Unlocking the Secrets of Soldering: Few People Know About This Secret Of Soldering Iron And Salt 

Also watch this video 👇👇👇👇👇👇👇👇 ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-h6Nk3410JWY.htmlsi=W5Umi7e4vq-Lvq33

You know what would be better than music in a video like this? Some dialog explaining what you're doing, and why.

Perfectly fine to open a battery bare hands, take some acid in a bottle and do this on the counter, instead of a high quality, inexpensive flux. Anyone reading, don't do any of this please

Acid flux. Not great for electrical work because it continues working and will corrode after the solder joint is complete. Please consider 'no-clean flux' instead. Then immediately brush 99% alcohol on the completed joint to get rid of the flux.

Its always handy to know alternative ways of going about things but quick tip you should seriously consider tinning that tip

Maybe it isn't readily available everywhere, but paste type flux intended for plumbing is usually based on zinc chloride, inexpensive and typically works OK on stainless steel. However, as others have pointed out, zinc chloride flux MUST be removed to prevent what can become an essentially endless corrosion cycle. It should never be used for any electrical or electronic application. SOMETIMES it can be used in electronics for initial tinning of difficult to solder metals that are then cleaned thoroughly and subsequently soldered with a suitable non-corrosive flux. The real key to soldering stainless steel is to lightly abrade the surface with fine emery paper before attempting to solder. SS relies on the formation of (primarily) chromium oxide on the surface to impart the stainless properties. That oxide layer needs to be removed to facilitate soldering. Ordinary fully-activate rosin flux will often work just fine on SS if the surface is freshly prepared this way.

Kind of makes me want to solder and play the xylophone.😂

I think it was the magic pink spoon that did the trick.

Do NOT do any of this. It's toxic.

Why would you ruin a perfectly good s/steel ruler?

Cool stuff, lemon juice can also be used.

Wow that's very very good idea 💯🎉🎉🎉😮😮😮😮

Model railroader here. Been soldering brass track joints by the hundreds with regular No-Korode paste flux for years. No issues with corrosion. Once the joint is made I wipe it all clean with denatured alcohol.

Very handy to know... if I want to ruin a nice steel ruler

Cool to know you can make something like this from junk laying around, might be a day when thats all thats left

Looks like "spirits of salts" old soldering flux. You can get a better response using transmission fluid! Simple and easier.

Zinc Chloride, a standard soldering flux.

Nice, but you should mention that the smoke produced by the heat is really toxic.

Me for no reason: "Just gonna take a little battery acid in this syringe. Okay, see you guys later"

Just get sulpheric acid, add zinc and allow to cure. You can soft solder stainless and antimony too. No need to use a special measure stainless steel rule.

Mistake one is that you put it away "clean", without any solder on the tip.

I solder stainless steel by using phosphoric acid, it is a very weak acid and is easily washed off when you are done.

You are doing well dear friend.

Easier to just by acid core solder.......use it all the time.......biggest mistake with soldering is not having the iron hot enough before use

The acid from the battery is just about all is needed to remove oxidation to allow the solder to penetrate.

You made zinc chloride, a common acid soldering flux. It works, but is very corrosive.

Difference between safe and unsafe is sometimes difference between knowing what are you doing and not knowing.People keep saying the acid is not safe..Of course it's not safe if you pour it on your skin...A drop of it on some surface in a ventilated area its ok.Pine resin fumes are also unsafe..Playing with electricity if you Don't know what are you doing its also unsafe.

Good idiya ok

I have a small bottle of general purpose soldering flux from the local hobby electronics store and it works just as good, no need for alchemy lessons and dangerous chemicals in glass jars. Oh wait I just read it's contents it's mostly the same stuff.

You can buy a bottle of "BAKER'S SOLDERING FLUID" to get the same result.

Hay và hữu ích, đã bấm đăng ký kênh.

When I saw his bloody finger I knew safety wasn’t a concern of his. Lol

OR you could simply sand the area before soldering. Steel wool does the trick.

This is good info for someone (like me) that doesn't want to make a 20 mile trip to town just to find out no one has a product that you end up having to order online. Easily made with common household products.

This is super cool! ..but..Bro...you are KILLIN' me with that unlabeled water bottle filled with lead acid battery juice in it that looks exactly like water😂! Good job tho🤘

Exaggerated illustrations as the battery lead and salt are not at all required. Just the acid alone is enough to make the soldering strong.

