Ultimate Wooting 60HE Mod Guide

Подписаться 378 тыс.

Просмотров 428 тыс.

50% 1

Check out the Fractal Design Meshify Lite case here! - bit.ly/meshifylite
👇 PULL IT DOWN FOR THE GOOD STUFF 👇
Finally getting under the hood of the Wooting 60HE. We're gonna talk best practices for the Lekker switch, swap it into a Tofu60 case, we'll talk stabilizers, case dampening, and how to get the best sound out of your keycaps.
✅TOFU60 CASE FROM KBDFANS - kbdfans.com/r?id=io0457
The OG Tofu60 has been discontinued, this is the new Tofu60 Redux
Updated Video Here - • *NEW* Tofu Redux Case ...
✅CHECK OUT SCOTT AT KEYBORED!
• Make the BEST sounding...
✅Check out the Wooting 60HE here (over a year later, this IS an affiliate link now)
wooting.io/wooting-60he/?part...
✅TOFU 60 CASE FROM MECHANICALKEYBOARDS.COM
mechanicalkeyboards.com/shop/...
*USE CODE BADSEEDTECH TO BE SAFE*
✅GMK GRAND PRIX KEYCAPS
novelkeys.com/badseedtech
✅WUQUE TITANIUM SWITCH PULLER
cannonkeys.com/?ref=badseedtech
✅LUBE SYRINGE / STEM HOLDER - KINETIC LABS
kineticlabs.store/badseedtech
✅GATERON OPENER
ZEAL PC - zealpc.net/badseedtech
✅O-RINGS (Silicone, 4mm x 1mm x 1.5mm)
geni.us/86VFy
✅ZIP N FIT FOAM LINER
amzn.to/3cVkjh4
✅BADSEED x SPACE FORGED CARBON DESK MAT
spaceholdings.net/products/ba...
CODE 'BADSEEDTECH' GETS 10% OFF YOUR ORDER
✅Private Discord (via Patreon) - / badseedtech
--------------------------------
Film Gear Used to Produce This Channel:
Main Cam - Sony a7S III - geni.us/7zixIi
B Cam - Sony a7 IV - geni.us/gAWzI
Main Broll Lens - Tamron 28-75mm F2.8 - geni.us/WYR0s
Macro Lens - Sigma 105mm F2.8 - geni.us/ZhcxH
Talking Head Lens - Sigma 24mm F1.4 - geni.us/ctDfoUt
Main Mic - Audio-Technica AT4053B - geni.us/nEknk
--------------------------------
Song - "Twin Peaks" - Gregory David
www.epidemicsound.com/referra...
*****************************
Follow me here:
Twitter - / badseedtech
Instagram - / badseedtech
*****************************
Chapters:
00:00 - 00:56 - Overview
00:57 - 04:29 - Switch Prep
04:30 - 05:02 - Stabilizer Prep
05:03 - 05:19 - North / South Facing
05:20 - 08:45 - Tofu 60 Mounting & Tests
08:46 - 10:02 - Plate Swap?
10:03 - 10:30 - SALVATION
10:31 - 10:51 - Cable Issues
10:52 - 12:38 - Conclusion
#wooting #60he #mod

Наука

Опубликовано:

10 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 436

@badseedtech 7 месяцев назад

See the most up-to-date version with the Alumaze cases, new plate options, and the new 60HE+ Module here - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-4bvLyb2HhrU.htmlsi=RKbtb_-z_K-4bgIL

@DoctorQcumber Год назад

This feels like a product from the future. I'm shocked it didn't take them years longer to start releasing modding-friendly versions of their keyboards

@manfromwuhan714 Год назад

Bro this is literally the same process as any other hot swap keyboard on the market (from $50-1000). Only thing different is the switches

@DoctorQcumber Год назад

@@manfromwuhan714 yeah, but there isn't another gaming keyboard manufacturer that allows this much room for modding their keyboard. And it also happens to be the best performing gaming keyboard? That's wild

@jherryleealcid5901 Год назад

You new to keyboards?

@Xoilen Год назад

@@DoctorQcumber simply calling it the best performing keyboard doesn’t do it justice in the slightest, it’s the only keyboard you can get joystick level control with and it’s instant reset on release of the key makes the keyboard 1000% more responsive than anything else you can get

@mysticqro950 Год назад

⁠@@manfromwuhan714nope. lol. Wooting is the first keyboard to offer rapid trigger and other features that benefit you in gaming. Most gaming prebuilts are trash. Name a better gaming keyboard than Wooting… I’ll wait Keep in mind, this is a keyboard directed towards GAMING. Nobody here is trying to buy this keyboard for its aesthetic and “sound”, like most of y’all build custom keyboards for.

