UFO Cuff - [Kandi Tutorial] | @GingerCandE

Подписаться 39 тыс.

Просмотров 80 тыс.

50% 1

How to make an kandi UFO cuff. This is a pretty simple 3D Kandi Cuff. I hope you enjoy!
----------------------------------------------
NEW MERCH!
----------------------------------------------
www.gingercande...
teespring.com/...
----------------------------------------------
Connect with the kandi community
----------------------------------------------
Kandi Land Facebook Group:
/ kandy.land
Kandi Land Discord:
/ discord
r/Kandi:
/ kandi
----------------------------------------------
Kandi Supplies
----------------------------------------------
Neon Pony Beads:
amzn.to/39bpKRE
White Medium Elastic Cord, 100 Yard:
amzn.to/3acKjP1
My recommend supplies for any project:
amzn.com/w/2RU...
-----------------------------------------------
What You Missed
-----------------------------------------------
• Crown Cuff - [Kandi Tu...
----------------------------------------------
Check Out The Playlist
----------------------------------------------
• Kandi Cuff Tutorials
----------------------------------------------
Support My Bead Addiction
----------------------------------------------
/ gingercande
---------------------------
Save Money Use My Code
---------------------------
Use promo code GingerCandE to receive 10% off your TOTAL order at:
www.iheartraves...
www.emazingligh...
www.glofx.com
--------------------------
About Me
--------------------------
Kandi Guru - Raver - Vlogger
Hello my name is Ginger and I'm an energetic kandi kid from Houston, Texas who now resides in Dayton, Ohio. I make kandi tutorials and rave advice videos every week.
Want to learn more about #kandi, #EDM, and #raves? Hit the subscribe button to get all of my new videos delivered directly to your homepage.
Thanks so much for watching and subscribing!
----------------------------------------------
Subscribe For More Videos
----------------------------------------------
goo.gl/XFy6Yy
--------------------------
Website
--------------------------
www.gingercande...
--------------------------
Find Me Online
--------------------------
- Facebook: / likegingercande
- Twitter: / gingercande
- Instagram: / gingercande
- Tumblr: / gingercande
- Pinterest: / gingercande
-----------------------------------------------
Join The Kandi Community Newsletter
-----------------------------------------------
eepurl.com/ch7-dP
--------------------------------
My RU-vid Setup
--------------------------------
amzn.com/w/23U...
-----------------------------------------------------------------------
Support The Channel Via Amazon Shopping
-----------------------------------------------------------------------
www.amazon.com/...

Опубликовано:

19 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 105

@adamcg1112 Год назад

These are awesome. Saving them so I can sit down and make Kandies while camping at lost lands!

@GingerCandE Год назад

I'll be there. We're having a kandi meetup at 2pm on Saturday in the Village Marketplace.

@Claire-po5cx 3 года назад

This was so much easier than it looked, thank you for making this!

@CaptainCuppycakes 4 года назад

Thank you for posting !! Ive been wondering how to make these for so damn long 😭😭😭😭

@goldfishcracker44 2 года назад

Just used up all my pink beads but it looks amazing

@alexandrasummersjohnson4062 3 года назад

this was very fun and easy to do it was a bit confusing when i didnt know where to pull the string to start a new part but i figured it out. these always look so cool when i see them and im glad i could finally make one!!

@tizzyswank1545 Год назад

First of these are the quickest, cutest little cuffs to make!!! So easy to customize as well. Was able to finish one within an hour despite a few set backs. Towards the second half of crosses I swear I wasn’t able to follow along but I just needed to trust u. 😂

@paigeb7002 Год назад

you’re the GOAT thank u! followed someone else’s tutorial who was going too fast and making it hella complicated this was soo easy to follow!!! I appreciate u!

@oliveslays 2 года назад

this is so cool X3! i used your colors and i love it! totally reminds me of a minecraft creeper ^_^

@KaisKreations 3 месяца назад

Omg it does look like a creeper! NOW I LOVE IT EVEN MORE! (Creepers are my fav mobs)

@OpossumYT 2 года назад

i’m getting monster energy vibes and i’m loving it

@megrogillio6116 3 года назад

thank you! ive been wanting to make one forever since im still in quarantine ._.

@billiebaldwin8554 2 года назад

I made the coolest cuff! Could not have done it without your awesome tutorial! Thank you!!

@talen675 4 года назад

omg im so doing this

@gabrielladowns398 3 года назад

I just made this but without the special beads at the end I had a lot of fun

@ecobiologist3232 3 года назад

I had to use different beads for the end but it still turned out great ❤

@AJ-Bunny- 4 года назад

After you formed the points along the middle, it looks like you went back to the top of the cuff. Did you?