Few people know of this "secret"???? HAHAHA....There is a whole industry built on this principle...

Why did you ruin that perfectly good scale?🧐

Cool but couldn't you just use some sandpaper or a file? I usually just wire brush the surface and it works most of the time. I'm pretty sure the acid is just etching the surface so basically just cleaning and ruffing up the surface will suffice.

Cảm ơn bạn đã chia sẻ video clip chúc bạn thành công.

I use Muric Acid and desolve a chunk of Zink in it, works great Just leave it outside until its finnished fizzing

In poor communities around the world this might work. For me, I buy some flux for $5 which last me 30 years. Nice educational video just the same... thanks

Wow u just said just salt! 🙂

Keep that advice in india😊

Kreeen banget bosqu, semoga sukses selalu

Its annoying music while watch video 😅

I have soldered copper wire to stainless steel by using a drop of Phosphoric acid at the joint. Made a nice joint and not dry.

Good job. Great video. Thanks

Every old school tattoo artist that was making their own tattoo needles knows this "secret"

Thank you for sharing 👍

This will eat your tip off & destroy your electrical work!

Here in Germany I used a product called "Löthonig" (soldering honey) some 20 years ago to get a perfect lead soldering of steel parts.

❤Very good ❤ good night sir ❤

Thanks zabardast

where is the salt😂😂😂

Very good thanks sharing

Nice experiment

Nice1..Inven & thank u

Zinc chloride solution? Wow!!!!! I never knew that in all my years of soldering. That will help me a ton the next time I need to solder to a large piece of metal that absorbs all the heat like a heatsink. I will clean it afterwards with 70 to 90% alcohol.

I like it if the connectivity of circuit keeps working using this self made acid

Yeah but how many times will I need to solder onto a ruler?

Just buy the right flux...

Tnks 👍

Thank you

I usually scape the are and the tin holds onto it well enough. I use it on battery connectors or other metal connectors. I am a hobby electrician, not professional though.

Çok güzel olmuş ellerine emeğine sağlık

Have you ever thought of just springing for the right kind of flux you need, save up some pennies and buy some flux!

Quá ok, đã bấm đăng ký.

So that's how they make ecto-cooler, huh... 🤔

Lekker gevaarlijk knoei werk werken met een zelfgemaakte zoutzuur verbinding en dan nog zonder bescherming werken ook 🙄 knoeier .

Good job

In the UK there is a highly acidic flux called ( A8 ) .... you can use this to soft solder stainless steel AND ! Nichrome wire ... the fumes are nasty , so do it OUTSIDE and wash the joint , especially if on a delicate electronic circuit .. and NEVER put the bottle in your toolbox , or your tools WILL go rusty .. ( tried - n - tested ) ........ DAVE™🛑

the tell tale this a usual backyard video job was the scissors with masking tape handles...

Thanks

Dangerous yes handy yes time place location friends.

