Тёмный

ULTIMATE Jon Boat REVEAL and WALK-THROUGH {Jon Boat To Bass Boat Conversion} Lowe 1448 

Bass Brothers Fishing DMV
Подписаться 21 тыс.
Просмотров 54 тыс.
50% 1

IT'S TIME!!! The jon boat to bass boat conversion is complete and being revealed to you. You've been asking and here it is. After over four months of blood, sweat and tears it's complete the aluminum framing, rod locker, jon boat electronics, decking, hatches, carpeting, the whole works. Special thanks to my family and all of you for riding with me throughout this entire build. I have a more videos coming out of mods to this boat. I will release those after this. You asked, here it is. ENJOY!!!
Tap that like button and subscribe to our channel to stay up to date for future videos
Check us out on Instagram: / bass_brothers_fishing
If you missed any of the previous videos on this conversion, please click this link to get caught up.
-FULL Jon Boat Conversion Playlist: • Jon Boat Conversion
Jon Boat Build Materials:
EZ-Troll Recessed Tray: amzn.to/3eLCKjL
Carpet 16 oz: amzn.to/3eN6Tzj
Bilge Pump: amzn.to/31K9Due
Sea Sense Bilge Pump Kit: amzn.to/3dYtkRp
InLine Fuse: amzn.to/3dZCihc
Better Solder Connectors by Haisstronica: amzn.to/2ZwcG6y
Teks Self Drilling Screws for panels: www.homedepot....
120PCS Heat Shrink Solder Connectors: amzn.to/2ZeaEIj
Terminal 150 Set: www.harborfrei...
Rubber Grommets 180 Set: www.harborfrei...
Battery Terminals: amzn.to/2Nj9J3F
Titanium Coated High Speed Steel Step Bit Set, 2 Pc: www.harborfrei...
Blue Sea Systems Common BusBars 150a, 4 stud w/cover: amzn.to/2Yn6hLz
Blue Sea Systems Common BusBars 150a, 10 stud w/cover: amzn.to/31drOs9
Blue Sea Systems ST Blade ATO/ATC Fuse Blocks: amzn.to/2YpFxKs
Blue Sea Systems WeatherDeck SPST/On-Off Toggle Switch: amzn.to/3e441ON
Terminal Ring Connector 5/16 Inch 16/14 Gauge 100 Pack Blue - BVRT516: amzn.to/37WQq9F
LED Lights: amzn.to/2Z0Wie8
Marine Outdoor Bass/Pontoon Boat Carpet/16 oz (Midnight, 6'x30')amzn.to/37RqAUF
Solder Seal 14 AWG Wire Connectors: amzn.to/2Ayl0KM
Shrink Tubing: amzn.to/37Hx6gz
Ancor Marine Grade 14 AWG Wire: amzn.to/2USyXtJ
6/2 AWG Duplex Tinned Marine Wire, Red/Black 25 Feet for Trolling Motor: amzn.to/2ARZIYJ
8 gauge wire for battery to tun electronics(25 Foot, 8/2 AWG Duplex Red/Black): amzn.to/3fGBmQi
ALEMIN battery terminal cover 12x20mm- 20PCS: amzn.to/383V321
Attwood 7623-7 Compact 50-Amp Marine Boat 12V/24V Circuit Breaker, metal: amzn.to/3ex8wlm
NOCO GCP1 15 Amp 125V AC Port Plug Power Inlet with 16-Inch Integrated Extension Cord: amzn.to/312msjg
Liquid Tape: amzn.to/3dlp3Hn
Gorilla Tape (To Secure LED Lights): amzn.to/3dCeiAJ
Heat Gun: amzn.to/3fwUa4e
3M Marine Adhesive 5200(THE GOOD STUFF): amzn.to/2zEqkMc
Rod Grommets: www.boatoutfit...
Rod Tubes (Front) 1 - 1/2 inch www.homedepot....
Rod Tubes (Rear) 1 - 1/4 inch www.homedepot....
Hole Saw (Front): amzn.to/2LyRkPv
Hole Saw (Rear): amzn.to/2zJMpsc
Carpet Glue: www.lowes.com/...
Foam used in My Boat: www.homedepot....
Arrow One Hand Rivet Gun: amzn.to/2xuOPtE
Harbor Freight Rivet Gun: www.harborfrei...
