No video :(

Unbelievable Oak Firewood Production -- The Japa 405 Processor

Подписаться 45 тыс.

Просмотров 10 тыс.

50% 1

OWB Merch, Employee of the Month Tees here!!!
sweetvintagete...
-------------------------------------------------------------------------------------------------------------------
The Woodhounds podcast is a HUGE hit! You can find it on all you popular podcast platforms and also by visiting our website!
www.thewoodhou...
-------------------------------------------------------------------------------------------------------------------
Check out the gear I use in my videos here:
www.amazon.com...
--------------------------------------------------------------------------------------------------------------------
BUNDLED FIREWOOD BUSINESS SUPPLIES!
STRETCH WRAP-- click here for a site-wide a 10% off coupon. (affiliate link)
I have found that this works best....12" 90 gauge, Cast stretch wrap
www.shareasale...
LABELS -- visit this website for an exclusive offer to OWB subscribers! (affiliate link)
pekodesigns.com...
-----------------------------------------------------------------------------------------------------------------------
Please support our channel sponsors!
Eastonmade Wood Splitters
www.eastonmade...
Japa Firewood Processors
japa.fi/en/
Metsa Machines
www.metsamachi...
Titan Attachments
titanattachmen...
-------------------------------------------------------------------------------------------------------------------
==The OWB Business Development Center==
Website Help? Here is where you want to go! An exclusive offer to OWB Subscribers.
digitalredzone...
LABELS -- visit this website for an exclusive offer to OWB subscribers! (affiliate link)
pekodesigns.com...

Опубликовано:

22 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 132

@ohiowoodburner 5 месяцев назад

International Firewood Expo 2024 Tees...OWB Tees...Employee of the Month Tees here!!! sweetvintagetees.com/collections/ohio-wood-burner-ltd

@kyleysanj 5 месяцев назад

Your videographer captured some great shots of the processing today! She gets my vote for employee of the month!

@lanceharsh7025 5 месяцев назад

Great speed 😊 hope you gind a new bar soon. If your camera operator is an employee , I nominate her for employee of the month. If she is an independent contractor, that would obviously disqualify her, but maybe a bonus like 1/2 of a house or something. Take care.🤠

@ohiowoodburner 5 месяцев назад

haha! Thanks for thinking of her Lance!

@eerorauma293 13 дней назад

You nare real work horses both of you. Greetings from an old logger in Sweden.

@ohiowoodburner 13 дней назад

Thank you for watching from Sweden. You have a friend in Ohio USA!

@NeighborlyHomestead 5 месяцев назад

The Japa was just crankin! Hopefully you can find a new bar and get it changed. Great video Joe! - Tim

@eddeetz493 5 месяцев назад

Anchor seal good hardwood logs so you have material to mill at the show every year. Look into converting a 40' container into a kiln. Perfect use in a boiler of yard recycling and sawdust blocks.

@ohiowoodburner 5 месяцев назад

All of that is possible but I just don't have the interest right now to try. One day maybe

@user-td2qw6dg7w 5 месяцев назад

Joe, great video. I told my wife I hoped the bad storms from a few days ago didn’t relocate your new roof over the JAPA 405, from the video I’m watching looks like you’re all set. Joe, again great video & have a great day👍👍.

@ohiowoodburner 5 месяцев назад

haha this vid was about a week ago. All good up here so far!

@michaelfreehling1914 5 месяцев назад

Hey Joe the new smell of oak is profit. Hope you grow to like it. Shout out to Log Hauler Jesse. Y'all have a great 👍 day

@ohiowoodburner 5 месяцев назад

Thanks Mike. I don't think my nose will permit me buddy!

@Adirondack_DFL 5 месяцев назад

We used to put the old bars on the grinder real quick and take that burred edge off, sometimes you can hit it with the flat file. You get a little more life out of them. but when it is spread out and allows the chain to tilt they are pretty much done.

