Ultra RARE 1960's Ducati Scooter First Start After 30 Years

Подписаться 474 тыс.

Просмотров 91 тыс.

50% 1

I buy a 1960's Ducati Brio 100 that has been sitting for over 30 years and rebuild it. Will it run and move again? #Ducati, #Rare, #FirstStart
►SUBSCRIBE: / @2vintage
►MY SECOND CHANNEL: • New Polaris ATV Snow P...
► ADD ME ON ALL SOCIAL MEDIA ◄
► FACEBOOK: / 2vintageyoutube
► INSTAGRAM: 2_vintage_ / 2_vintage_
► SNAPCHAT the2vintage
► EMAIL FOR BUSINESS INQUIRIES ONLY: 2vintagetooo@gmail.com
Thanks for watching and subscribing!
New videos every week!
The following video features activities performed in controlled environments by knowledgeable persons. DO NOT attempt to duplicate, re-create, or perform the same or similar activities at home, as personal injury or property damage may result. 2vintage( Joe Weber, the persons shown in this video and ANY CONTRIBUTOR, ARE NOT LIABLE FOR ANY such injury or damage. ALL 2vintage( Joe Weber) CONTENT IS FOR ENTERTAINMENT PURPOSES ONLY.
2vintage (Joe Weber) makes no representation about the sufficiency of any safety precautions and equipment used in this video.

Опубликовано:

8 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 401

@user-wv8fw7ib4n 4 месяца назад

Your calm and clean,no vulgarities makes your channel a pleasure to listen to………

@AnthonyRufo-rc1zm 11 месяцев назад

This machine is worthy of a complete restoration, even if you can do it a little at a time. I'm willing to bet there are a lot of vintage scooter collectors out there that would love to add this to their collection & would be willing to pay good money for it.

@siqsteen 11 месяцев назад

my exact thoughts

@pb6839 11 месяцев назад

if he lived in europe he would get alot of money

@AnthonyRufo-rc1zm 11 месяцев назад

@pb6839 pretty sure there are collectors over here that would pay good money too

@pb6839 11 месяцев назад

definetely, but more in europe.The scooter culture has made a big comback in the last years since covid@@AnthonyRufo-rc1zm

@jennyloughry896 11 месяцев назад

Need to do the famous “Italian Tune Up” just take it and run it hard til it clears up.

@kernow2stroketuning 11 месяцев назад

That’s crazy how someone knew that chainsaw piston rings fit a completely different engine. Very good knowledge your viewers have

@chasleask8533 11 месяцев назад

When changing cables on this type of scooter body , always either tape the new cable to the old one , or tape something ( like string) to the old one before you pull through . At this stage , push wire up from below and use it to pull new cables through.

@M.TTT. 11 месяцев назад

Yep, he still makes a few noob mistakes, but we all do

@Thor555555 11 месяцев назад

a welding wire works almost every time. but putting it to the old cable before pulling it is the way to go if you know.

@M.TTT. 11 месяцев назад

@@Thor555555 rather not waste mig wire

@lappdawg1 11 месяцев назад

Learned that procedure from switching electrical wire through conduit, tying new wires to the older ones and pulling them through, some sort of lube at the beginning of the new wires always made life easier as well 😉👍

@Thor555555 11 месяцев назад

@@M.TTT. it´s not that expensive, and how much do you need, 6 foot? At least you can use it after for something else, to hang up parts for painting etc. I think it works very good, stiff enought to do not bend that easy and you can get it through by wiggeling it the most time. bending the tip 180 degree helps to not pierce something and get stuck.

@shmitt8307 11 месяцев назад

I think the oil fill is the Ducati symbol that has the screws on the side case

@bradleynevills4444 11 месяцев назад

For future reference always pull a string through when you pull out the old cable so you will have something to tape to to pull it through

@durdensdaddurdensdad4442 11 месяцев назад

Dude, I watch you all the time. And my 14 year old son now watches. He is so into bikes now and I love it, he love’s wrenching now. Great channel. Keep up all the content.👊🏼

@uriahpolite1594 11 месяцев назад

Just when I think RU-vid is dead here comes this guy never failing us 💪

@RCgarageTexas 11 месяцев назад

Yeah I don"t know what happened but every channel is suffering

@Antiquefarmequipment 11 месяцев назад

@@RCgarageTexaswdym?