@blayses3116 Год назад

I love how wooting is showing they are listening to the community! They’re trying to bring the best products out for gaming while not totally disgusting the custom enthusiasts

@MekaniQ Год назад

A keyboard that looks nice, and that has a super performance in gaming! This definitely caught up my attention, great job Wooting!

@giff74 Год назад

It's like you read my mind with the Tofu case! In my eyes it helps the Wooting go from a gamer specialty board to something I'd want to use everyday for WFH AND game with. Keep up the awesome work Brian!

@carlosvaras7976 Год назад

Your explaination style is one of the best on youtube or anywhere. You say what needs to be said, directly with no extra words and warn about what matters.

@REZY_ Год назад

Wooting showing actual interest in the community and taking in feedback. Love to see it, great vid as always bro 🔥

@jacksonjones7212 Год назад

Im only halfway through the video and it’s already the most informative video I’ve watched about keyboards, it showed me an amazing foam for keyboards, perfect set to deal with switches, and a line syringe. Thank you man I love this video.

@MoneyMunday Год назад

I've watched videos of yours here and there when I'm searching for a specific video, but after watching this one, I subscribed. The information provided is perfect for those of us who are excited and waiting to receive our 60HE's and want more information in anticipation of having our hands on it. That, plus the footage showing you gaming has a nice little highlight & the segue into the sponsored segment was perfect. I look forward to keeping up with your content.

@themainevnt3419 Год назад

Been rocking mine for about a month. Well worth the wait. Done some mods. Great company.

@xanderkarawia5437 Год назад

Love the content and the professionalism of each video!

@imFurbs Год назад

pre ordered mine yesterday. your review sold me. can't wait to try that rapid trigger setting.

@capo3671 Год назад

started to mod mine today I really loves what Wooting is doing here taking all the feedback they can to cater to its customers been loving my board and the modding is going quite well all we need is mouse company with Wootings work ethics life would be complete

@wires__ Год назад

The diligence you put into this video is insane. Wow, thank you

@rev8962 Год назад

Such an amazing video really well done you’re just surpassing your self in each video and keep getting better and better keep it up man so much love and support stay up!.

@badseedtech Год назад

Thanks so much!

@jamesburke3428 Год назад

Extremely well made and informative video. Thanks for the good work!

@badseedtech 10 месяцев назад

**UPDATE** The og Tofu60 has been discontinued, there is a new Tofu60 Redux shipping in Sept. Its a great case for the Wooting and you can check out the video on it here - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-jLhoW5R21_g.html

@TheRosanchez85 Год назад

I really appreciate your vids on this board. They were def the reason I pulled the trigger on the Wooting 60he…I am extremely stoked to get it and will be doing the tofu60 mods being tested around 7:18. Def gained a new sub 🙏🏽🤘🏽

@bregonwebb8921 Год назад

Thank you so much for experimenting for me so I don't have to. Mine comes in a couple of weeks and Im so excited, but didnt want to have to deal with experimenting over and over until I found what I like. I think I know exactly what Im going to do now. Thanks, king

@MrTitanFTW Год назад

Just went ahead and sent a pre-order through their site. Have been wanting an upgrade from my Anne Pro 2 for the last 3 years now, so much so that I've been debating making a custom board but this video convinced me otherwise. Can't wait to see what it's like in person. Exceptional video as always 👍

@brittishcoal Год назад

You're really killing it with this video.

@SLYtheartist Год назад

FINALLY got to actually use some of the info in this video! I've been waiting for so long to get my wooting and then had to wait even longer to case swap it and mod it. I'm mostly typiung this comment because I love the way this board sounds now and its so much better than before I modded it. Thanks!!!!!

@mr6291 Год назад

If you wrap the tape mod up along the sides of the PCB and plate (filling the gap between the two), you can get a clean sound and depending on layers even forgo case foam. I recommend some wheel balancing weights in the battery cavity of the Tofu case, tape mod as described and maybe a small bit of polyfill if needed.

@taner65th Год назад

ive been thinking of getting this board, now im def getting it. I like how you can customize the case (going for a tofu 60 case), and being able to lube the switch without losing the ability to change the actuation point. Might go for the 100% tho, Thanks for this awesome content

@MorTphyr 7 месяцев назад

Dud i remember watching this channel when it had like 12k, glad you blew up

@andisir Год назад

Love your content man, getting into keyboards and audio was a blast thanks to your vids.