@ohiowoodburner 5 месяцев назад

I am going to file it and see if there is any difference. Thanks buddy

@user-vn6hi2bi3g 5 месяцев назад

Your processor runs effortlessly with only one person. It's the best I've seen great choice you made. Maybe hydraulic pressure/flow could be increased/adjusted higher if new bar does not rectify problem. Imagine this processor with a guillotine type cutoff instead of chain saw faster and no loss of kerf while eliminating chain saw maintence routine and sawdust accumulation. Production would increase substantially while reducing operating costs. Also by adding stroke length to splitter the processor could switch automatically changeing between 4X, 5X, and 6X splitter blades kinda of like geting to eat your cake as an added bonus. Production would increase astronomically. I love the after splitting cleaning this system provides for your split wood. As processor is in a fixed location with unlimited power available for this facility location and does not need to be mobile consider changing to electric powered processor which would more than half your operating hourly costs for fuel and maintenance and increase reliability Ray Stormont

@elainereid5833 5 месяцев назад

Good morning Joe, nice video. Elaine from Canada here, you lifted and changed out the wedges like it was nothing! Nice. And thanks for the explanation and commentary at the end about the saw, slash, live deck etc. (inquiring minds like to know). The Japa is hungry and you fed it. Keep up the good work, cheers.

@ohiowoodburner 5 месяцев назад

haha Thanks Elaine!

@alisciamarotta3888 5 месяцев назад

Thanks for sharing. Always enjoy your videos, stay well be safe Joe.

@ohiowoodburner 5 месяцев назад

Thanks Aliscia👍

@rodneysweetnam8653 5 месяцев назад

Hi Joe - it's Big Rodders in Ireland. Happy St Patrick's Day from the Emerald Isle to you and all your subscribers.

@ohiowoodburner 5 месяцев назад

Awesome! Thanks BR!

@Cinder2008 5 месяцев назад

Nice work! You split while advancing the log. Too often I see the split, then advance. The learning curve is working. I enjoyed the video.

@ohiowoodburner 5 месяцев назад

I would be even faster when I get the new bar and can dial in the saw correctly

@Riverguide33 5 месяцев назад

Quick work, Joe! Have a great day! 👍

@ohiowoodburner 5 месяцев назад

Thanks RG!

@jbbrown7907 5 месяцев назад

Fun to watch. You need to make room for the International Expo.

@ohiowoodburner 5 месяцев назад

I think we will be ok but I'm trying to get that one row of logs processed to open up more space. I doubt any new logs will be coming in until the ground firms up

@billobermeyer660 5 месяцев назад

That's getting it done Joe! The faster you process oak the less you have to smell it.

@ohiowoodburner 5 месяцев назад

hahaha which was my plan Bill!

@pnuttheclownh2254 5 месяцев назад

OWB is the king of premium service firewood!

@ohiowoodburner 5 месяцев назад

Thanks Mr Clown!

@pnuttheclownh2254 5 месяцев назад

@@ohiowoodburnerPlease just refer to me as 'P;Nut.' Do you understand the reason for the semicolon in my clown handle? It's because I underwent a colon resection of my ascending colon due to several cancerous polyps, which now makes me a 'SEMI-COLON'."

@Zeke-yv3nw 5 месяцев назад

Nice load of oak!

@ohiowoodburner 5 месяцев назад

Thanks Zeke!👍

@andrewstrauber3017 5 месяцев назад

And that is why I love this channel

@ohiowoodburner 5 месяцев назад

Thanks Andy

@davidedwards3734 5 месяцев назад

Great splitting session!! Stay Hydrated and Have a Safe Day

@richardbrowne1679 5 месяцев назад

Hi Joe: The operation is looking good. Metsa has a steel bar for the Japa’s now. I found they last longer than the aluminum bars. You local saw shops should be able to make up chains for you.

@ohiowoodburner 5 месяцев назад

I have the replacement bars but they are the shorter ones. Do you use the 60 or 61 DL?

@waynetharp 5 месяцев назад

@ohiowoodburner I would try the bar and chain you have first before having chain shortened. If there is enough adjustment, it will most likely work.