@danm2422 11 месяцев назад

Yes! I was about to comment the same thing. I especially wanted to see an update on this, never seen one before.

@imaginaryfriend9655 11 месяцев назад

running it in first gear is a good way to overheat and sieze it just after you brought it back from the dead, btw those panels come off to reveal a tube frame, which should help you to route the cables etc...

@ashleymontague957 11 месяцев назад

Yep. We noticed that the little motor was not warmed up before the test ride. And the gentle hand on the throttle , so as to break in the ring job, was more like "full bore from the git=go." Cat did not even know if the sump was dry. We ain't complaining. We like the entertaining vids from this channel.

@ronalddaub9740 11 месяцев назад

@@ashleymontague957don't worry about the sump it doesn't have one 😮 that's for a 4 cycle engine This is a two-stroke and the gas is mixed with the oil

@ronalddaub9740 11 месяцев назад

@@ashleymontague957anything needs to be broken especially this.

@ronalddaub9740 11 месяцев назад

Fix that thing.

@ronalddaub9740 11 месяцев назад

IT'S SUPPOSED TO SMOKE IT'S A TWO-STROKE.

@TheKerb10videosandpictures 11 месяцев назад

Wow, I didn't expect you could fix it so quick and ride perfectly.

@davebarrowcliffe1289 11 месяцев назад

Changing cable outers on Vespas is easy. You take the old inner out, then use a long piece of wire, double the length of an inner cable threaded through the new outer then you pull the old outer out and it is replaced by the new outer as you pull it out. New inner in, job done. Too late now though... 😢

@cleighton1605 11 месяцев назад

I was going to say the same thing. Or, tape a wire fish to the opposite end of the cable/sheathing you are pulling, then at least when you pick up a new cable, you have something you can tape it to for pulling the new cable through it's exact position.

@user-ho4sk8mg4j 11 месяцев назад

You get the correct oil level by removing the small plate on the clutch cover with the two screws, fill it until it flows out of the bottom of the hole. Make sure you set the mixture screw so it runs slightly rich or you could get a seizure. The crank seals can be checked by blocking off the exhaust and inlet and pressurizing the crankcases, see how other scooter buffs do it.

@jakeslouw3416 11 месяцев назад

Yep, the little Ducati badge is the filler hole.

@ronalddaub9740 11 месяцев назад

I would say the seals deserve to be looked at And if you're going to split the cases you might as well put bearings and everything in. And to the people talking about it's smoking it's supposed to smoke it's a two-stroke

@ronalddaub9740 11 месяцев назад

You need to break that thing in nice and easy

@ronalddaub9740 11 месяцев назад

That Honda single you was working on earlier that barely started and someone had rebuilt it supposedly the timing on that is way off and I'm saying ignition timing It may have had something to do with the burr you had to file down

@ronalddaub9740 11 месяцев назад

Need to just split the cases and rebuild it and if he doesn't quit kicking on the kickstarter without engaging the gear before slamming the kickstarter he's going to have Kickstarter trouble

@owensbama1923 11 месяцев назад

Should just buy some gasket paper. Super easy to make a base gasket. We make them and copper head gaskets all the time. Just anneal the copper. Both really easy to do.

@wannawin95 11 месяцев назад

Keep up the great work man. We love these videos bringing old stuff back to life...

@dave1135 10 месяцев назад

You have a smooth touch, seems there isnt anything you cant get running. Theres a few mistakes, but thats how we learn. Ive been working on bikes and three and four wheelers since i was a kid, im 55 now. Worked on them for myself, and professionally. Have also been a ASE master auto tech for the past 30 years. You take on and successfully fix things i'd shy away from.

@johnnyjohnson2942 11 месяцев назад

There should be a copper head gasket between the cylinder and the head.

@neillambourne8448 11 месяцев назад

Maybe not.vespas dont

@johnnyjohnson2942 11 месяцев назад

@@neillambourne8448 Pre head gasket!

@sennavanwaardenburg460 11 месяцев назад

You mean a metal gasket

@johnnyjohnson2942 11 месяцев назад

@@sennavanwaardenburg460 No, early two strokes had a copper head gasket.

@EdwardInglefield-e9f 2 месяца назад

Just perfect for me this : so much in this world is divisive and your vids allow me to focus and enjoy an area I have no clue about! I just enjoy it.Thanks

@OldGlaseye-gf7si 11 месяцев назад

Well done getting that old beast running and rideable.

