire is toast. But more and more tire stores are telling a customer that a hole is "too close" to the sidewall and they need a new tire, when in fact they just want to sell you a new tire, or better yet, a whole new set.

@screwsnutsandbolts 5 лет назад

Thanks for the information !

@keithdouglas4581 5 лет назад

Has to be a good quality liquid soap, some cheap ones wont even bubble,as I've found out !!

@algorithm6291 2 года назад

Why not manoeuvre the vehicle so the puncture hole is on top so you dont need to lie down

@algorithm6291 2 года назад

It is illegal or against policy for a tyre repair company to try and sell a new tyre instead of repairing it. They don't try that on company or fleet vehicles.They are not allowed.

@bonkeydollocks1879 2 года назад

@@algorithm6291 the front wheels can be turned and pointed out, if it's a rear wheel you have the wheel arch in the way

@trapp7763 4 года назад

I've been doing this for over 40 years. Never had a problem. My dad taught me it. He never had a problem. Works every time

@sheethbiniadam3175 3 года назад

I like the fact that you put on formal shoes for this! Truly professional 😀😀

@screwsnutsandbolts 3 года назад

LOL I even put on fresh socks :)

@screwsnutsandbolts 3 года назад

@@iamnid It was moss, not poop . I didn't want to dirty my dress shoes lol :)

@JohnElHanafi 2 года назад

Dude, this was one of of the most straightforward, simple, informative videos of the process I have ever watched! Thanks. Looking forward to fix my tire.

@screwsnutsandbolts 2 года назад

Thanks for watching ! :)

@MzwandileHarmans 2 года назад

Looking forward to fix your tire 😂

@HarryKlonaris 4 года назад

I’ve been using these since 1988, approximately 30 times, and each time the tyre lasted its entire life without further intervention to any of the plugs. If done properly, no leaks, no issues - follow the manufacturers instructions precisely.

@thisisarandomstring Год назад

Have you done this kind of respiring near the shoulder of any of the tyres and how long do they last usually? Every tyre shop I spoke to would just refuse to repair if the puncture is outside the central 1/3 width.

@mikeuk8486 Год назад

@@thisisarandomstring mate they work on the edge of tyre just as well. Don't get robbed by tyre man

@delvictor7570 Год назад

@@thisisarandomstring That’s for warranty purposes they don’t do it. The tire manufacturer voids the warranty. Sometimes shoulder patches leak and sometimes they don’t. It doesn’t hurt to try and it certainly isn’t dangerous like so many clueless people say.

@TeamGun Год назад

@@thisisarandomstring a plug will outlive a tire easily.

@bigglyguy8429 3 месяца назад

I followed the instructions, and see from this that I did it wrong! The instructions got my fingers covered in glue and no glue on the strips, just the needle.

@djmightymurph 5 лет назад

I own a 32 ton tipper truck and these plugs are a god send! I carry an air line and can pull a nail out, do the repair and blow tyre back up to 110psi in ten minutes.

@topmates3723 3 года назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-_ULpVwVGLVY.html

@Tintoycar 3 года назад

This works, even did it with a new tyre and drove it for 60 000 km

@willnewing4240 2 года назад

2 years on and I’m using this video. Exactly what I needed. Straight to the point.

@screwsnutsandbolts 2 года назад

Thanks for watching ! :)

@steamwillrise 3 года назад

I've just repaired my rear motorcycle tyre with one of these plug kits. Seeing the internal shot gives me more peace of mind that its worked. Great video

@screwsnutsandbolts 3 года назад

Thanks for watching !

@sexypao19 2 года назад

As a visual learner best tutorial ever, straight to the point. Loved the interior view, I was curious on what it would look like from the inside. Thank you!

