Unlock the Secrets of the THINKDIAG 2: Full System Review 

Thinkdiag2 All System Bidirectional Control OBD2 Diagnostic Scanner amzn.to/3ntfm4R 737mechanic Amazon Store Front www.amazon.com/shop/737mechanic/list/CR3BU74FTDU1?ref_=cm_sw_r_cp_ud_aipsflist_aipsf737mechanic_W4QMHMJ1JD67FDBCQHRK

Note: You only get 1 Year of Free Updates online and 1 Year of Free 16 Reset Functions ECU Coding.

God help you if you need to get any support. It takes days to get a response, and even when you provide them with a clear explanation of the error they try to jump you through all kinds of hoops. Took over a MONTH to get a replacement dongle when the one they shipped was DOA. Upload screenshots, videos... etc. YEAH, IT'S DEAD SEND ME ANOTHER ONE. And then the replacement gets licensing errors, and they want all the same hoops again. VERY POOR SERVICE.

What features work after the one year free updates? I take it this is a annual subscription and not an update fee.

Could you test it with another diagnostic application other than the one that comes by default with the scanner? for example: diagzone (be careful, it is possible that it rewrites the firmware and can only work with diagzone).

Can thinkdiag do all this too? Or does it only work with thinkdiag 2?

Goodbye Snap-on and Bosch! These things are going to put them out of the scan tool business pretty quick I bet. I got one a week ago and am blown away by what you get for the price. I'm a career tech with 25 years of experience and I can tell you that this is an awesome unit so long as they don't play games with the update price after the free year is up. For Ford there is a programmable module installation option!! I did not find it for GM, you guys let me know what other makes and models this thing can program modules on. That is the real $ maker right there!

Unit capable of doing O2 sensor resistance learn reset on 2015 Chevy Cruze 1.4L? Nice video - thanks

does thinkdaig work for 2018 pathfinder to program a fob?

People who base the subscription rate is brand new to diagnosing cars. $5,000-$10,000 Autel, Alcateral, xtool requires you to pay $800-$900 to update the scanner. That fact that it can do everything that a $5,000 dealership ship can do for not even a 10th of the price and subscription is a no brainer

xtool's a30m is pretty comparable with lifetime updates also.

This thing looked really promising, but sadly, it would NOT scan a 2005 Bentley Continental GT even though emailing Thinktool, they did say that it should. Very strange. Did ALL of their troubleshooting too but to no avail. I went on to their community page within the app, and it seems like there are others with the same problem with their Volkswagens from all over the world (Bentley is on the same software), so it's not just me. Other than that, it scanned my 2016 Tacoma really well, but this uncertainty of whether it would or it won't kinda leads me wanting to return it. I'm still in that return period. Maybe order a replacement of the same? What do you think?

Thank you so much my guy

Do you have to pay for a subscription after the first year ?

I can't even sign up & register to Activate it... What frkin SCAM TOOL,,,Sending it Back!!

Hi ! Do you know how to clear history on THINKDIAG2 ? Please ! Thanks

Thank you very much man good job very nice. Sounds like you knowledge it’s good for cars. I think I wanna buy one the way you explain it help me out. I think I need one of these scanners. Thank you very much.

so after the first year you basically only have a OBD reader you then need to pay $150 a year to update it so I'm cheeper buying a new scanner ever year as you get a years free updates and sell the old one for $50 as a decent ODB reader Cool

This scanner can perform an ABS initialization?

Will it work on proprietary-only-scanner engines like the Cummins? If so then the yearly cost may be understandable?

But does it do keys well?

is it possible to correct miles with this thinkdiag 2, from the phone or tablet?

Great video. I have one on the way! Just replaced a BCM in my 2007 Avalanche. Do you think this will work to get everything in sync? Truck starts and almost everything works. Only issue is no gauges / System info on the dash. Ooh and power to radio stays on after turning truck off and opening door.

Nice video.Have you seen my letters about laser level?

thinkdiag 2，great tool

Will it read J1850 protocol

It’s great but updates are 159.00 ridiculous

how you can see the real millage on the vehicle?

I like to know if this can do 02 sensor test

Can you see the injector parameters?

28:30 software update will cost you any ride around $99 It's a little over a hundred bucks for it but they're always running specials constantly and you can get it for right around $99 give or take 10 20 bucks depending on how patient you are waiting for the next special I have the thing diag and I have the thing diag two and I have the thing driver correction I have the think car all modules I've had this for quite some time and very very impressed with it been a mechanic for I forget how many years but very impressive it as you are Good company all the way around good app a lot easier to use than most but you said you didn't know what the updates were would cost so I figured I'd drop you a letter and let you know and that's for the full software everything unlocked it'll be about 99 bucks You can do one vehicle manufacturer and it's a lot cheaper like the steak driver or think car that I've got It's a two manufacture module and had that for myself just for my two main vehicle manufacturers that I own and then you can open that up for however many maintenance functions that you want or all of them either or they're real flexible and getting cheaper as the months go by enjoy Good luck brother

Will it pull pin codes like the xtool d9?

Does this show the PID's when you use it for live data? eg transmission temperature?

Does anybody know how to correct odometer mileage

i have a thinkcar and just got a thinkdiag and thinkdiag2. Seems like with those smaller units, you'll be stuck with one make after the years over. otherwise it's 35 or 50 per car brand per year. That's an automatic fail. They're both going back.

Is this device works to reprogram any required software to the vehicle? Also if I installed any part in the vehicle and it need to be reprogram, can yhis device work it out and do it...?

it seems like this thing turns to a paperweight after it expires in year unless you renew. and nobody reviewing this on youtube is even mentioning it. so when the "subscription" expires after a year. you lose the ability to do a full diagnostic and system scan. also you lose the 15 maintenance reset functions. you essentially you can only do check engine and transmission scans. can anybody in here clear up this bullcrap?

What's the expiration date for? Was hard to tell but seemed that some of the car companies scrolling through your list had an expiration date, while others did not

is it good with bmw,mb , vw ? those brands got alot of control modules with special functions needed, can this tool scan all them effectively?

Does anyone have a clue how to program gear ratios to correct the speedometer. 2000 silverado went from 3.73to 4.10. The literature for this scanner says it will.

Can this devicento program a new key? If yes, how? I've got a new key for my Opel insignia...

I buy one and it's not support my car, paying for nothing

I have a P1745 hard code. It has put my 2015 Dodge Grand Caravan into limp mode. From what I understand, I need to reset VLP Counters to zero. Even after repairs the code won't allow the vehicle to function properly. Most shops are not aware of how to perform this reset and the one's that do want one hour of labor and a scan fee to eliminate the code. Will this unit reset the VLP Counter?