This was by far the most dramatic unboxing I have ever seen! I was hooked till the end.. The life of this UV printer flashed before my eyes and I saw... everything.
I don't recommend this product. After setting it up, the stage stopped working the next day. The seller avoids answering about sensitive malfunctions. In the end, I returned it through Alibaba and am currently in a dispute with both Alibaba and PayPal. I have ordered a Roland printer and will be receiving it this week. It seems very difficult to find a good value and cheap Chinese UV printer.
After 1 year using this printer I don´t really reccomend it. It needs to clean head a lot. has lot´s of grain around the actual print. Prints are fine when you do massive fine tuning but otherwise it will always ask for some ink reset, small ink reset, pad is getting very dirty so you will have to clean it aswell. Do not use polypropylene to clean the rubbers it will melt them use pure Alcohol to clean the head and parts. White is a constant issue I can´t really get it to work 100% i just have to print it twice... like seriously I wanna throw it away already. Now I need to replace the motherboard or cables because after replacing the print head with a brand new one the grain is still there so i guess it´s a chip issue or cable etc... getting into some parts is also quite complicated. I have already replaced half of the printer... the belt was the first one to snap, waste ink pump, waste ink pad, print head, the software does not remember some setups like grid and last files so make sure you close it before you turn off the printer. But every time you open you have to set up the grid again (if you use it as me..) :) ... also big issues to make the software running under win 10...
@@JMePhotoLLC I also replied with some txt under this video i definitelyl do not reccomend to buy these machines they are poorly made and will break vry very fast...