@screwsnutsandbolts 2 года назад

Thank you very much ! :)

@Cayden1988 7 месяцев назад

To all you big annoying RU-vidrs who make watching a video a job and a half to find the information WE'RE ALL looking for; this is how its done. Straight to the point and no bullcrap involved. I'll always come back to videos like these and support these videos over the other rubbish saturating the internet. Just take a look at all the comments. This is how it's done.

@screwsnutsandbolts 7 месяцев назад

Thank you very much ! 👍

@tommusic1958 7 месяцев назад

I'll echo that. I've lost the will to live half way through many a RU-vid tutorial listening to some prat who doesn't know the meaning of "Getting to the point"

@sk8rgrl2000 3 года назад

Thanks for the inside of the tire view. Im always worried that my plug is not in the tire far enough. Now I see that it only needs a small amount poking through. Nice.

@screwsnutsandbolts 3 года назад

Thanks for watching :)

@rcnelson 5 лет назад

Clear, well-illustrated, and to the point. The view from the inside was a great touch--I'd wondered how the tool released the plug, and your video shows it.

@screwsnutsandbolts 5 лет назад

Thanks for watching :)

@lynalllynall9082 4 года назад

Use these all the time brilliant bits of kit, get you out of some right jams.

@mickh1402 Год назад

Brilliant. No music, no talking. No nonsense straight to the point demonstration video. A pleasure to watch. Once again Brilliant.

@screwsnutsandbolts Год назад

Thank you very much 👍

@James-bv4nu Год назад

The best video of the bunch. Love it! I watched them all, and watching this one did it for me. 1) remove the screw or nail 2) use the reamer to (a) clean the hole and (b) make sure the hole is big enough for step 3. cleaning means if there were oil or grease, etc. you want to scrape that off, you want the hole to be pure tire rubber only, to ensure a good seal, if the hole is too small for step 3, you don't want to find out too late, so you want to mimic step 3, slowly push the reamer into the hole, and quickly pull out, if you can do this, then step 3 should go OK 3) thread the plug into the pusher tool, coat the plug with rubber cement, slowly push the plug into the hole about 2/3 in, then QUICKLY pull the tool out, the pusher tool has an opening at the tip, allowing the plug to disengage with the tool, I have read in other links that the rubber cement is not necessary for sealing, it is used only as a lubricant for the plug to slide in, some plug kits don't even include the rubber cement, 4) cut off excess plug, and re-inflate, nowhere do they tell you if you have to wait between steps 3 and 4, not necessary to trim off neatly, the road will trim off, 5) if still leaks, repeat steps 2-4

@jasonlewis5484 5 лет назад

I used these on a tyre and did burnouts, no problem. Always carry them on my car as if you see a nail or screw in your tyre you can just pull into a servo and fix on the spot without removing tyre. Never any issues with them.

@jasonk795 5 лет назад

Found a nail clipper once in a tire. The customer love it when you give them what punctured the tire.

@rayzorray2437 3 года назад

Just attempted this yesterday on a puncture and was successful. Fantastic innovation

@peterphillips7867 4 года назад

I had one of these kits, but was never sure how to use it. Thanks for the clear and easy explanation!

@screwsnutsandbolts 4 года назад

You're very welcome :)

@shawnderrick 5 лет назад

Thank you. I have zero mechanical skills, but I just used this video to repair a tire. Thanks for taking the time to make it. 😎

@screwsnutsandbolts 5 лет назад

You're very welcome :)

@sicks6six 3 года назад

one of the best instruction videos on RU-vid, clear and straight to the point and no stupid music, external and internal views. 10*/10*

@screwsnutsandbolts 3 года назад

Thank you very much ! :)

@scottclifford1788 2 года назад

Thank you for not putting any stupid music, lame jokes, dumb comments, or promotions for your twitter in there. Great video.

@screwsnutsandbolts 2 года назад

Thanks for watching ! 👍

@josepeixoto3384 2 года назад

One of the best videos, really liked to see that the plug folding again onto itself increasing even more the sealing pressure around the hole,and forming a head inside...