Rivets Aluminum 1/8-Inch 100-Pack: amzn.to/2L7lg8Q
4-1/2 in. 4.3 Amp Angle Grinder: amzn.to/2UJDhup
DEWALT Cutting Wheel, General Purpose Metal Cutting, 4-1/2-Inch, 5-Pack: amzn.to/2JqJvdn
Swanson Tool T0701 12-Inch Speedlite Square Layout Tool (Structural Foam Plastic Orange): amzn.to/3h32NoV
Empire Level E2994 7-Inch High Definition Rafter Square: amzn.to/2JlcBLr
Empire Level e1190 16-Inch by 24-Inch Professional Framing Square, Blue or Black Anodized Aluminum: amzn.to/2vXsZhY
Ratcheting Bar Clamp 6 inch: www.harborfrei...
Amazon affiliate links help to support the channel. You won't see a difference and it's the same products. Thanks for supporting our channel.
#jonboat #jonboatconversion #bassbrothersfishingdmv

Опубликовано:

 

28 сен 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 384   
@parkernichols2263
@parkernichols2263 4 года назад
Best bass boat to jon boat build I have ever seen! And thats saying allot.
@BassBrothersFishingDMV
@BassBrothersFishingDMV 4 года назад
Thanks Parker. Appreciate the feedback. It was a tough one but I learned allot from others and by making mistakes along the way too lol.
@WitchDRofKabul
@WitchDRofKabul 2 года назад
Dude, you seam like such a wholesome guy. God bless you and thank you.
@BassBrothersFishingDMV
@BassBrothersFishingDMV 2 года назад
Thanks Johnny. Appreciate the comment. God bless you too!!!
@joshotey2967
@joshotey2967 3 года назад
Excellent build my man! Just got a 16x48, and you've got my wheels spinning! Unfortunately my dad will not be here to fish with me. The rona took him out on February 16th of this year. That's who I got the boat from. He was in the middle of getting it set up and it breaks my heart he's not going to get to finish it and go fishing in it. Got a brand new 30hp Tohatsu on it too, which isn't even broke in yet. I helped him customize the side console for it. We've fished together my whole life, and I'm 41. Not going to be the same without him, that's for sure. Anyhow, I'm enjoying your channel and wish you nothing but success. Cheers and tight lines!
@BassBrothersFishingDMV
@BassBrothersFishingDMV 3 года назад
Sorry for your loss. Losing a parent is very tough. Unfortunately I know from experience. Sounds like he left you an awesome boat and project that you can dedicate to him. Good luck and stay safe.
@fishingwithjett5373
@fishingwithjett5373 4 года назад
Truly Blessed for sho to get all the support you need to make such a nice looking boat. Looking forward to all future videos on Rona.
@BassBrothersFishingDMV
@BassBrothersFishingDMV 4 года назад
Thanks Arjectrick.
@laloromero6860
@laloromero6860 3 года назад
I watch your full build video and what an amazing job you did! I especially liked how detailed you got on certain areas that I can imagine myself having questions about. I want to add a casting deck with a locker or two and your videos have given me the courage to try. Thank you so much and happy fishing sir!
@BassBrothersFishingDMV
@BassBrothersFishingDMV 3 года назад
That's awesome Lalo. Just take your time, think it through and have fun. Good luck and tight lines!!!
@schoon3303
@schoon3303 2 года назад
Nice setup and work. I’ll be referencing this vid when I do mine. Thanks for sharing it!
@thomasbendowski2226
@thomasbendowski2226 3 года назад
Beautifully done! A lot of attention to detail! One thing to keep in mind, which you probably already have, but your nav lights will need to be visible from the side too. Kudos!
@BassBrothersFishingDMV
@BassBrothersFishingDMV 3 года назад
Thanks. I actually added a pole light since the build just to play it safe.
@tony1438
@tony1438 4 года назад
This is one of the CLEANEST and well thought out boats I’ve seen. Very very well done, quality and not rushed. I am going to build mine of your template. Excellent design and attention to detail.
@BassBrothersFishingDMV
@BassBrothersFishingDMV 4 года назад
Thanks Tony. Take your time and enjoy the process. Looking back now I'm glad I didn't rush and fishing from it feels crazy rewarding.
@richardallain6277
@richardallain6277 4 года назад
That is awesome, my friend! I have followed this build from day 1. This build has been uplifting and inspirational to me, especially during these trying times. Thank you so much for showing us how to,persevere and succeed with grace and dignity. I will retire in a few years and my wife and I plan to buy a house on a lake. I now have her convinced that I need to build a tiny boat...lol. I hope to show you my boat build in a few years. Thanks so much for the ride!, I look forward to Rona 2.0 videos and especially the seeing you and your brother break in the boat! Stay safe, stay healthy, god bless.