@cliffjenkins6419 5 месяцев назад

Hi Joe, had a 30inch bar reconstituted recently $65. Ground the wear edges off and"pressed" the groove to the correct width. Cuts beaut now and was athird of the price of a new bar. I'll get a new one soon anyway and then have a spare. Cheers from HB NZ

@Bigcheif360 5 месяцев назад

Good Sunday morning from Nova Scotia Canada

@ohiowoodburner 5 месяцев назад

Hi there Chief. Happy Sunday to you

@rodneysweetnam8653 5 месяцев назад

Hi Joe - it's Big Rodders in Ireland. It's an easy job to dress a worn bar to make it serviceable again - all you need is a vice and a file. Happy St Patrick's Day from the Emerald Isle.

@steam_fan 4 месяца назад

pretty sweet set up you got there Joe

@michaelburton5760 5 месяцев назад

the machine is fast thanks for vija

@buckinfirewood 5 месяцев назад

As soon as my saw starts acting up I change my bar and chain out.. we run many chains and 3 to 4 bars.. bars are not cheap so we dress the bar once it starts tracking on the wood .. not sure how you do it but I'll upload a video on how we fix the bar to minimize replacing it.. I'll shoot video and get it out by Wednesday if you care to see

@ohiowoodburner 5 месяцев назад

That would be nice to see buddy. Is it with a flat file or with a special tool?

@buckinfirewood 5 месяцев назад

@@ohiowoodburner use a bench sander.. I'll show exactly how we do it by Wednesday..

@terrypomatto907 5 месяцев назад

I like the way that you set up the way that you are operating. It looks fast and lest amount of having to rehandle the logs to get the results that you want. Very good job, keep the videos coming...

@ohiowoodburner 5 месяцев назад

Thanks Terry. Glad you liked it buddy

@ronbrooks6681 5 месяцев назад

Nice Oak Joe. The 405JAPA is just the Right way to do the Oak. The New Bar and Chain will be good. I just changed the Bar on my Stihl Farm Boss. I usually change it once a Year. No work today or tomorrow, just to Tired, as I think I did to much On Thursday for only an hour. Hopefully come around. Very Cold out this week and Windy but I am going to cut Some Wood at some point for an Hour my Friend. Stay Well, and Safe Buddy till your next Video. Ron from the Woodyard in Duanesburg NY.

@ohiowoodburner 5 месяцев назад

Thanks Ron. Take your time buddy. You will get stronger im sure

@ralphkanagy4602 5 месяцев назад

Good. Job. Nice. Video you. Do. Good. Work

@ohiowoodburner 5 месяцев назад

Thanks Ralph

@stephenc2296 5 месяцев назад

Hey Joe, great job. I would like to see Japa come out with a processor with a circular saw. I think with all the good press you give them you should get one to permanently test. I don’t think that I’m off when I say that you are the reason for half of their sales.

@ohiowoodburner 5 месяцев назад

Thanks for the high regards Steve. Japa is an awesome machine for sure buddy. Hope I can find this 16" bar somewhere

@user-xd5cc7kg8u 5 месяцев назад

Have you considered flat filing the chain bar lightly touched up with a grinder works well also any good grade bar should have many hours of use until completely of no use

@Beachwriter 5 месяцев назад

Good opening camera pan sequence, Joseph.

@ohiowoodburner 5 месяцев назад

You can thank my little writer. She was home from her eastern PA school for spring break! Lol

@Beachwriter 5 месяцев назад

It was a refreshing video technique. It follows the rule of good writing: The most important sentence we write is the first. That’s the one that encourages readers to read the second.

@JasperFromMS 5 месяцев назад

Brother Joe, I've been thinking about you infeed clearance problem witb the new shed. I haven't said anything yet, because i wasn't sure. But if you shift the 405 to the right a little bit, every foot you get will give you more clearance. You could easily get another two feet, but the problem will be the discharge. You can only move the cleaner over a foot at most ftom what i see in the video. You may be able to cheat a little more by adjusting the discharge conveyor. Anyway, random thoughts from a random guy on the internet. Good luck!

@ohiowoodburner 5 месяцев назад

Thanks Jasper. I had thought of that but figured it will just create another problem LOL

@OGAOutdoors 5 месяцев назад

Joe looks like you have everything moving right along. That’s the way to make firewood. You make more in 20 minutes than I make all day. Take care.

@ohiowoodburner 5 месяцев назад

...and I get cold making it LOL

@OGAOutdoors 5 месяцев назад

@@ohiowoodburner You need to get one with the enclosed cab and heater.