@screwsnutsandbolts 2 года назад

Thanks for watching ! :)

@MLeung-vl7we 3 года назад

Ive found that its much easier getting the plug in if you let the tire go somewhat flat first (which you did). Its counter-intuitive while fixing a leak to let even more air out, but without a pressurized tire, the hole can expand and stretch much easier.

@rickwright7848 Год назад

To say that you were in a rush your video showed us better than other tyre repair videos And yes after watching this I did go out and buy a repair kit

@860general9 2 года назад

No music or bs speeches, just straight to the point so we can go an fix our tires. Thank you much, I’m now a new subscriber

@screwsnutsandbolts 2 года назад

Thank you very much ! :)

@BananaSlug911 11 месяцев назад

The view from inside the tire was the most genius and helpful thing ever. 99% of us are wondering is this even work, and if so, how? And you just answered it without saying a word. Thanks pal, subscribed

@screwsnutsandbolts 11 месяцев назад

You're very welcome, thanks for watching !

@roadwarrior8560 3 года назад

View from inside the tyre was a good idea, I wasn't too confident how good it would be but it bunches up like a mushroom.

@screwsnutsandbolts 3 года назад

Thank you :)

@mrnice88x 5 лет назад

We have a truck at our work, 20+ plugs, some holes are so big has 3 plugs. Holds air at 110 PSI fine no leaks. Been over 1 year solid.

@vsmh96 5 лет назад

These were meant to be temporary only, dont get people killed due to your tyres please

@RRaucina 5 лет назад

@@vsmh96 I have done hundeds and never a leak or fault. It is a good system as long as you use cement.

@mrnice88x 5 лет назад

@@vsmh96 Gotta take that up with the boss, I'm just the mule.

@rahrah8076 4 года назад

mrnice88x tire plugs are dangerous..if they drove on the flat long then the inside of the sidewalls are thin and a bunch of rubber shavings came off inside the tire..so you could plug it and wouldn’t even notice the sidewall being thin and could have a blowout and then the shop getting sued

@UberAlphaSirus 4 года назад

@@rahrah8076 Fella, if it's your own motor and you know that you didn't drive it, then happy days. I wouldn't recomend it for some thick tart that asked you to do it because people kept telling her tyres is flat for last 20 miles.

@talibbernard958 12 дней назад

It's been said by most but this was quick, simple and thorough. The reverse view from inside the tire was a gem.

@screwsnutsandbolts 12 дней назад

Thanks for watching !

@westtnskirmishlog6820 10 месяцев назад

Appreciate you very much. I was too embarrassed to ask anyone how, so thank you for walking us through. Saved me $40, thank you and God bless you and yours.

@jub8891 2 года назад

finally used one of these today after driving around with a screw in the tyre.. these things are amazing and i wish i had known about these like 20 years ago

@justinedcunha5520 3 года назад

Great. Thanks for silent and let action do talking tutorial. Highly appreciated .

@screwsnutsandbolts 3 года назад

Thanks for watching !

@vaibhavchoudhary4895 3 года назад

I used to pay 100 to 150 RS to Puncture repair guy for such an easy job.Bought this kit & air pump & I fix it myself now. Thanks buddy!!

@screwsnutsandbolts 3 года назад

Thanks for watching ! :)

@ravishankars1612 2 года назад

No hype, to the point, clear and silent video. The shot showing the inside of the tyre is very innovative. Thanks for the nice video.

@screwsnutsandbolts 2 года назад

Thank you very much !

@squidusn71 4 года назад

Great video!!! Straight to the point without BS and showing the inside process is the icing on the cake!