@BassBrothersFishingDMV
@BassBrothersFishingDMV 4 года назад
Thanks Richard. I'm very excited for you. Look forward to seeing your boat build when you finish it. Thanks for being a part of this journey from day 1. It's been an awesome experience. Oh, house on a lake for retirement sounds amazing. Lake house and boat, what more could you ask for :).
@ianyokoro8925
@ianyokoro8925 4 года назад
Oh sh*t, that's a dope ride! Pat yourself on the back man, it's a high quality conversion! Love all the bells & whistles! Better take the wife fishing for all the sacrifices!
@BassBrothersFishingDMV
@BassBrothersFishingDMV 4 года назад
You got that right Ian. She held things down so I could live in the garage for the last 4 months and build this boat lol. Ill definitely be taking her out soon.
@tysontomko
@tysontomko 3 года назад
Carpet looks really clean bro, well done -- (from a fellow Pelican Bass Raider owner)
@BassBrothersFishingDMV
@BassBrothersFishingDMV 3 года назад
Thanks man. Appreciate the feedback. Pelican Bass Raiders rule 👊🏾😃
@lukekennedy8377
@lukekennedy8377 4 года назад
I’m so happy for you! You and your family should have a great time on that boat! Nothing’s better than something you made!
@BassBrothersFishingDMV
@BassBrothersFishingDMV 4 года назад
Absolutely. Took two of my Son's out today and we had a blast. The boat held up nicely too.
@deguzzy
@deguzzy 3 года назад
That is one amazing boat! Love the details and craftsmanship. Great video 🤙🏽
@BassBrothersFishingDMV
@BassBrothersFishingDMV 3 года назад
Thanks Dennis. Appreciate the feedback. 🤙🏾👍🏾👍🏾
@spirited_angler
@spirited_angler 4 года назад
Glad to see the Boat Reveal. Its nice, I've watched from start to finish...Looks great.
@BassBrothersFishingDMV
@BassBrothersFishingDMV 4 года назад
Appreciate you man. I'm glad it came out this good considering its my first build.
@anthony7486
@anthony7486 3 года назад
Great videos. I just started my build! I have a 15' Grumman jon boat that's been sitting in my backyard for 7 years doing nothing... I started today rebuilding the transom. I used blue deamon weld rods to fix some tiny holes and the flame went thru the holes enough to ignite the transom and smolder a nice fire lol! That sparked the transom rebuild, pun intended. It was rotten anyway so kind of glad that happened. Ne way, thanks for the inspiration! on to framing, decking, swearing, drinking, mathing, cutting, more swearing, more drinking, and hopefully some fishing lol.
@ericreinhardt115
@ericreinhardt115 3 года назад
Very nice job! I’m glad you were able to complete this project and stayed married. You give me hope! Outstanding!
@BassBrothersFishingDMV
@BassBrothersFishingDMV 3 года назад
Amen to that!!!
@WeaponStencils
@WeaponStencils 3 года назад
Brother, these videos are hands down, the best on YT. Just got gifted a 1232 blank hull and I'll be using so many of your ideas. Excellent detail, commentary and editing. Keep em coming!!
@BassBrothersFishingDMV
@BassBrothersFishingDMV 3 года назад
Thanks👍🏾🤙🏾
@daviddowd3764
@daviddowd3764 4 года назад
Congratulations man, you have done an excellent job, love it! Have fun, enjoy life and be safe!
@BassBrothersFishingDMV
@BassBrothersFishingDMV 4 года назад
Thanks David. You too man. Live life to the fullest. Tomorrow is not promised.
@tedondrish9204
@tedondrish9204 4 года назад
Fantastic, you're a master at this, it's gonna be fun.
@BassBrothersFishingDMV
@BassBrothersFishingDMV 4 года назад
Wish I was Ted. Thanks for the compliment though. Learned allot. It's going to be a fun boat to fish from. Thanks for being a part of this epic journey. More to come.
@Unk-Dre
@Unk-Dre 2 года назад
This is truly a blessing from God that I came across your channel. I want to salute you @BassBrothersFishing DMV from your fellow DMV brother. You are sharp with your building skills, I'm here to learn and take notes. Your newest subscriber.
@BassBrothersFishingDMV
@BassBrothersFishingDMV 2 года назад
Welcome to our channel my dude. Glad you like the series.
