Ultimate LightBurn Rotary Setup Tutorial for Perfect Engravings

Подписаться 16 тыс.

Просмотров 17 тыс.

50% 1

In this comprehensive tutorial, I dive deep into the art of rotary engraving using LightBurn. If you're looking to achieve perfect engravings on cylindrical or spherical objects like bottles, tumblers, or rings, this video is your go-to guide.
What You'll Learn:
-The essentials of rotary engraving setup in LightBurn.
-Differences and applications of roller and chuck type rotaries.
-Step-by-step guide to calibrating 'mm per rotation'.
-How to accurately measure and input object diameters.
-Tips for aligning and securing different types of objects.
-Importance of test engravings for perfect results.
⏰ Timestamps:
00:00 - Introduction
00:28 - Key Settings To Note
00:44 - Rotary Settings Panel
01:15 - Chuck Type Rotary
02:01 - mm per rotation
03:31 - Aligning the rotary
04:32 - Testing Trick
05:04 - LightBurn Masterclass Course
05:28 - Roller Type Rotary
06:16 - Always Do
06:36 - Trick to engrave sloped surface
07:11 - Roller vs Chuck
🔗 LightBurn Masterclass Course: landing.mellowpine.com/lightb...
🔗Join our Facebook Group: groups/mellowpinelasers
🔗 Laser Engraving Glass Bottles: • Glass Bottle Laser Eng...
If you found this video helpful, remember to hit the like button and share your thoughts in the comments. Don't forget to subscribe for more laser-related content. Thanks for joining us, and stay tuned for more exciting laser projects ahead! 💡🚀
#MellowpineLasers #DIYAcrylicSigns #LaserCrafting #AcrylicSignTutorial #lightburn

Хобби

Опубликовано:

20 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 37

@achillecalabria-nf6wg 2 месяца назад

your the only person that explained the setting perfectly thank you so much.

@MobileMrManiac 25 дней назад

I got my first klaser just couple months ago... and everything I know is because if this guy and this channel. Thank you so much.

@tfwoodcraft 6 месяцев назад

Very helpful video in a very useful format. Thanks!!

@MellowpineLasers 6 месяцев назад

Glad you liked it. 😊

@brendonkauffman4962 26 дней назад

thank you for the video! big help, it is much appreciated!

@rcm9762 7 месяцев назад

Nice work Mellowpine

@MellowpineLasers 7 месяцев назад

Thank you for the appreciation 😊

@richfox1255 Месяц назад

Super helpful video! Just assembled and started running my new Atezr L2 24W with roller rotary and Lightburn. Newbie question 1: Any advice on how to properly set the Origin (current position? user? absolute?) so I can avoid crashing into the rails. Second question: how does Home work when the rotary is in use? Thanks so much.

@puce2401 5 месяцев назад

Super vidéo. Va beaucoup m'aider pour instaler mon chuck ycr 1 ortur. Merci

@MellowpineLasers 5 месяцев назад

Heureux que vous ayez trouvé la vidéo utile! 😊

@larrycolson7451 7 месяцев назад

Another great video my friend. I noticed at 7:24 you were etching the white coffee mug without anything sprayed on the mug and getting the black Mellowpine LOGO. Do you mind telling me your Speed/Pwr LPI settings for the black logo on the white mug?

@MellowpineLasers 7 месяцев назад

Thank you so much. I used white spray paint on a white coffee mug which is why you couldn't see the coating. I used 80% power at 65 mm/s and 254 LPI on my 20W diode.

@larrycolson7451 7 месяцев назад

@@MellowpineLasers Thank you sir! What did you have to use to remove the paint?

@MellowpineLasers 7 месяцев назад

I didn't let the paint dry for too long, some 10 minutes and engraved it. It came off with some paint thinner.