@screwsnutsandbolts 4 года назад

Thank you very much ! :)

@tylerrrrrrrah 2 года назад

At last...an instructional video straight to the point about what is needed to be done, and not about the person and their tools, and where they got them, and what to use and not to use etc etc etc I normally have to fast forward youtube clips to about 70% the way through just to get to the point. Well done and thanks heaps

@screwsnutsandbolts 2 года назад

You're very welcome, thanks for watching ! :)

@heavyaccept 4 месяца назад

Thanks pal! Recently I have had a flat tire caused by a screw lying on the parking lot's ground. I'm going to order a repair kit and I'll to do it by my own this time.

@mattylincoln4065 Год назад

Since it's already had over 5 million views, your video is obviously pretty helpful, but in case u see these comments, just wanted to say THANKS BROTHER! that was an awesome, super helpful video...no talking kinda makes it EASIER to follow, and adding the inside the tyre view REALLY makes a difference, as gives us a proper idea about how it all works, top job, thanks again man, you've just saved me $200!!

@screwsnutsandbolts Год назад

You're very welcome, thanks for watching ! :)

@gijoraj 4 года назад

Very nice video. Specially liked the last part showing how it works. The rubber stick compound have really amazing rheological properties. We can see that the compound flows when a high shear is applied as the needle is pulled out quickly. Really interested to see if the same happens when we pull out slowly. If not, then shear thinning is very critical for the success of the product. The video is also very useful for demonstrating to Polymer students on the principle of Rheology. Thank you.

@screwsnutsandbolts 4 года назад

Thank you very much ! :)

@pradap2298 2 года назад

what if we did cut that strip after applied

@marciaz31 5 лет назад

I love the video showing how it worked inside the tire … Thank You ...

@screwsnutsandbolts 5 лет назад

Thanks for watching :)

@laurajackson7594 Год назад

You are SO AWESOME for showing that “internal” view!!! Now I have a lot more confidence that this might actually HOLD UP for a little while! FABULOUS RU-vidR! I’m sharing this video with an explanation as to WHY! To my Facebook! Stating how thorough you were! If everyone took their job this seriously, we’d have a much more efficient world! Thank you!!! 🙌🏻👏🏻🙌🏻

@had2galsinthebooth Год назад

Well done video! To use this type of kit the tire can stay on the vehicle because the tools are small which is a HUGE plus to me. I carry a plug kit and 12V compressor for when there is no power for my big compressor on the road. This is the only type of plug kit I have ever used on pickup tires here in the states. It has never failed me and,working construction site with dropped nails/screws,I have driven unknowable miles on plugged tires over the decades. The only exception was when I got a 1/4" concrete form tie in the right rear tire one winter. On the 2nd attempt I had to use two plugs in that hole to totally stop the leak. I didn't feel so confident in it's long term use so I replaced the tire sometime soon after that night. That night was -20F. I fixed it at a friends country house out in the cold wind after dropping off another friend who worked for me,then drove 32 miles home hoping I wouldn't have to stop some random place and do it again. Talk about relief to see the lights of home! That double plug did not fail,I just didn't trust it for the long term. I do like the looks of some of the other type UK kits I see,I like them alot, but they look to be best used with the rim and tire off which would slow me down too much as a road repair. I would sure consider them for home use though!

@bent52telecaster 3 года назад

I’m so happy you made this, I got real high and wanted to see what it looked like from the inside, great job .

@screwsnutsandbolts 3 года назад

Glad you liked it!

@GH-wt7ww 3 года назад

Great video. Been doing this for years exactly accept no cement. I leave the tire on the vehicle positioning just right for me to work on. Fill the tire with air and locate object causing leak. Remove object and perform these exact steps. Grab my air compressor fill tire to proper psi. Not one has ever failed me. This method makes quick work.

@minot.8931 2 года назад

The cement is probably a good idea - it's not glue in the normal sense; it contains a vulcanising agent that melts the rubber it touches and then evaporates out, so it acts like a weld. Without it, in theory the plug could be blown out... but the comments don't agree, so it's probably not critical on a regular family car.