@oliverjohnston1313
@oliverjohnston1313 2 года назад
Super cool and clean build I watched some of your vids and it inspired me to buy my alumacraft John boat I’ve been watching RU-vid for a while this is probably my first comment I’ve made on RU-vid but I thought it was worth it because I can’t even imagine how long and hard it must’ve been to achieve this goal nice work and I hope you have fun on your boat. 🙂
@joshsheinis5968
@joshsheinis5968 3 года назад
WOW WOW WOW just wow, what an amazing professional build. I am in the process of purchasing the same boat and would love to do something similar to this. Although I do not think I can pull something off quite as nice haha
@BassBrothersFishingDMV
@BassBrothersFishingDMV 3 года назад
Thanks. Give it a shot. You'll be surprised what you can get done.
@doomgrim7
@doomgrim7 3 года назад
Awesome im doing a lowe 1440 rite now. Thanks for all the idea's. Dude I hope you catch so many fish god bless you. I told my wife she could lay on the front deck and get some Sun. That's how im able to build my boat deck. Your a good man.
@BassBrothersFishingDMV
@BassBrothersFishingDMV 3 года назад
Thanks man. Appreciate the kind words. Good luck with your build. Build your wife a nice comfortable deck so you can get more fishing time in 😜
@BeerBourbonBaits
@BeerBourbonBaits 4 года назад
Awesome!!! Glad to see some fish in the boat. Congratulations on getting her to this point. Also, your editing game is always improving. Keep crushing ‘em! 💪
@BassBrothersFishingDMV
@BassBrothersFishingDMV 4 года назад
Thanks Kwyantis.
@dalebaldwin9727
@dalebaldwin9727 4 года назад
Very nice, you did a great job.👍
@BassBrothersFishingDMV
@BassBrothersFishingDMV 4 года назад
Thanks Dale.
@stevendoan4676
@stevendoan4676 4 года назад
This is great my man. All of the work has finally paid off!!
@BassBrothersFishingDMV
@BassBrothersFishingDMV 4 года назад
It feels great.
@johnschmauder5132
@johnschmauder5132 4 года назад
And the student becomes the master!!
@BassBrothersFishingDMV
@BassBrothersFishingDMV 4 года назад
Call me Luke lol.... It's been a great process. Glad I didn't put any holes in the hull of the boat along the way lol... Thanks for being a part of this.
@ReelRigged
@ReelRigged 4 года назад
Amazing editing in that inro. And I LOVE the name. Cant wait to see it on the water.
@BassBrothersFishingDMV
@BassBrothersFishingDMV 4 года назад
Thanks District Bass'n. Now I can get into that Potomac River action!!!! :)
@halspeed12
@halspeed12 3 года назад
Just ran across this video looks like a great build will be going back and watching the full build now
@BassBrothersFishingDMV
@BassBrothersFishingDMV 3 года назад
Awesome. Its a pretty cool build. Thanks for watching. 👍🏾🤙🏾
@jorgen.zamora
@jorgen.zamora 3 года назад
This is soooo inspiring! Thank you for sharing! I don't have budget for even a small aluminum boat, but I'm about to build my first wooden jonboat. And your video sure gives me inspiration!
@BassBrothersFishingDMV
@BassBrothersFishingDMV 3 года назад
Sounds awesome. Good luck with your build. 👍🏾🤙🏾
@jorgen.zamora
@jorgen.zamora 3 года назад
@@BassBrothersFishingDMV thank you very much!
@johnnielarge5506
@johnnielarge5506 3 года назад
I found your videos due to I’m going to add lights to my boat they I just bought and your build is impressive. 👍
@BassBrothersFishingDMV
@BassBrothersFishingDMV 3 года назад
Thanks Johnnie.
@XPGreatScottXP
@XPGreatScottXP 4 года назад
Dang man! Looks good, literally ran across your video a day ago when you first started. Sad I didn’t get to follow progress, but now I can view and know what an amazing boat is waiting at the end.
@BassBrothersFishingDMV
@BassBrothersFishingDMV 4 года назад
Thanks. Welcome to the channel. It was a great build. Glad you don't mind knowing the ending of a movie when you watch it lol.
@Chris-un8ge
@Chris-un8ge 3 года назад
Best boat build ever. Thanks for the ideas Killer boat
@BassBrothersFishingDMV
@BassBrothersFishingDMV 3 года назад
Thanks man. Much appreciated 🤙🏾👍🏾
@paul.aragon
@paul.aragon 3 года назад
Nice reveal. Looks like a rewarding project.