@theleftperson Год назад

knew I had to watch this vid as soon as the notification came up

@mamorris23 Год назад

i was JUST looking at tofu60 cases and stupidfish foams for it. thanks for this video, you the goat!!!

@666thsense Год назад

i for one appreciate the last statement in this video and acknowledging the suggestion of the content. didn’t have to do that, but it’s a nice earnest addition.

@foulplay99 Год назад

mine arrived today, so far I really love it! And thanks to Mr Badseed my desk has this kbd, a schiit stack and a pair of DT1990 Pro's, all purchased with confidence. Many thanks 🙂

@techbyjared363 Год назад

The Lekker switches don't need to be swapped to south facing to avoid interference. Gateron has added a new fillet to their new molds (ever since the Oil Kings I think) which avoids north facing interference with Cherry profile keycaps, which the Lekker has. Just a heads up if you happen to see this.

@gojisna Год назад

nice to know. ive been seeing in the wooting discord we should flip the switches. thanks

@Wooting Год назад

Just want to confirm that this is true based on our tests, but since we don't own GMK caps, we do not have enough confidence to officially recommend it and it's more "flashy" and easy to understand as there are a lot of people that forgot the reason for south facing switches.,

@ericmiller24 10 месяцев назад

I test it myself, there is still a little interference with Cherry profile keycaps. But not very obvious.

@AceMusubi Год назад

New here, but the fact that I'm seeing good Wooting content from someone in a cool Roland shirt makes me glad to be alive. Gotta appreciate the algorithm, +sub

@badseedtech Год назад

Glad to have you!

@HoveKB Год назад

Great video man.

@uzoa Год назад

Glad I found this video, I just ordered my keyboard. I still don’t know Michael bout modding or lubing so this will help me out when it arrives.

@YukiiChanGames Год назад

Just bought the wooting, lube, a tofu 60% and Keycaps for the board today can’t wait for it to come in

@bobcobb158 Год назад

cannot wait to get my hands on this board

@ASTROSR4 Год назад

Late to comment but I just received my board and I have some recommendations for those who follow this guide. 1. Absolutely relube the stabilizers on this board, they seem like they are lubed well but they are not... I took mine apart to see how well they were lubed, and they had lube just in the wrong locations or there just wasn't enough. I recommend following Taehatypes video on lubing stabs! 2. CLIP the stabs they are not preclipped. 3.I went ahead and used a silicone mix to help with the sound of the board and it came out fantastic! You could also go with a foam mod kit from StupidFish they make a kit for a lot of cases and the Tofu 60 is one of them. 4. I also swapped my springs for the lighter 50gm springs, and I can say it may not be worth it the slightly heavier springs are just fine however if you like a lighter feel than go for it. All that said after following this guide and doing the above mods I can say my board sounds and feels soooooo much better. Give it a try and come back to tell me how your boards sound!

@Ladisdad Год назад

hey man, ty for tips. do you think the internals could fit in the bakeneko? I cant stand the tofu lol

@supSuicide Год назад

This will come in handy, cheers mate

@yllib2012 Год назад

You seriously improved the sound. I'd like to see this keyboard in a 65% with dedicated arrow keys. I'm not waiting and holding my breath for a 65%. I'll buy the 60% and be happy with it in a tofu case with a keycap swap.

@fredmeta 8 месяцев назад

Exact video I was looking for to kick off my custom build. Thanks, BadSeedTech, liked and subscribed.

@badseedtech 8 месяцев назад

Appreciate you! Got some new Wooting and KBD stuff coming up too

@rev8962 Год назад

Good morning it’s 9Am here and I shall watch this epic mod.

@Kaymen1980 Год назад

Thanks for the tips!

@Nyitemare Год назад

Always looking forward to a new Badseed vid :D just started training up for a WFH job, staving off the temptation for a new silent board build 😅for now

@looksrarekeyboards2994 Год назад

Awesome video as always

@badseedtech Год назад

Thanks man!

@K1LO_ Год назад

Damn Brian that actually sounds pretty solid!!

@joshuahull4134 Год назад

Strap in folks, it's another banger video from keyboard daddy. lmao. Great work as always sir! Love these deep dives into serious modding.

@epicyes3585 Год назад

Ive been using a screw driver then using the prongs on the top part of the switch to open them up for a while. This way works better than most switch openers out there in my experience

@triplei1931 Год назад

Wooting is such a God send. They set out to make the objectively best gaming keyboard out there and did their damnest to make is customizable so everyone can have the best experience possible. They easily became my favorite gaming company the second I heard of them.