@peteraitken6494 11 месяцев назад

Good job getting it to run joe once you get more parts etc and cleaned up it should look pretty good don’t think some people understand or give you time to repair these machines properly as the main thing is see if it runs first before pouring money into a lost cause if anyone else reads my comment please guys give joe a chance after all he pours these videos out on a regular basis which in itself takes a lot of time and always entertains my hats off to him great RU-vidr with great content and some awesome machines 👍👌🔧🔧🔧❤️

@charleskloentrup9153 11 месяцев назад

You are 100% rite .

@tomfry131 11 месяцев назад

I absolutely agree with you sir

@Gary-Seven-and-Isis-in-1968 11 месяцев назад

On the other hand a job rushed, poorly executed and littered with errors is bound to irritate some people.. If it's worth doing, then it's worth doing right and not just for RU-vid views.

@peteraitken6494 11 месяцев назад

@@Gary-Seven-and-Isis-in-1968 if it irritates some people they don’t need to watch simple

@Gary-Seven-and-Isis-in-1968 11 месяцев назад

@@peteraitken6494 And if there is a comment section, people can and will comment, also simple.👍🏼

@pupi149 11 месяцев назад

I'm glad the engine started!!! Also that the smoke went away at the end. This scooter is running out of secrets although it still has quite a few left.

@allenbuck5589 11 месяцев назад

Man I was holding my breath. Then it popped off. Awesome job. My hats off to you. These were around a lot when I was a kid. Older brothers had them. Thanks I enjoyed watching from. Sc

@Ex-pomjohn 11 месяцев назад

To route cable use a flap of plastic tied to string ,use a shopvac to suck it through then tie cable to string and pull it through I use this method often cheers John in Tasmania

@MOAONAABE 11 месяцев назад

i remember riding a scooter at the scramble course back in the 60s, it had the kicker in the running board.

@bradley7723 11 месяцев назад

Congrats on getting it running.. you may want to use a 3 stone expandable hone for initially trueing up the cyl bore then use a ball hone for cross hatching. Before tear down some degreaser and power wash will get everything nice and clean. Good job on finding rings for lt.🙂

@douglasr.c.5622 11 месяцев назад

It would be so much more appealing to see the work being done on a cleaner machine.

@rayploss763 2 месяца назад

Would have been wild if the socket popped off while you were revving it up 😂 I've never seen someone tried to start a engine like that way

@JoshuaJonah 11 месяцев назад

It's not idling because the tiny reed valve between the jug and the intake tube broke off, they were fibreglass on these old Italian scooters. I've had good luck custom making replacements out of metal reed valves from larger motors, they also last forever compared to the old fibreglass ones.

@ar2043 11 месяцев назад

I'm gonna give you a big W just for finding piston rings that would work and getting it running. No matter what that's a W!!!! 🇺🇸🇺🇸👍🏼👍🏼

@Georgeolddrones 11 месяцев назад

I would sell this if you are not going to restore it properly. And not just piss about with it need restoring properly 👍🇬🇧

@richardburke7339 11 месяцев назад

Caught a glimpse of the new driveway Joe, looking good 👍

@thetoymanator7723 10 месяцев назад

Ha ha - the old "gas was off". Don't know how many times I've done that!!!!

@CostaMesaPhotography 6 месяцев назад

One of the funnier videos you've done! You looked almost like a kid at Christmas out trying to ride his new toy! Running to start it, and then smoking up a storm...made me chuckle watching this! Looking forward to another video on this project!

@johnhicks735 11 месяцев назад

The oil dipstick is in the front of the engine Joe on them.,an some of those are sealed cases to. Try checking underneath of the seat for your oil tank to for it.

@sleepervega71hill28 11 месяцев назад

Hello. I had a Kymco people's. Two stroke 49'cc finishes out @50'cc Rebuilding outside. Coated rings in oil/used cooking oil. Left sitting by it to get something. Came back to find Stitch". Nextdoor dog taking off with them 😭. 😂

@RayFinkle 11 месяцев назад

Should have gotten Victory Outdoor to do a concrete driveway.

@neutonrenda2303 11 месяцев назад

Wow, amazing that you got it going again, starting so easy, great job again.👍

@puff427 11 месяцев назад

Def put that in corner as a vintage and save it.great find.the name and age alone will get collectors attention. B safe.peace..