@h0ng_stuff 2 года назад

All along I’ve been paying $10 for tire repair when I can buy a kit for $7 and repair it myself several times with it. I thought there was a more complex way and for safety it needs a professional repair unlike a bike tire which I learned to change for a long time. I’ve seen the shop do it and it’s exactly this way so I finally did this myself. I had a rental that needed tire repair so I used it as my first test. Great inside view so I feel an assurance how it’ll hold up. 👍🏼👍🏼👍🏼

@screwsnutsandbolts 2 года назад

Thanks for watching ! :)

@wiscgaloot 10 месяцев назад

This is awesome. I was pretty sure I knew how to do this, I've seen my brother do it with the tire still on the car. But I just bought a used minivan that came with no spare tire. I already had a tubeless repair kit so I tossed that in the back and bought a 12V compressor. Unless I end up with something severe like a sidewall blowout I feel fully prepared to fix the flat and keep going! Well done.

@screwsnutsandbolts 10 месяцев назад

Thanks for watching !

@veronikaquick6738 Год назад

As with the other comments - no nonsense video, an easy job made clear for first timers and just followed your procedure today. well done !

@screwsnutsandbolts Год назад

Thank you ! 👍

@biggedybiggedybong8032 3 года назад

Excellent video.. brief, to the point and the end shot from inside the tyre explained it all in an instant.. Thanks from the UK for posting

@screwsnutsandbolts 3 года назад

You're very welcome, thanks for watching !

@jesusromero8827 Год назад

Wow it's amazing how you got the camera inside the tubeless tire . First I have seen how sticky rubber cement gets molded in between the holes so perfectly bonded in a sticky fibers.

@Nicefoolkilla 2 года назад

Thank you very much for making this informative video. I now have all the confidence I need to do this to my tire that has a rivet in it. The interior look was a splendid finish on top!

@screwsnutsandbolts 2 года назад

Thank you very much ! :)

@davehill7562 4 года назад

Great view. I've plugged maybe 5-10 punctures over the years and always wondered how it looked/sealed from the inside

@screwsnutsandbolts 4 года назад

Thanks very much :)

@waltersmith6100 5 лет назад

These things are awesome. I haven't changed a tire in over 20 years. Keep a kit in the truck at all times and have had many a flat out in the wilderness

@Anonymous-ho1mt 5 лет назад

20 years, dude tyres has a life.span

@waltersmith6100 5 лет назад

@@Anonymous-ho1mt multiple tires, multiple trucks

@Anonymous-ho1mt 5 лет назад

@@waltersmith6100 you got me in first half, not gonna lie :p

@contrarian717 3 года назад

I don't understand the downvotes. For a baboon like me, this was the perfect demonstration. Many thanks

@screwsnutsandbolts 3 года назад

lol thank you ! :)

@f1spencer 3 года назад

What a great video; just got my tire repaired @ a roadside garage (screw in the tyre) & had never seen this procedure before!? This video has completely pacified my concerns! Nice1 ~ Thank you 😊👍

@screwsnutsandbolts 3 года назад

Thanks for watching !

@IanRamon 4 года назад

The view from the inside was a great important show --I wondered how the tool released the plug, and your video shows it.

@screwsnutsandbolts 4 года назад

Thanks for watching :)

@pinakdesai3347 3 года назад

Yeah..same question I had

@SideDishRecipes_Official 2 года назад

very useful to tyre inside view

@screwsnutsandbolts 2 года назад

Thanks for watching !

@calabresedavid 2 года назад

I haven't had a flat tire in many years. Thought I'd better take a refresher course. I normally carry two fresh repair kits and an air compressor in my vehicle. You nailed it......... thank you.......