@LLMOFO Год назад

Love the humor ❤

@riceshakes Год назад

Appreciate you showing the burger mount, this is the exact config I wanted to go for. Unlucky that the steel plate limits the sound so much. Really wish wooting would offer fr4 options

@Clackbait Год назад

I'm glad I'm not the only one who cracks open switches with a tight fist! Man up baby! Hahaha. Love the mods bro. Great video as always. 🤜

@peejinator Год назад

such a good ad segway I actually watched the entire ad.

@badseedtech Год назад

Thanks! I've actively been looking for sponsors that exist in the PC space that aren't things that I usually review.

@deondrelocket5755 9 месяцев назад

I watch this guys videos like five times and every-time I find little nuances that I didn’t see the first time. Almost like watching a movie 😂😂😂

@badseedtech 9 месяцев назад

Ayo I appreciate that fr. I always try to put little easter eggs in there

@micdraypr1855 Год назад

I been using a Wooting One TKL from the Kickstarter for like 5+ years now, with no issues. My roommates USB port went out on his after a year, but he normally goes thru at least 1 kb per year so not a fault of the Wooting.

@ChadAltDelete Год назад

Gigawho!? Great video, you went deep on this one...

@CallumAFK Год назад

I have been seeing this keybaord pop up a lot in 2023, and I feel the strap is a must imo, it is more the feeling of if a friend comes over or you walk into a LAN, that strap catches eyes and puts fear in the air, as they know- they know you have an advantage on movement and rapid keystrokes! haha but thats just me, I like little gimics like that, but I can see the pros of modding, and really making a sleeper keyboard ;)

@DanD-9mm Год назад

I'm following this, and I just bought a lot of the stuff in the video. Thank you for the information. I ended up going with the GMK Yuri R2 keycaps, but everything else is the same

@rev8962 Год назад

11:20 LOOK AT HIM HE KNOWS HOW SMOOTH THE ADD WAS YOOOO MAN THAT WAS AMAZING😂✨

@wischtheweeb Год назад

ily - wonderful video!

@badseedtech Год назад

thanks so much!

@bardown1881 Год назад

I really like the kbd fans board with the wooting dampening.

@g1zmo85 Год назад

This video is next level

@skystrobe3325 Год назад

nice video really appreciate the effort that went into modding it, have you considered maybe installing the pcb in a fjell ? would be even better than a tofu and should theoretically fit

@MisfireKB Год назад

Its incredible to me the amount of thought these guys put into this board. With how accessible the tofu is in general, this board ends up being more than good enough for the average gamer/gaming keyboard user. Sure the enthusiasts may harp on things like the steel plate and stiffness but to the everyday consumer, a tofu and some lube can send their typing and gaming experience to the moon, and that is so fucking cool. Also love that you walked through specifically how to mod this as well - I can also see this being a great guide for modding and making improvements for ANY gaming board, not even just this one. Awesome vid man, you can really tell that you care to get consumers the best experience possible and we love to see that.

@badseedtech Год назад

🙏🏼 appreciate you man

@navinnaido3203 Год назад

As usual great video and coverage for people who want to take make wooting custom. Wooting just need to release their plate file and in no time you can easily get aftermarket plate for this pcb. There are vendors who are willing to make custom fr4 and carbon fibre plate but plate file is needed to get it done.

@Jankylulu Год назад

You did it man! I’ve joined the hype train 😂 I literally bought all the items needed and im going to try out my first custom (well semi custom) built keyboard! Appreciate the video! One question though; if I use the wooting mat mod, can I still use the zip on the inner deeper area of the tofu to cover that part at least with it?

@ghost-type Год назад

I love the keyboard stuff. For me, I'm cool with whatever you feel like making.

@badseedtech Год назад

Thanks!

@Jaypher Год назад

What a bad ass shirt, BST!

@vansh8berre Год назад

Nice vid!

@Delbs1 Год назад

God I've been waiting so much for this!! Grat stuff Bryan! :D Edit: Hope Wooting do listen to the enthusiasts, as PCB Mount Stabs and Alu/FR4 Plates would be a MASSIVE upgrade - and yeah, I would definitely ditch my Bakaneko60 for it. Also, I've seen people modding the PCB into the Blade60 case, and it is indeed a nice alternative (The standoffs are removable and have their own take on the burguer mount).

@kiljonlenin 11 месяцев назад

6:34 Zipfit damp 7:10 Wooting damp This is just for me to compare which sound I like better Wooting damp sounds deeper

@middle_pickup 10 месяцев назад

That Roland T is fire.