@BassBrothersFishingDMV
@BassBrothersFishingDMV 3 года назад
Yea man thanks.
@bmxking6582
@bmxking6582 2 года назад
Awesome build, super clean and a great layout!
@BassBrothersFishingDMV
@BassBrothersFishingDMV 2 года назад
Thanks 👍🏾🤙🏾
@barrychandler4486
@barrychandler4486 2 года назад
very nice. i see a few things i would change, like i would have kept the live well, another seat on the rear for my wife who fishes, and a little different in the rod locker. But i think it was probably more informative and in depth on how you did things. enjoy it. i want to do one just to do it
@jimwilkey7294
@jimwilkey7294 3 года назад
That’s right... I’m calling it Rhona! So damn funny 😄 Keep up the great work. Can’t wait to see the test with a 50hp 2 stroke mounted on the rear 👊🇺🇸
@BassBrothersFishingDMV
@BassBrothersFishingDMV 3 года назад
🤙🏾👍🏾
@mikemaze318
@mikemaze318 4 года назад
Congrats on the build! Looks great.
@BassBrothersFishingDMV
@BassBrothersFishingDMV 4 года назад
Thanks
@MrMackman00
@MrMackman00 Год назад
Excellent Job !!!!
@BassBrothersFishingDMV
@BassBrothersFishingDMV Год назад
Thanks
@w_dub_wilberforcejr
@w_dub_wilberforcejr 4 года назад
AWESOME job Cuz!!! Enjoyed watching.
@BassBrothersFishingDMV
@BassBrothersFishingDMV 4 года назад
Thanks Fam. Especially coming from a pro architect like yourself.
@charlesroulet9584
@charlesroulet9584 2 года назад
That is a great build. Thanks for sharing it.
@ShutterUp
@ShutterUp 4 года назад
Get that thing on the water man! Slime it up.
@BassBrothersFishingDMV
@BassBrothersFishingDMV 4 года назад
Yea man. Ready to goooooo!!!!!!!!
@markhuseman8631
@markhuseman8631 Год назад
You totally rocked this out. I have enjoye your videos and the way you go about it. You share your experience and lessons you learnt along the way. I am getting ready to start my 1648 and am going to go with the same set up you have. Do you have any videos with measurements on your hatches. Trying to get materials lined up before I jump in Keep up great work and solid content
@BassBrothersFishingDMV
@BassBrothersFishingDMV Год назад
Thanks. I do have hatch videos on the playlist. Check those out. Message me if its not there and i will measure them for you.
@gounc82
@gounc82 3 года назад
Awesome job! Super clean. I’m definitely going to be taking a lot of tips from these videos
@BassBrothersFishingDMV
@BassBrothersFishingDMV 3 года назад
Thanks 🤙🏾👍🏾
@frankwagner6020
@frankwagner6020 4 года назад
Great job on the build!! I’m in MD too, perhaps I’ll see ya out there sometime! Good fishin!
@BassBrothersFishingDMV
@BassBrothersFishingDMV 4 года назад
Thanks. Yepp. Say hi if you ever see us around. Tight lines.
@JMACEN23
@JMACEN23 4 года назад
Looks amazing man!! Can’t wait to see it on the water
@BassBrothersFishingDMV
@BassBrothersFishingDMV 4 года назад
Thanks. Vid coming soon. Stay tuned....
@kenbrown5449
@kenbrown5449 4 года назад
You should be very proud of yourself! Lot's of patience and skill is shown in your workmanship. That deck looks better than some $$$ Bass Boats! Now I've got to SUB. :)
@BassBrothersFishingDMV
@BassBrothersFishingDMV 4 года назад
Thanks Ken. Appreciate the support and feedback. Welcome to our channel.
@markfrye9885
@markfrye9885 2 года назад
Bro love how you started the video with it lit up
@BassBrothersFishingDMV
@BassBrothersFishingDMV 2 года назад
Thanks.
@hehazrisen3529
@hehazrisen3529 4 года назад
Absolutely wonderful, good job brother!!
@BassBrothersFishingDMV
@BassBrothersFishingDMV 4 года назад
Thanks man.
@EricF2030
@EricF2030 4 года назад
Great job!
@BassBrothersFishingDMV
@BassBrothersFishingDMV 4 года назад
Thanks!!!
@blangmade10
@blangmade10 3 года назад
Wow...you have me so inspired...Well Done !!!!