@GingerCandE 4 года назад

Yes. just tie a peice of string to the top row. Or you can string back through other beads to get to the same place if you don't want to cut your string.

@paulajohnson2940 2 года назад

Loved making this... And love how it turned out. Thanx so much!!!! ❤️❤️❤️❤️❤️

@picabowinn 2 года назад

Bless you for making this so simple 🥺

@cantaloupix9753 3 года назад

I made my first UFO cuff with this tutorial and it turned out amazing! Alll your videos are so easy to understand!

@BubbleDraws211 Год назад

Thank you so much! I love this! It was a little bit difficult to follow 😅 but I figured it out 👍🏼

@squin6959 Год назад

I made a very colourful one of these for my friend! Thanks for the tutorial :’ )

@sashadmonjaras8950 4 года назад

love it

@Lita-Likes-Kandi Месяц назад

Thanks! This was really helpful!

@woopidoopie8169 3 года назад

OMG I love anything alien or horror so I am so making this :0

@sam-fk7qc 4 года назад

does it have to be 30 beads? i love your videos sm theyre so helpful

@GingerCandE 4 года назад

No you can use whatever size you like for the x cuff. It shouldn't change the structure for this cuff.

@tunastudios9234 2 месяца назад

I love your videos and tutorials, could you be a but more clear with steps next tine? I had to guess some of them. Thanks for another great video!

@albarrankarla8204 4 года назад

I love ur videos❤ I watch you from México 🥰

@misskitten8510 2 года назад

Such a quick and to the point tutorial. Thanks so much, it was so easy to follow!

@foxtails-mw8dp 2 года назад

This is so easy! Thank you!

@leech_0349 3 года назад

Your videos are very very helpful!

@GingerCandE 3 года назад

I'm so glad you like them 😊

@fishyjell 3 года назад

im kinda confused about the bit at 1:30

@GingerCandE 3 года назад

We are making a V pattern by zig zagging through our connector beads. Add 3 beads, string through the middle point, add 3 beads string up to our connector bead.

@punkauto Месяц назад

@@GingerCandEhi! when i'm looking at your cuff compared to mine, at the end ur string is at a higher point than mine, ive spent 5 minutes trying to figure out, do i string through beads then add on 3 beads or just see how it goes

@GingerCandE Месяц назад

@punkauto I took my string and went through a few beads in the cuff until I reached the top and was coming out of one of the green accent beads. I just realized the clip is edited out. 🫣 sorry

@mrs.hackershistory1756 3 года назад

Just finished mine using this tutorial!!

@no1stinkysmoocher 7 месяцев назад

does it have to be 30 beads? my wrist is like 26 beads i think and it definitely won't fit me:(

@GingerCandE 7 месяцев назад

You can decrease is by 3 beads. So 27 as the base.

@no1stinkysmoocher 7 месяцев назад

@@GingerCandE okay thanks!

@rileyprice5974 4 года назад

How can I add a perler bead piece onto the cuff?

@GingerCandE 4 года назад

I like to loop the string around the last layer with the specialty beads. I usually use at least 2 places to tie it off.

@dariakowalski6748 3 года назад

I started making kandi around almost 2 months ago and I’m pretty good at making most base cuffs (peyote, multi stitch, 3d, x stitch) do any of you have a favorite cuff or thing to make out of kandi? If so tell me I want more ideas!

@GingerCandE 3 года назад

I like singles or small bracelets 🥰

@LoveBxnny 2 года назад

my favorite thing to make is probably a rotator cuff (i have only been doing kandi for a couple weeks so this is my favorite thing to make so far)

@crysaio 2 года назад

love this!

@dustinbustin 4 года назад

how do u tie the knot.into the needle?? I'm sorry I'm just confused on that part

@GingerCandE 4 года назад

I just double knot it.

@SourPatchChildren 11 месяцев назад

Thanks so much im so happy!

@stella685 2 года назад

This was so fun to make but I have one question how do I tye it at the end

@Ela-yu4om 3 года назад

OMG !! tysm this was so helpful :D

@DORITOBUNNYXD 8 месяцев назад

Future me is it easy?

@GingerCandE 8 месяцев назад

I hope so 😋

@mariocheezwhiz4023 3 года назад

I just made one and it’s so cute ! I’m totally going to make more !!! :D

@ves6833 3 года назад

instead of pony beads, seed beads arrived if i follow te tutorial but with them will it work?