@screwsnutsandbolts 2 года назад

You're very welcome, thanks for watching :)

@mattrasmussen3232 2 года назад

Perfect instructional video. I don't know what you look like, what you sound like, anything about your sense of humor, what you do for a living, if you enjoy shoving sticky rubbers into things....but I know how to fix my tire. Thx

@screwsnutsandbolts 2 года назад

Thanks lol 😆

@OldJoe212 5 лет назад

I had a nail go in a tire head first. The hole was so large, I need 3 of the strips to stop the leak. Since I was planning on getting new tires soon, I thought this would be a really good experiment. The 3 plugs held for 3 months without losing any air, that was when I got my new tires. I was truly surprised. I wouldn't recommend using that many, but it worked extremely well.

@lucienpetersen9010 3 года назад

How did you get three strips through the eye of that needle tool

@OldJoe212 3 года назад

@@lucienpetersen9010 One at a time. First one didn't do much. Second slowed the leak quite a bit and the third one sealed it. Sorry, I was a little vague.

@lucienpetersen9010 3 года назад

@@OldJoe212 lets hope that i will never have to use this newly aquired knowledge. Thanks Joe!

@veegizzlemilliken6441 5 лет назад

Yeah i keep plug kit in my trunk ....a real life and money saver.!!👍😉😉😉👍👍👍👏👏👏👏

@ismailpatel5120 Год назад

simple and to the point!! No fillers, soundtrack or other bs.Absolutely Brilliant

@screwsnutsandbolts Год назад

Thank you !

@tonyrusso7292 2 года назад

The inside shot was like Hollywood, you should be a director, who would have though to see it from the tyres point of view . Deep pensive and thought provoking. Must see

@screwsnutsandbolts 2 года назад

lol thank you ! 😄

@itscotter6861 5 лет назад

I always pull out quickly

@screwsnutsandbolts 5 лет назад

lol :)

@stephennganga7499 5 лет назад

🤣🤣

@janstrnisa4702 5 лет назад

Fake news

@titanicrams 5 лет назад

Rofl 🤣

@screwsnutsandbolts 5 лет назад

Saves you a lot of trouble down the road....... :)

@vmcc9070 5 лет назад

Did it once to my Harley's back tire. Got the job done and allowed me to ride 8 hrs to get a new tire.

@blitzow3644 3 года назад

It could have went a lot longer than 8 hours

@LL-ue3ek Год назад

this is the only video that shows the view of what happens from inside a tire. it answered the question of what the rubber strip looks like inside after you pull out the insertion rod! thank you for the works! P.S. I think the final cut should be flush with the tire surface.

@mikedavies6319 9 месяцев назад

Excellent video - thanks a bunch! Now to try this on a leaking washing machine sump 🤔

@scott2228 4 года назад

Well done. Informative, straight to the point. Nothing excessive. Again, well done!!!

@screwsnutsandbolts 4 года назад

Thanks very much ! :)

@cac7549 2 года назад

Excellent demo. The picture quality and the steps are clearly shown. Very nice. Thank you.

@screwsnutsandbolts 2 года назад

Thank you very much ! :)

@juppster5694 2 года назад

Love the view from the inside! Gives me more confidence that the repair will last.

@screwsnutsandbolts 2 года назад

Thanks for watching 👍

@MATAMOROS3000 3 года назад

For years I have been using this method to patch the tires of my car . Thanks buddy

@screwsnutsandbolts 3 года назад

Thanks for watching !

@IPullingTractor 4 года назад

Whenever a plug is installed, ALWAYS snip off the protruding portion to prevent the plug from possibly being pulled out of the hole when the tire slips or spins on pavement. (I've had this happen before.)

@screwsnutsandbolts 4 года назад

Good advice

@tomprovan50 3 года назад

I used this method at a 24 hour service station 45 years ago did hundred of tires never had one come back. I did a water test them if I could to make sure before they left the shop, we used vulcanizing rubber compound for the glue

@virginia7125 2 года назад

Yeah, O'reilly's sells it. It's around $30 a bottle. Says "for professional use."

@saintpete3573 19 дней назад

Great video! I love how you captured every single step and also a bonus clip at the end. I repaired a tire before but was looking for a refresher. Thanks!