@ko9446 11 месяцев назад

Barnett tool and engineering in Ventura California for cables. Yes, Barnett the motorcycle clutch company. They make custom cables.

@bfox87 11 месяцев назад

Leak down test for those crank seals

@mikehudge78x 11 месяцев назад

I have watched this video a couple times - skipped here and there - think this scooter deserves fresh paint etc 👏 very cool 😎 and worth it

@blacksun3871 11 месяцев назад

Italian 2strokes used grease for sealing cyl. Heads in old days

@thebigguy8306 11 месяцев назад

Wow, great job. Sweet hearing it hum along. Crab walking to start, like most Italian motorized things, like the Flintstones

@neutonrenda2303 11 месяцев назад

Reminds me of my first bike, Suzuki Gt50 with a snapped of kick start shaft. I was 11 years old and paid 100 bucks for it, loads of fun, became an expert at bump starting on the run.👍😂

@garymucher4082 11 месяцев назад

Now since you have it running, I would absolutely tear everything down and refurbish back to as close to new as you can get it. Since it is so rare, that would be totally fitting... Thumbs Up!

@user-fi3fx5my2s 2 месяца назад

Got to route that cable underneath where it goes Joe, it'll get snaged on something.

@will17527 11 месяцев назад

Always excited when you post amazing content guy never sleeps keep up the good work much respect from London

@petepeabody8905 11 месяцев назад

This was truly one of the most impressive restorations so far, and there's still much to be done

@staind288 11 месяцев назад

Lol😂 restoration? Really?

@Gary-Seven-and-Isis-in-1968 11 месяцев назад

That was a massacre not a restoration. You saw the smoke, those rings didn't last 30 seconds and no oil in the crank case. Killed it.💀

@itarry4 11 месяцев назад

Hated every second if this is so rare whys he destroying it rather than actually restoring it.

@ronalddaub9740 11 месяцев назад

@@staind288yeah it seems like the vernacular is changing on that one now also I tried to explain it to them

@ronalddaub9740 11 месяцев назад

@@Gary-Seven-and-Isis-in-1968that's a 2-stroke engine it is supposed to smoke because there is oil mixed in the gasoline , as far as the sump as you call it it doesn't have a sump as you're saying it has a transmission some but the engine is separate on a two-stroke A two-stroke is an atmospheric engine when the Piston goes down it shoots gas and lubricant up to the top of the transfer ports and then does it all over again unless it uses a reed valve and that one does not have a case read it is a piston Port 2-stroke there's different kinds of two strokes also but you're way off on calling that a 4-stroke

@denniskrohn7034 8 месяцев назад

Cool old scoot. You have to have some pretty cool understand neighbors. Look forward to future videos on this project

@mrpurcountry 11 месяцев назад

You do realize using a ball hone on on a two-cycle can damage the ports?

@clamppa 11 месяцев назад

Who needs a bug fogger when you have a 1960’s Ducati… I chuckle because I have a 1963 Vespa 150cc that performs mosquito control up here in Gilbert,Mn. Good job at getting her running.

@akafrosty6175 11 месяцев назад

Man, I have actually been looking forward to this one.

@franckneumann9882 11 месяцев назад

Great dive onto the rarely if never seen machine ,i totally respect your perseverance, stubbornness to achieve your goal, and excellent content always enjoy it...🌞

@mikehudge78x 11 месяцев назад

Great video and unique machine you have there Joe !! I worked at 2 cycle shops in my time and have extensive parts inventory and recently filed down rings for a 76 Honda xl 350 project !!! Half the fun is chasing parts that will work etc you know the drill 😂 it is raining bad in north Minnesota today as well !!! Love your variety of projects 😍 amazing content

@Ordrock7 11 месяцев назад

I've got a 77 XL350. It has all kinds of stuff to it. I had the valves redone. Man was that a pain. Just finding some shop to regrind and replace the slightly bent valves was tough. The tank needed sealing. But the one thing I don't have is the end of the exhaust. For a replacement carb I went to the experts, Sudco. They had exactly what I needed and the intake tube. If you are in need of the replacement info ask and I'll forward it to you

@barbaraneville5036 11 месяцев назад

I wouldn't run that too long without the cooling tins fitted

@Keirdo69r 11 месяцев назад

Love this channel, such a chilled out vibe 👌🏻

@ianflynn4980 11 месяцев назад

Try some Lambretta cables (Series 2 are longer). Lammys have the same gear arrangement. Full sets are readily available with modern no-oil outers etc.