@BassBrothersFishingDMV
@BassBrothersFishingDMV 3 года назад
Thanks 🤙🏾👍🏾
@topfishingdeals7609
@topfishingdeals7609 4 года назад
Looks great!!!!
@BassBrothersFishingDMV
@BassBrothersFishingDMV 4 года назад
Thanks
@detectingthepnw968
@detectingthepnw968 3 года назад
I love boat man! Awesome job and looks fantastic!
@BassBrothersFishingDMV
@BassBrothersFishingDMV 3 года назад
Thanks man !!!
@Thecoolistever
@Thecoolistever 3 года назад
That came in very nice good job
@texstar77
@texstar77 3 года назад
Your wife is a definite Keeper! Now invest in flowers, gold, and diamonds! Her turn!! Great boat!
@BassBrothersFishingDMV
@BassBrothersFishingDMV 3 года назад
Lol. Thanks.
@VX_DJ
@VX_DJ 4 года назад
the boat looks great! Cant wait to see it on the water :)
@BassBrothersFishingDMV
@BassBrothersFishingDMV 4 года назад
Thanks. Coming soon!!!
@cassondratakemoto7185
@cassondratakemoto7185 2 года назад
Thank you for these videos. It definitely helps.
@BassBrothersFishingDMV
@BassBrothersFishingDMV 2 года назад
👍🏾
@krisbeasley6649
@krisbeasley6649 3 года назад
That is an amazing conversion!
@BassBrothersFishingDMV
@BassBrothersFishingDMV 3 года назад
Thanks.
@WitchDRofKabul
@WitchDRofKabul 2 года назад
Slickest build I've seen
@jaymacklin8303
@jaymacklin8303 4 года назад
Great job ! The lights up front are legal but the backs I dont think so ,it needs to be elevated above the boat.
@BassBrothersFishingDMV
@BassBrothersFishingDMV 4 года назад
Ok cool. Good to know. I'll confirm. I also heard the front needs to be a round light visible from multi angles. Thanks for the feedback.
@BlocknTackle52
@BlocknTackle52 2 года назад
Nice job!!
@philipmagula4620
@philipmagula4620 2 года назад
Wow Great Job!!! Super Clean!!!
@BassBrothersFishingDMV
@BassBrothersFishingDMV 2 года назад
Thanks
@appalachhaun_adventures
@appalachhaun_adventures 3 года назад
That looks real nice and impressive
@BassBrothersFishingDMV
@BassBrothersFishingDMV 3 года назад
Thanks 🤙🏾👍🏾
@chuckosborne5562
@chuckosborne5562 4 года назад
Great job. Workmanship is fantastic. Go get it wet!
@BassBrothersFishingDMV
@BassBrothersFishingDMV 4 года назад
Yessirrr!!!
@user-fy4cs2xf4k
@user-fy4cs2xf4k 4 года назад
Great build, well done.
@BassBrothersFishingDMV
@BassBrothersFishingDMV 4 года назад
Thanks
@TheDtrolinder
@TheDtrolinder 3 года назад
Awesome job !! Thanks for sharing your knowledge...
@BassBrothersFishingDMV
@BassBrothersFishingDMV 3 года назад
Thanks
@Delmarvafishing
@Delmarvafishing 4 года назад
Nice bro, it came out great I think my favorite part is the lights. I'm pretty sure that they are coast guard and DNR boating rules compliant.
@BassBrothersFishingDMV
@BassBrothersFishingDMV 4 года назад
Thanks man. Even if they're not. They still look cool lol. Hopefully DNR thinks so too 😜
@Delmarvafishing
@Delmarvafishing 4 года назад
@@BassBrothersFishingDMV www.boatingmag.com/navlightregs/#:~:text=Learn%20what%20type%20of%20navigation%20lighting%20is%20required%20on%20boats.&text=Powerboats%20under%2012%20meters%20(39.4,visible%20for%201%20nautical%20mile. Pretty sure as long as it is visible from a certain distance and covers a certain area its good
@jjohnston6645
@jjohnston6645 2 года назад
That is a very nice build.
@BassBrothersFishingDMV
@BassBrothersFishingDMV 2 года назад
Thanks
@joshuaguidry8332
@joshuaguidry8332 4 года назад
looks great! you need an all around white light for your stern. didnt see that you had anything other than the LED strips on the transom.
@BassBrothersFishingDMV
@BassBrothersFishingDMV 4 года назад
I'll be sure to get one once I'm ready to night fish which will prob be next year. Thanks for the info.