@user-yc9uk9ts8z 5 месяцев назад

Your video was very informative. Thanks I am new to engraving. I purchased a creality falcon2 22w. I'm trying to engrave a softball. I set-up the rotary laser. When I go to frame it doesn't frame the same as the test ln laser tool. Can you help? Thanks in advance

@MellowpineLasers 4 месяца назад

You should be able to calibrate your rotary using the steps in the video. But if your laser frames properly during the test and doesn't frame the same after you exit the rotary setup, then make sure you have Rotary Enabled in LightBurn after closing the Rotary Setup window.

@joelrggizmo1373 3 месяца назад

Can I use a Rotary from XTool and roller from XTool on the ORTUR laserMaster 3 OR laser pro 2 S2 I have the pigtail, but I'm not sure if it's compatible. Somebody gave me their X Tool rotary & Chuck . I just need to know if it's compatible it's a five pin connector, but only using 4 wires center pin is not being used between the five pins.

@MellowpineLasers 3 месяца назад

It should work. If it doesn't you would have to rewire the connectors and match the correct pairs. Shoot me an email at mail@mellowpine.com if you need any help.

@0vidchannel3 3 месяца назад

Will the laser power parameters be the same for different materials if using rotary setup?

@MellowpineLasers 3 месяца назад

More or less the same but it would be good if you could use low speed settings on rotary. Say you engrave at 40% and 20mm/s on a rotary you can lower it to 20% at 10 mm/s. High speed can produce jerky movement in some cases.

@MellowpineLasers 3 месяца назад

But you should try to keep a good balance or else your engraving time would be longer

@Aartisan 6 месяцев назад

Hi Sir , Can you please tell me which machine is best for bottle and steel

@MellowpineLasers 6 месяцев назад

For glass bottles a CO2 laser would be easier. However, if it is not a production environment you can make do with a diode laser. For steel, a fiber laser is the ideal choice but diode can put marks on steel as well. If it's coated metal, any laser can remove the coating to put your design on the material. You can choose any laser that has a rotary accessory support.

@Aartisan 6 месяцев назад

Sir , Greetings!! THANSK FOR THE REPLY. I plan to buy a sculpfun Pro Max S30 20 W with rotary. It can work please suggest.

@user-fs5qs6ke7y 4 месяца назад

Okay, so I just got my Longer Rotary roller in the main and lightburn won't allow the test or print. LaserGRBL does, however its not printing properly. Why can't Lightburn allow the rotary to be set as active (Enabled)?

@MellowpineLasers 4 месяца назад

Which laser machine are you using ?

@user-je3zt8di1w 6 месяцев назад

I've watched your video over and over and when I press start on my Lightburn app (Gwieke Cloud Pro 2), the red error light immediately turns on. I can't figure out what I'm doing wrong. Please help me troubleshoot :)

@MellowpineLasers 6 месяцев назад

Hi, Are you facing the issue only when using the rotary setup in LightBurn or do you face the same issue in the Gweike Cloud software as well?

@brandonvarner8475 3 месяца назад

I have my rotary connected to my laser but when I got to the rotary setup it wont let me click the ok button or the test button. Do you have any ideas or pointers you are able to give me?

@MellowpineLasers 3 месяца назад

What laser and rotary are you using?

@brandonvarner8475 3 месяца назад

I am using a TTS 55 pro 5.5 watt laser with a Creality rotary kit pro. @@MellowpineLasers

@brandonvarner8475 3 месяца назад

I am using a TTS 55 PRO 5.5 watt and i am using a Creality Rotary Kit Pro.@@MellowpineLasers

@MellowpineLasers 3 месяца назад

Of the top of my head, it might be because the wiring configuration is wrong.

@mathebys.akeret9097 2 месяца назад

My last letter looks different... why could it be?

@lovelaceanyormi8598 7 месяцев назад

I want to learn how to use lightbrun

@MellowpineLasers 7 месяцев назад

You can join my Lightburn Masterclass Course to learn everything about Lightburn and much more: landing.mellowpine.com/lightburn-masterclass-course?RU-vid&

@loriezweifel3364 2 месяца назад

Thank you, this helped a lot. Supper confused about “mirrored” images, turning on or off does not always help. Masking tape idea definitely s game changer!