@cav3man360 11 месяцев назад

Cool bike for sure didn't know that Ducati made such thing

@brianjones4026 11 месяцев назад

Nice Job Mate, over here we call this a Scooter not a moped ! I ve had many Vespas and Lambrettas, even had a Durkopf ! Did not know that Ducati also made a production scooter ! Seems there model was swamped by the legendary Scooters of Piaggio and Innocenti ! It seems to have a lot in common with a Lambretta ! Nice Zippy little Scoot for sure ! Did you not see gaskets when you dismatled the cylinder and head ! Could be drawing oil into your cyclinder, not sure that black gunk you used is enough !

@milanbukorovic1469 11 месяцев назад

That's a cool machine

@doctorjohn-burgtekie 11 месяцев назад

Don't have to worry about mosquitos. Scooter rebuild coming along nicely.

@mikehudge78x 11 месяцев назад

My current project is a 1983 husqvarna cr 500 - paint engine suspension all done just need to tidy up some details etc but be race - show ready by spring - been a 2 plus year project 😮

@Ordrock7 11 месяцев назад

I dig your video's and the speed in which you get things to run. It wouldn't bother me one bit if you stretched a few of these builds into a restore video. If you were to completely tore that scooter down. Have the engine vapor blaster, the chassis blasted and repainted, the frame blasted, wow. Why not. There is no way what you do can be sustainable. Buying a new bike every day to have a video every day and not to mention the garage being filled with all of these projects. Do a bike complete restore on that little scooter. I thing that would be awesome. And, besides, you could get other guys in the fix. A vapor blaster and a paint guy, why not. Scott in Southern Oregon

@idanny-xz6bf 11 месяцев назад

Man that thing is cool good job getting it working.😊

@davesplace1307 11 месяцев назад

Joe you can buy gasket material paper. In different thicknesses. Make your own gasket 75% of them are easy cuz you can stick them on the surface you want to make and slightly tap with the back end of a screw driver or roll it around the edge. Use a socket to cut the hole. Lay paper on something hard like a vise anvil or hard wood. Take a socket with the appropriate Outder diameter. Line up perfect and hit with a hammer. They make gasket punches just for this reason

@user-jp8tl1wi7g 11 месяцев назад

eBay had base gasket too. But nobody never listens to me.😮

@geraldrichardson7252 11 месяцев назад

Sweet little bike! Good job!

@briankeenan4901 11 месяцев назад

I watch the channel "2stroke turbo" and if I'm not mistaken, sometimes the 2 strokes are drained and filled through the same plug..

@georgemaher5129 11 месяцев назад

Hi there. The engine certainly sounds like it's WORTH restoring. Just one piece of advice : it is extremely inadvisable to keep running it in first or second gears for too long as this runs the real risk of burning out the clutch - particularly at high revs. Thanks for reading this.

@tracysellman1562 6 месяцев назад

Joe, I know you get excited to get these things running and get to ride it. I get that, but next time don't go all gorilla and rip cables out if you are replacing them tie the new one on and wrap it up with electrical tape on all the snag points lube it all up good then pull the old one out and the new cable will be in its place without all the fighting. Just an old-school trick. lol Good video buddy. :)

@kobybear08 11 месяцев назад

Harbor Freight, Joe has a reasonable arm&hammer soda sand blaster that'll help to clean off the paint and rust, imagine it'll look amazing when your done, another diamond in the rough.

@douglasr.c.5622 11 месяцев назад

Nope, just leave it looking like a hunk of junk.

@ryanjohnson1814 11 месяцев назад

Congrats on getting it running. Restore it, 🙏 please.

@snowyowl7042 11 месяцев назад

Your knowledge and patience are amazing. I see a replacement for Jade's Landrover?

@jayjudd6518 11 месяцев назад

😂 ❤ you know that is hilarious if he even says something he’s dead meat😂😊😊

@tonyaxeman4381 11 месяцев назад

The oil fill may be under the name plate on the left side cover .

@danjohnson4819 11 месяцев назад

Things that are made well usually stand the test of time

@grahamswann9103 11 месяцев назад

Hi there from Hastings UK 🇬🇧

@jayjudd6518 11 месяцев назад

❤

@David-oi7im 11 месяцев назад

... good job joe, only details left which is always the other half of the battle!!!