@joshuaguidry8332
@joshuaguidry8332 4 года назад
Bass Brothers Fishing DMV that is for your running lights. its needed for coast guard regulations to run before and after dark.
@outdooraadventures7911
@outdooraadventures7911 4 года назад
Good job. I’m currently working on mine
@BassBrothersFishingDMV
@BassBrothersFishingDMV 3 года назад
Thanks!!! Good luck on your build!!!
@dgalvan529
@dgalvan529 4 года назад
Great job it looks amazing!
@BassBrothersFishingDMV
@BassBrothersFishingDMV 4 года назад
Thanks
@diceman2004
@diceman2004 3 года назад
Nicely done man .
@BassBrothersFishingDMV
@BassBrothersFishingDMV 3 года назад
Thanks
@chrisbarber1020
@chrisbarber1020 3 года назад
Very cool awesome job man!!!
@BassBrothersFishingDMV
@BassBrothersFishingDMV 3 года назад
Thanks.
@michaelgonzalez8863
@michaelgonzalez8863 4 года назад
Sweet !
@BassBrothersFishingDMV
@BassBrothersFishingDMV 4 года назад
Thanks.
@timothyleger4385
@timothyleger4385 4 года назад
That boat came out 2 WICKED to put in the water now !! FRIGGIN AWESOME JOB BRUH !!👍👍👁👁👍👍😉😉😁✌ Now y'all mount that motor, and get on the water !!👁👁👍👍✌😁
@BassBrothersFishingDMV
@BassBrothersFishingDMV 4 года назад
Thanks Tim. I'm working on getting the gas motor setup. I'm ready to get that thing on the water. It's gonna be dope.
@brianadamson2702
@brianadamson2702 3 года назад
That is an awesome conversion. Just curious, what is a ballpark figure to convert a little Jon boat like this. I kayak fish now but interested in doing something like this.
@farmerjoebrown2189
@farmerjoebrown2189 2 года назад
Good job man. Thanks for the good info. I know the deal. Did the same thing with mine.
@BassBrothersFishingDMV
@BassBrothersFishingDMV 2 года назад
Sweet!!!
@2011jal
@2011jal 2 года назад
Still think this is one of the better builds on youtube. Have watched multiple times and used the rod locker idea you had. Quick question, what size fuel tank do you use with you mercury, and could you tell me the name brand? Everything I hear on reviews is that they swell up and they can be dangerous because of lack of venting. Thanks
@BassBrothersFishingDMV
@BassBrothersFishingDMV 2 года назад
Thanks. I use the 3 gallon tank that comes with the motor. Venting is important. I haven't had any problems with swelling but I don't leave my boat outside in the heat either. That could leave to tank swelling
@letseatshark
@letseatshark 4 года назад
Amazing Job!
@BassBrothersFishingDMV
@BassBrothersFishingDMV 4 года назад
Thanks.
@michaelgonzalez8863
@michaelgonzalez8863 4 года назад
Live would be cool ! I might miss it but I’m sure some one would ask a question I need
@BassBrothersFishingDMV
@BassBrothersFishingDMV 4 года назад
All good. You can still leave comments if you have any questions. Thanks for watching.
@kevinclements2969
@kevinclements2969 3 года назад
this is awesome boat man this kc bass in
@BassBrothersFishingDMV
@BassBrothersFishingDMV 3 года назад
Thanks
@canesfishingadventures1951
@canesfishingadventures1951 4 года назад
Great job bro
@BassBrothersFishingDMV
@BassBrothersFishingDMV 4 года назад
Thanks man!!!
@ricklovelace5344
@ricklovelace5344 3 года назад
Man you do super work god bless
@BassBrothersFishingDMV
@BassBrothersFishingDMV 3 года назад
Thanks Rick!!!👍🏾🤙🏾
@MadScientist407
@MadScientist407 4 года назад
Good job !!!
@BassBrothersFishingDMV
@BassBrothersFishingDMV 4 года назад
Thanks 🤙🏾👍🏾💯
@BrokeBackBob4559
@BrokeBackBob4559 11 месяцев назад
I would get rid of all the pour sponge and replace it with pink foam. It can be molded in layers. It won’t retain water like that pour sponge.
@BassBrothersFishingDMV
@BassBrothersFishingDMV 11 месяцев назад
Not a bad idea.
@troyturnage973
@troyturnage973 3 года назад
Did you keep up with total cost for the build when you did it last year? Obviously probably close to 50% more now. Great work start to finish!!!