@outdoorswithlarryrobin 5 месяцев назад

Speed Splitting at its best, But where’s the seat for you😂 Good Show Joe👏🤘🏻🪵🇺🇸

@ohiowoodburner 5 месяцев назад

I need a lazy boy and an end table....I would never leave the wood yard! LOL

@outdoorswithlarryrobin 5 месяцев назад

@@ohiowoodburner😂

@billyhill101 5 месяцев назад

Always injoy a trip to Oakland

@ohiowoodburner 5 месяцев назад

blah! LOL

@DanielAtkinsFirewood 5 месяцев назад

The processor definitely makes things easier for you. 😉👍

@ohiowoodburner 5 месяцев назад

Definitely!

@larrykluckoutdoors8227 5 месяцев назад

The did a great job on the Oak, have a great day

@ohiowoodburner 5 месяцев назад

Thanks Larry!

@stuartpulvermacher6861 5 месяцев назад

I would put a header from corner to corner on your right side at about 8 ft. off the ground then cut those 2 steel studs down till you reach the top of the rails of the log table and weld in a sill then you would have about the same situation that you used to have it would create an opening in that wall so you could load long logs on the table again

@ohiowoodburner 5 месяцев назад

Interesting thought. Thanks Stu

@CodyH88 5 месяцев назад

For the bar and chain the best bet, besides online, would be a saw dealer or shop. Box stores might have it, but dealers can help get it right. Due to the fact it seems your chain possibly is a semi chisel, if not full chisel, possibly with square cutters, take your business card in with you. Some (most) dealers won't sell aggressive cut chains without professional credentials or some background like you have. Happened to my grandpa years ago who was told by a buddy he couldn't get one. Liability and risk management for them due to kickback, which I totally understand. Though yours is going into a machine, they don't know the use intended. Otherwise I would say buy a 16" bar and chain set thats more standard and it likely works just fine anyway.

@nickthrane4940 5 месяцев назад

Looking good 👍

@ohiowoodburner 5 месяцев назад

Thanks for the visit nick

@Frankzeien 5 месяцев назад

Man I would love to do all that oak that you have there. Maybe one day in the middle of the night I’ll sneak in and do it for ya lol.

@ohiowoodburner 5 месяцев назад

Bring your Febreeze Frank

@Frankzeien 5 месяцев назад

@@ohiowoodburner Nope don’t need that

@lyleharkness-rv5vf 5 месяцев назад

Good video 👍 Nice splitting

@ohiowoodburner 5 месяцев назад

Thanks Lyle

@haroldanderson2781 5 месяцев назад

It appears that you have the pressures dialed in on the Japa. The chainsaw was going through at impressive speed.

@ohiowoodburner 5 месяцев назад

Honestly it was a tad too aggressive. I had it dialed up to compensate for the worn out bar Harold

@Holzplatz 5 месяцев назад

7:26 why does the saw struggle that often? Ah, okay. Thanks for the explanation. :)

@ohiowoodburner 5 месяцев назад

haha! Thanks Holzplatz. Once I get a new bar we should be back to speed buddy

@Holzplatz 5 месяцев назад

@@ohiowoodburner That’s great to hear. :)

@robertlivingstone3947 5 месяцев назад

Great video joe i hope the tornado did not get u great job

@ohiowoodburner 5 месяцев назад

That was down south of us Bob. Thanks for thinking of us sir

@botabob 5 месяцев назад

Looks good Joe. Enjoy The Journey - Cheers

@ohiowoodburner 5 месяцев назад

Thanks Bob👍

@gillwest1155 5 месяцев назад

How many hours has the 495 done great videos i cut a small amount of fier wood for my self hear in suffolk England

@ohiowoodburner 5 месяцев назад

I think it is approaching 200.

@votered1552 5 месяцев назад

Great machine. But seems the saw is a little weak.

@ohiowoodburner 5 месяцев назад

Quite the oposite. The saw is very strong. I am having trouble with a worn out bar right now. I have the pressure dialed up too high to compensate. Sorta out of whack but it will be dialed in when I can find a new bar

@rogerbelanger295 5 месяцев назад

Nice looking operation. You brought modernity to one of the oldest human effort…getting wood for fire.