@markhinde6187 11 месяцев назад

Ducati scooter, very rare in the UK, nice post

@Richard_Gobbler 11 месяцев назад

Joe you sound like you are from Wisconsin 100%

@johnhicks735 11 месяцев назад

Just remember to bend the angle up on those ends and leave the middle straight. until it starts reaching the metal foot tab part right before that area on them. It's A simple fix for it. That's the kind it takes anyways. I'd just round those squared ends off of your squared pieces. On the top tip part of them is all on each end of them. With your grinder smooth and maybe paint it with top coat black.

@CHIEFmschf 9 месяцев назад

Now to find some sweet jumps to send it on

@Nine_883 11 месяцев назад

It would be super helpful if you would leave links in the description to the first videos of the bikes you are fixing. I have trouble finding the original videos sometimes. 😅

@teyoung2000 11 месяцев назад

Good luck on the restore...can't wait too see the results.

@mgoodoubledoo 11 месяцев назад

Can we get more videos of Vinnie chasing the bikes! I was rolling!

@PaulvanNieuwenhuyzen 2 месяца назад

When I took cables out, I directly attached a piece of rope, or the other cable, to be able to get the new one in the good place instantly.

@vanfairbanks7389 11 месяцев назад

Great job getting this running. Even finding chainsaw rings. Unlike the recent moped, which might not be worth the effort to restore, this Ducati could be something special. Good luck

@1leggedmedia 11 месяцев назад

He didn't find them he was given a kink to them I know I gave one of the links.

@user-ho4sk8mg4j 11 месяцев назад

Fully restored this bike will be worth large figures and more for the right collector.

@vanfairbanks7389 11 месяцев назад

@slim433hd Well, I'm not really sure why you felt you needed to tell me that

@MR-puffnstuff 11 месяцев назад

You should restore this back to prestine shape again should not be too much of a project alot of parts can be manufactured and there is not much to it repaint it and plate the metals again.

@dadandkids5028 11 месяцев назад

Use the old cable to pull through the new one.

@eustaquiokiller 11 месяцев назад

She deserves to be completely restored

@donpampel3332 11 месяцев назад

Great Video JOE. You won't have to worry about mosquitos.

@johnathanohara1149 11 месяцев назад

Great video I hope you restore this the best you can

@Rooonga 11 месяцев назад

If you’ve cables still running through could you connect a fishing wire to the end, allowing you to pull that through the body & then be able to pull new cables back through the right way? I’d really love to see you restore this old beauty.

@Rooonga 11 месяцев назад

Sorry. I posted before I read other comments. Already mentioned.

@lucapala2865 11 месяцев назад

The "oil plug" is Ducati cover in clutch side

@tagoooU 11 месяцев назад

We always called the ball hone a dingle berry hone, Ha!!

@xx3868 11 месяцев назад

With fitting rings, you need to adjust Gap at unworn part of cyl; basically bottom area as if you do it at worn section around top, the gap might be just right but when the ring goes to unworn part and is hot, it might be too tight and touch. Also you need to check side clearance of ring in the grove so its not too tight or loose as these were not likely the rings the Italians used for that piston? Excellent work on what you did, i just wanted to point out some extra hints so the job is done as good as it could be and not cause install problems once the engine is hot and parts expand..

@user-fi3fx5my2s 2 месяца назад

Got to seat that piston again.

@bigbullhorn8443 11 месяцев назад

Electrian fishing wire tool. May have to drill a hole or 2 now that u pulled it through without tying a string to it but hey u have a welder to plug that hole u drill. Good work man

@mrr8697 11 месяцев назад

Might help if you pressure wash the engine finding oil fill

@robertcraft-pj2jp 11 месяцев назад

Awesome Joe…. There is nothing you can’t make run!!!🇺🇸⭐️💫 Hoosier Wing

@ronalddaub9740 11 месяцев назад

As far as the cables don't get in a hurry put them in where you can't see them turn it upside down or laying on its side shine a light down through it if it was done before it can be done again I know you're wanting to get it done but do it right turn it upside down and Jam that cable through there.

@johnhicks735 11 месяцев назад

That's suppose to have A thin like paper.,or fiber material gasket for the surfaces between both. A thin coat of sealant. on both surfaces to stick and seal up properly to prevent air leakage. Throughout the cylinder head and jug under compression. Through the center and bottom center of surfaces.