@GingerCandE 3 года назад

You would have to adjust for size since the beads are smaller.

@possumlino 3 года назад

this is sick , how many beads does it take?

@GingerCandE 3 года назад

A lot. 😂 I'm not entirely sure.

@kristenninonuevo6296 2 года назад

Hi there, I’ve started making cuffs and I’m so in love!! I was just wondering, what needle do you use to thread the beads? Thank you so much!

@GingerCandE 2 года назад

1mm fabric covered elastic. Plastic needle.

@kristenninonuevo6296 2 года назад

@@GingerCandE thank you so much, I appreciate it!

@vio.matthews 3 года назад

I miss your tutorials!! when will u be coming back to yt?

@GingerCandE 3 года назад

I am currently posting on TikTok. After July I will have more free time available.

@vio.matthews 3 года назад

@@GingerCandE oh cool!!!!!! I'll def follow u

@lochness4853 3 года назад

Can you add perlers to this? I'm sorry if this is dumb, but this'll be my first 3D cuff!

@GingerCandE 3 года назад

You can add anything your heart desires.

@RoeBonebrake 6 месяцев назад

Do you need the smaller beads or could i just use star beads?

@GingerCandE 6 месяцев назад

No stars would work

@chloetaylor6258 3 года назад

I've watched so many tutorials on how to make cuffs, but I have such a awful time trying to make the x bace. Is there a easier way to make the x bace? ( I'm sorry if this question is dumb)

@GingerCandE 3 года назад

I have a tutorial on how to make it. If you search X-base cuff and gingercande it should pop up

@chloetaylor6258 3 года назад

@@GingerCandE Thank you!

@ko4rental835 3 года назад

i know im suuuuper late but i always love turbo beads tutorials!! they go super in depth on everything and are very easy to follow

@yungbluds_bae 3 года назад

I’m still confused but it helped a lot!

@GLITCHY_POP 2 месяца назад

How did u go back up to the top did u js string it thro the x’s or?

@GingerCandE 2 месяца назад

Yes

@GLITCHY_POP 2 месяца назад

@@GingerCandE ok Ty ^^

@pastelkyrandom2783 3 года назад

how many connecter beads long does the x base have to be?(like- how big is the bracelet) is there a certain number so that the middles all line up?

@paigemorris6078 3 года назад

2 x high!

@scubble1796 3 года назад

I’m confused on the part at 2:08 can you explain how to string it more thoroughly in a comment?

@xxcrayon.eater_ 3 года назад

This is possible to do with just 1x tall cuff? Or does it HAVE to be 2x?

@xxcrayon.eater_ 3 года назад

Nvm I'm doing it with 1x 😈😈

@GingerCandE 3 года назад

😂 Let me know how it goes!

@xx_lunar_tears_xx8432 3 года назад

How did it go?

@darlademo-shaffer Год назад

i modified mine in the strangest way possible

@GingerCandE Год назад

We love strange kandi here 👽

@SMUDGESEASON 3 года назад

do you have to use those bigger and smaller beads? or could you just use kandi beads

@GingerCandE 3 года назад

, No you do not. Use any bead you like.

@26stakks 3 года назад

How did you tie it off? Also love you vids

@GingerCandE 3 года назад

Put the string in between 2 beads. This makes a loop. Put the end of the string into the loop and pull tightly. Repeat a few times.

@26stakks 3 года назад

@@GingerCandE ok thx’s!

@JayJay44555 24 дня назад

Bru why can’t they make the first part in the same videooo

@expiredlemons 3 года назад

where do i tie off the spikes at the first part?? i’m so confused and i’ve had an unfinished UFO cuff just sitting in my room for about a week now.

@GingerCandE 3 года назад

Anywhere you think it needs a knot. I tie mine usually at the end of a row.

@expiredlemons 3 года назад

@@GingerCandE thank you!! i figured it out today!! sorry if i sounded a bit salty 😅😅

@ppluvers1234 3 года назад

1:45

@morningstar9207 3 года назад

Does this work on a thinner x-base cuff?

@GingerCandE 3 года назад

@winkslife9806 Месяц назад

I already cutt my my string cuz didn’t teach the first part

@GingerCandE 22 дня назад

Just tie it back on 😊

@bones1026 3 года назад

im almost finished but i ran out of beads :(

@GingerCandE 3 года назад

Oh no that's the worst. You can always add a clothes pin to the end of the string until you get more.

@Eat_Soup_ Год назад

Too fast and confusing

@GoblinOfTheForest 4 месяца назад

Fr! I just made what I could do and made my own kind!