@ohiowoodburner 5 месяцев назад

I do believe Roger that 50 years from now this time will be the golden era of firewood machines. We are now starting to see some good competition and innovation

@richcooke9241 5 месяцев назад

Good Morning! What chains do you run on the Jopa's saw?

@ohiowoodburner 5 месяцев назад

it is just standard Oregon chain.

@joefeeley5551 5 месяцев назад

Thanks for sharing! I'm sure you've said many times but just once more, how much in your trailer??? Nice work!!

@ohiowoodburner 5 месяцев назад

This load was a little over 1/2 cord. Unmanaged piles of firewood always appear like there is more than there actually is.

@brucelowell7506 5 месяцев назад

Looks like the nice of oak is growing on you,I don’t see any air fresheners 😂

@ohiowoodburner 5 месяцев назад

had a nice wind carrying it away from me Bruce!

@brucelowell7506 5 месяцев назад

Gotcha,also thought maybe your sniffer was broken

@thecraportheoreos7834 5 месяцев назад

Hey 👋 Joe

@ohiowoodburner 5 месяцев назад

Hey there

@bigcharliesmodelgarage296 5 месяцев назад

What's the length of the cut logs?

@ohiowoodburner 5 месяцев назад

Firewood is cut at 16" . The logs on the table are around 12' -- 15' long

@bigcharliesmodelgarage296 5 месяцев назад

@@ohiowoodburner ok ty. Perfect length for my woodburner.

@OhioHillTopsHobbyFarm 5 месяцев назад

Awesome Joe! I sure enjoy watching you bust up some firewood. Makes for a good start to the day!

@ohiowoodburner 5 месяцев назад

Thanks Dave! Hope all is well down there

@waynetharp 5 месяцев назад

Do they make a 405 perfect split on wheels? Or just the model you have? Have a great day,Joe!

@ohiowoodburner 5 месяцев назад

Not on an axle. Only a stationary machine as far as I know

@waynetharp 5 месяцев назад

@@ohiowoodburner Copy...

@leonardryan8723 5 месяцев назад

Good evening joe , see your running 405 japa you should do 3 log truck easy in day . The own thing with the little machine the bar heat up and start to bend . Can’t take the heat cutting the wood 🪵 joe . Why iiiii iiiii try them little gear ⚙️ in the wood 🪵 yard . Stock a lot of bars went running it hard all day from sun 🌞 up 🆙 and sun ☀️ down . Think 🤔 I’m lied 🤥 put guy on the tractor 🚜 feed you logs 🪵 all day with out stopping if you got logs 🪵 to go all day . Remember STICK on the ICE 🧊, SAW in the WOOD 🪵 and RUBBER on the road . 😊 THINK 🤔 SAFETY and always put SAFETY FIRST . Like 👍 my father would say carry on BOYS !! 😢

@ohiowoodburner 5 месяцев назад

Stacking is still my bottle neck Len!!!!

@gillwest1155 5 месяцев назад

File the edges off the bar joe

@ohiowoodburner 5 месяцев назад

That's what I was thinking. I will give it a try

@gillwest1155 5 месяцев назад

It will definitely make a difference @@ohiowoodburner

@jamesmckay9966 5 месяцев назад

IT IS AMAZING HOW FAST IT IS. JOE....YOU ARE LOOKING SLIM AND TRIM. NO NEED FOR THE GYM.

@ohiowoodburner 5 месяцев назад

haha... not exactly true but I ill accept your compliment!

@user-om4yv7jh1i 5 месяцев назад

How much did that setup cost/

@ohiowoodburner 5 месяцев назад

www.metsamachines.com

@brandonhoad9033 5 месяцев назад

Just have that one dressed instead of blowing a bunch of $$$$$$$$$$

@ohiowoodburner 5 месяцев назад

Is that like a file you take to it?

@brandonhoad9033 5 месяцев назад

@@ohiowoodburnernot pants and shirt🤣🤣 .Yes, filing. There's a guide so that both sides will be flat and even. I 4get you're shop guys name, Sam? He'd be able to do it. TCs Outdoors did a video w one he got from the big river Co