@BassBrothersFishingDMV
@BassBrothersFishingDMV 3 года назад
I didn't completely keep up with the cost but a boat this size easily costs around $4k to build out.
@shannonletner5550
@shannonletner5550 3 года назад
Wow amazing 🤩 job 👍 thanks for all the vids estimate form start to finish?
@BassBrothersFishingDMV
@BassBrothersFishingDMV 3 года назад
Thanks 🤙🏾👍🏾
@Mattyehdams
@Mattyehdams Год назад
If you got caught in a big rain storm would the rain water get into the compartments?
@Deezy0619
@Deezy0619 4 года назад
Nice job! Just one seat? Where will your bother sit?
@BassBrothersFishingDMV
@BassBrothersFishingDMV 4 года назад
Yea just one seat for now. My brother actually sits on the back deck like its a seat. I may add another one later if it makes sense.
@rosiev5870
@rosiev5870 3 года назад
I wish there were more men like you
@BassBrothersFishingDMV
@BassBrothersFishingDMV 3 года назад
Thanks for the compliment 🤙🏾👍🏾
@dmvfishindeva5979
@dmvfishindeva5979 4 года назад
Nice!
@BassBrothersFishingDMV
@BassBrothersFishingDMV 4 года назад
Thanks DC DIVA. Appreciate you!!!
@rickbrown8865
@rickbrown8865 3 года назад
That is hot bruh!!!!
@BassBrothersFishingDMV
@BassBrothersFishingDMV 3 года назад
Thanks man!!!
@kevinclements2969
@kevinclements2969 3 года назад
i need help on my boat i love your set on you boat i have tracker 14 foot i want to make rode locker love you set man
@BassBrothersFishingDMV
@BassBrothersFishingDMV 3 года назад
🤙🏾👍🏾
@NordicPhoenix
@NordicPhoenix 3 года назад
Could you tell us how much this build cost start to finish. It would be awesome if you broke the cost down as well. Like how much the boat and trailer cost then how much the angled aluminum cost then the wood, motor,electronics etc..
@BassBrothersFishingDMV
@BassBrothersFishingDMV 3 года назад
Already in the works. I'll probably have that video done in the off season.
@vincentcolon7909
@vincentcolon7909 3 года назад
I like it 👌
@gioelizondo4715
@gioelizondo4715 2 года назад
Where do u get the piano hinges bro
@gewglesux
@gewglesux 4 года назад
Vertical Stern mounted light? Not required? I saw the rear mounted LEDS.. Otherwise you have done a brilliant job... Earned you a Sub.
@BassBrothersFishingDMV
@BassBrothersFishingDMV 4 года назад
I'm actually in the process of getting a vertical stern light as we speak. The LEDs just look cool 😁
@gewglesux
@gewglesux 4 года назад
@@BassBrothersFishingDMV The LEDs look way cool!!! When i did mine i got a too tall mast.. was fishing off the stern once and came in contact with the stern light.. nothing broke so bear that in mind! Also they attract bugs in the summer. I don't know what you do for a living, but if you're NOT an Engineer you should be.
@BassBrothersFishingDMV
@BassBrothersFishingDMV 4 года назад
@@gewglesux the biggest issue for me so far is not to bang the lights while using the boat. They are pretty cool and very bright but you have to be mindfully that they can easily be damaged if you're not careful.
@gewglesux
@gewglesux 4 года назад
@@BassBrothersFishingDMV Something to be mindful of! they do look great though.
@travisroberson7386
@travisroberson7386 5 месяцев назад
How much extra weight did all this add
@cherudwilkerson6384
@cherudwilkerson6384 2 года назад
This way cool. I have a Loews 1436. I'm looking for who can do the build for me. I'm in Richmond. Any suggestions
@BassBrothersFishingDMV
@BassBrothersFishingDMV 2 года назад
I can build it out for you if you can bring your boat up to MD. Send me a message in IG or FB or email me at bbfishing.dmv@gmail.com so we can talk about what you want done.
@tyler.westermier.fishing
@tyler.westermier.fishing 3 года назад
How much did the materials cost?
Далее
1648 REVEAL and FULL BUILD Walk Through
28:00
Просмотров 10 тыс.
Riveted 1436 Jon Boat: Pros and Cons
11:22
Просмотров 11 тыс.
Transforming My Jon Boat Into A Bass Boat!
9:36
Просмотров 69 тыс.