@screwsnutsandbolts 18 дней назад

You're welcome, thanks for watching !

@pharoahmed7681 Год назад

You are so helpful. I don't know how to ever thank you. Can't wait to be repairing my own tyres now.

@screwsnutsandbolts Год назад

Thanks for watching !

@motomookie8032 5 лет назад

Always wanted to know what it looked like from the inside. Thanks!

@screwsnutsandbolts 5 лет назад

Thanks for watching ! :)

@johnkerr8019 4 года назад

Thank-you for uploading the excellent video, quite cool to see how it looks from the inside of the tyre. I have been fed up payiing repair costs for punctures and recently purchased a repair kit, just getting ready to have a go for the first time and your video shows how easy and effective the repair can be. All the best from Old Kilpatrick, near Glasgow.

@screwsnutsandbolts 4 года назад

You're very welcome, thanks for watching ! :)

@markshoenus2591 2 года назад

After watching a number of videos this was the best by far!!! Bought repair kit from Habor Freight yesterday, fixed this morning. Thanks.

@screwsnutsandbolts 2 года назад

You're welcome, thanks for watching ! :)

@Warmsunset26 3 года назад

As I have seen the process via other visual footage. What is better with this one, is at the end is SEEN what it looks like inside. Nice.

@screwsnutsandbolts 3 года назад

Thanks very much :)

@michaeldasilva1718 4 года назад

Well explained! I liked the part when you went into the tire for the full in depth experience😎👌

@screwsnutsandbolts 4 года назад

Thanks very much ! :)

@tousshong9438 4 года назад

Great video! I have never seen plugging view from inside of the tire before and it's entreaty. Thanks for the special inside view.

@screwsnutsandbolts 4 года назад

You're very welcome. Thanks for watching ! :)

@russellwalker8702 10 месяцев назад

I just did one with small hole had to run drill throgh first you make it look easy..

@AvijitBiswasBlue 4 месяца назад

Thank you.. Easy & very useful. I was able to perform this DYI, with confidence thanks to the process shown. Worked like a charm for me to fix my Bike's rear tyre puncture.

@3adel2222 4 года назад

I like how you did it with just going right to the point. Thank you for the video 👍

@screwsnutsandbolts 4 года назад

Thanks for watching ! :)

@twoweeledsoto6072 4 года назад

OH YEAH!!! Nice internal shot!! I've always wondered why the patch doesn't come out with the tool when you quickly pull out. I didn't realize the end of the tool opens!! Nice video.

@screwsnutsandbolts 4 года назад

Thanks very much ! :)

@scottwins2 3 года назад

I have used these for years, they work great. Never put one in a sidewall though, maybe only to get to a Station. Make sure you ream the hole well or you will not be able to get the new one in. Use the glue but if you don't have any that's okay. Note: always get the upgraded T handle so you can push harder, the screwdriver looking ones are useless for pushing in

@virginia7125 2 года назад

Yeah, the screwdriver ones only work on riding mower & moped tires (tyres).

@screwsnutsandbolts Год назад

Thanks for watching ! Please support this channel by clicking the Like, Subscribe, and SUPER THANKS buttons. Your support will help me to continue and improve my videos 👍

@CarsExposed 4 года назад

Nice video mate, I’ve been repairing my tyres the same way for about 15 years and although there is a lot of discussions about this method I never had a problem 👍👍👍

@screwsnutsandbolts 4 года назад

Thanks !, me neither :)

@foivoslefkopoulos6679 2 года назад

Always go to professional to check the tire form inside it maybe damaged.

@erenoglu Год назад

Can i drive 200 on highway whit this ?

@FirstnameLastname-ur3ll Год назад

@@erenoglu 200, What are you trying to do, kill yourself or others on the highway?. How old are you? No adult in their right state of mind would even say anything out that. hat 9fast.Are you even human?