Ultrasonic Water Level Arduino Uno Project(JJ Informative) ultrasonic hc-sr04, oled ssd1306 display 

Thanks for liking

Lioness (Instrumental) - DayFox [Vlog No Copyright Music]

Yes you need to set code for 7segment

check the calculating distance section you have to work a little about it so i hope you can do it but if you still have any problem i will guide you good luck

Brother tell me what i have done in calculating distance section I don't know brother please tell me..

Brother please tell me what work i have to done in the calculation section..can you please write a code here please

@@irxlanmughal3179 h = t / 58; h = h - 6 ; // offset correction ///////////////**** error setting h = 20 - h; // water height, 0 - 20 cm //////********* tank height in cm hp = 5 * h; // distance in %, 0-100 % ///////*****factor to make value in percentage ------------------------------------------------------------ tank height in your case is 153cm which is equal 5 foot and factor will be 100/153 aprox 0.66 so, h = h - 6 ; // offset correction ///////////////**** error setting h = 153 - h; // water height, 0 - 153 cm //////********* tank height in cm hp = 0.66 * h; // distance in %, 0-100 % ///////*****factor to make value in percentage after that if you still feel result is not perfect then change offset correction value 5.4.3.2....... until you feel its perfect

Let me check..you are really very helpful brother...may Allah bless you..and give you more success

nope it is for small tank only big tank need big tank monitoring system

@@JJInformative bro. my underground tank size is almost 8-9 ft deep. then which sensor will work ?

@@rizwanmehmood2984 ultrasonic can be used (Measuring range 2 - 400 cm)

i will connect it as soon as possible

Describe your scenario

yes and led code replaced by lcd coding

Sir how and then what library should i download?

Sir i am doing my first project on this and i am very new in this work with small knowledge of coding and aurdino plz guide me in a way that i can understand

code main loop ma last ma ekk loop banana ho ga jis ma app buzzer ko on karo ga according to water level tank

no need module file to attach it

Sensor problem or might be connection problem

yes you need to edit the code and replace the display coding with lcd16x2 coding

It is not in product form right now so do you need to install it some where ?

check your arduino board

@@JJInformative i have already check

inshallah in next video ma