@zandkeyboards Год назад

Thank you Mr Seed

@AmauryWithTheApe Год назад

I'm still waiting on my board to come in so this video is preparing me to spend even more money

@PaulSebastianM Год назад

You can prevent scratching the paint if you pull the switch up straight instead of rocking the puller back and forth when pulling the switch out. It's harder and the switch comes out more violently but nothing bad is going to happen. If you have a sturdy hand and pull without holding back you'll get them out faster and better this way.

@ilovecarti1629 Год назад

that spacebar is pristine

@ryansheldon6046 Год назад

The “Brazzers” gag was priceless.

@oldkirk Год назад

Looking forward to more IEM content. I just picked up the sennheiser ie 600s and love them. Be cool to hear your thoughts

@siegekeebs Год назад

one of the things you can do to make a plate work without standoffs is to put a small dab of hot glue on all of the fixing pins in the pcb to keep it all nicely together. It's removable still, but secure!

@FunkyHQYT Год назад

Oh yeah! It's IEM time baby!

@str1fe192 Год назад

Great vid, I'll stick to stock

@hwooth 5 месяцев назад

For those wanting RGB + Cherry keycaps, Wooting has updated the Lekker switches to use the newer top housing mold that doesn't interfere with Cherry R3 keycaps. So north facing doesn't have interference anymore!

@TheChillBison Год назад

I wasn't considering a 60%, but I am now... Love those Grand Prix keycaps, but holy cow, $$$!

@cooleyzz Год назад

Man the sound of the board with the dampeninf and tape mod is nice. But I only use TKL and made my glorious board 2 years ago and have no issues thankfully lol

@efun1234 Год назад

wow modding this is so good

@MrScabbyballs Год назад

If you want a nicer case try and get hold of one of a Mekanisk Fjell or Klippe. They have the same mounting points as a Tofu but sound and look much better. Also its a shame the PCB and plate sounded so crappy in the Salvation because they board does sound really good normally. Some of the more flexible plate materials might work if you used some plate foam.

@KillWija Год назад

Anybody know where I can find a low profile keyboard case I want to swap my wooting into one

@TheRealdraudE Год назад

This looks lit

@badseedtech Год назад

**THE FOLLOWING IS FROM WOOTING BUT RU-vid KEEPS DELETING THIS COMMENT** "This is an amazing overview for modding and beyond what we could think or show ourselves. On behalf of the Wooting community and ourselves: big thanks. The burger mount is a good suggestion! Some useful information for anybody looking to mod their 60HE: The Wooting 60HE 2D/3D design files, we publish everything on our GitHub: github.com/WootingKb/wooting-design/tree/main/wooting-60he Public list of 60% cases verified by us or the community (updated over time, not limited to): wooting-technologies.notion.site/de7a52e2b5a941258a17e448b0c9d9b0?v=5ec0b31c59db4a51b8a86a1288249e9f Concerning swappable switch plates, we are looking into them. We are most concerned about the integrity of the Analog signal, but it should be possible! If you attempt a custom plate yourself, there's been a few on the Wooting community that have done it successfully. You'll need to match the PCB screws with the custom plate (creating holes) and use spacers to attach them."

@DMEGC Год назад

Can you use a gummy o-ring mount with your custom plates?

@Flaminq Год назад

No BS guide is so convenient

@ChristopherMichaelR Год назад

Thanks for the tip about the titanium switch puller. I have the Rama one and it sucks. It bends so easily.

@jackporter3038 Год назад

that brazzers logo got me good lol

@DustinKucey Год назад

Where do you get your mousepads? The designs are sick! I am going to purchase yours, but want a funky bright design to switch out. Any recommendations?

@Vxid4535 Год назад

Honestly I like the way it looks stock way better

@deadewok02 Год назад

that Roland shirt goes crazy.

@a1337cookie Год назад

Great info! Did you try a resin or acrylic case? From what I gather, it should sound deeper than the aluminum. I probably won't bother with a case swap on mine, just lube and spring swap, but if it sounds really deep in resin or acrylic, I might consider it.

@felixftp9670 11 месяцев назад

6:39 What Mousepad is that? It look's so nice.

@johnnytex1040 Год назад

3:10 w/ a bead like that I was half ready to believe it lmao

@chunger169 Год назад

What is the screw size for the screws that attach the plate to the PCB? Are you able to get the standoff outer diameter as well? Trying to get an aluminum plate cut from the github files, but I think the file is based on press-in standoffs, and I will need to design for screws on both sides of a regular standoff.

@hxpers Год назад

I think you did a great job modding and upgrading this. I hope I win nachocustom's giveaway, I'll probably do a similar mod since I really like how this one turned out.