I answered and said, "If I have found favor in thy sight, O Lord, show this also to thy servant: whether after death, as soon as every one of us yields up his soul, we shall be kept in rest until those times come when thou wilt renew the creation, or whether we shall be tormented at once?" 76 He answered me and said, "I will show you that also, but do not be associated with those who have shown scorn, nor number yourself among those who are tormented. 77 For you have a treasure of works laid up with the Most High; but it will not be shown to you until the last times. 78 Now, concerning death, the teaching is: When the decisive decree has gone forth from the Most High that a man shall die, as the spirit leaves the body to return again to him who gave it, first of all it adores the glory of the Most High. 79 And if it is one of those who have shown scorn and have not kept the way of the Most High, and who have despised his law, and who have hated those who fear the Most High -- 80 such spirits shall not enter into habitations, but shall immediately wander about in torments, ever grieving and sad, in seven ways. 81 The first way, because they have scorned the law of the Most High. 82 The second way, because they cannot now make a good repentance that they may live. 83 The third way, they shall see the reward laid up for those who have trusted the covenants of the Most High. 84 The fourth way, they shall consider the torment laid up for themselves in the last days. 85 The fifth way, they shall see how the habitations of the others are guarded by angels in profound quiet. 86 The sixth way, they shall see how some of them will pass over into torments. 87 The seventh way, which is worse than all the ways that have been mentioned, because they shall utterly waste away in confusion and be consumed with shame, and shall wither with fear at seeing the glory of the Most High before whom they sinned while they were alive, and before whom they are to be judged in the last times. 88 "Now this is the order of those who have kept the ways of the Most High, when they shall be separated from their mortal body. 89 During the time that they lived in it, they laboriously served the Most High, and withstood danger every hour, that they might keep the law of the Lawgiver perfectly. 90 Therefore this is the teaching concerning them: 91 First of all, they shall see with great joy the glory of him who receives them, for they shall have rest in seven orders. 92 The first order, because they have striven with great effort to overcome the evil thought which was formed with them, that it might not lead them astray from life into death. 93 The second order, because they see the perplexity in which the souls of the unrighteous wander, and the punishment that awaits them. 94 The third order, they see the witness which he who formed them bears concerning them, that while they were alive they kept the law which was given them in trust. 95 The fourth order, they understand the rest which they now enjoy, being gathered into their chambers and guarded by angels in profound quiet, and the glory which awaits them in the last days. 96 The fifth order, they rejoice that they have now escaped what is corruptible, and shall inherit what is to come; and besides they see the straits and toil from which they have been delivered, and the spacious liberty which they are to receive and enjoy in immortality. 97 The sixth order, when it is shown to them how their face is to shine like the sun, and how they are to be made like the light of the stars, being incorruptible from then on. 98 The seventh order, which is greater than all that have been mentioned, because they shall rejoice with boldness, and shall be confident without confusion, and shall be glad without fear, for they hasten to behold the face of him whom they served in life and from whom they are to receive their reward when glorified. 99 This is the order of the souls of the righteous, as henceforth is announced; and the aforesaid are the ways of torment which those who would not give heed shall suffer hereafter." 100 I answered and said, "Will time therefore be given to the souls, after they have been separated from the bodies, to see what you have described to me?" 101 He said to me, "They shall have freedom for seven days, so that during these seven days they may see the things of which you have been told, and afterwards they shall be gathered in their habitations." 102 I answered and said, "If I have found favor in thy sight, show further to me, thy servant, whether on the day of judgment the righteous will be able to intercede for the unrighteous or to entreat the Most High for them, 103 fathers for sons or sons for parents, brothers for brothers, relatives for their kinsmen, or friends for those who are most dear." 104 He answered me and said, "Since you have found favor in my sight, I will show you this also. The day of judgment is decisive and displays to all the seal of truth. Just as now a father does not send his son, or a son his father, or a master his servant, or a friend his dearest friend, to be ill or sleep or eat or be healed in his stead, 105 so no one shall ever pray for another on that day, neither shall any one lay a burden on another; for then every one shall bear his own righteousness and unrighteousness." .....2 Esdras 7:75 /////////////////

Fantastic explanation 👍🏼👍🏼👍🏼👍🏼👍🏼

Just make sure the lead/acid battery that you pinch the acid from is FULLY CHARGED. When a lead/acid battery is flat it contains only water. It becomes acidic when charging, and gets stronger as the battery charges.

Did I just watch the beginning of a shake and bake video that RU-vid hasn't removed yet?!🤣

Добре, що я живу у місці де паяльну кислоту можна просто купити в магазині, а не купляти батарейки та акумулятор, щоб зробити з них флюс.

1:32 bình màu cam là gì???

Its called spirit of salts, not new and used for years in the sheet metal industry by plumbers etc BUT its corrosive and has to be cleaned off which is not easy as it gets between sheets, absolute no no for electronics but OK for a SS rule etc

Да все это интересно но не хватает перевода?

Zinc (Zn) + Sulfuric Acid (H2SO4) → Zinc Sulfate (ZnSO4) + Hydrogen (H2) Zink ions clean the oxidized metal.

Is there any other way to fine lead acid battery liquid?

**My personal opinion** Removing acid from a good battery made me cringe a bit. I'm sure another alternative source could have been used.

Disclaimer: This method should definitely not be used on electronics or wiring as it will be corrosive. I was about to say that this method should only be used when soldering plumbing, but I don't think even that is a good idea. Pretty nifty trick! I'm wondering what function this would serve though? What did you use it for, Mr. Inventor Eye?

Or hey, you can get decent Flux in a day's less time that carving batteries and lead acid and salt etc. Besides it may break the bank at 3 dollars You can neutralize the acid with a little vinegar or baking soda if you're worried about continued corrosion

Akü suyunu normal suyami kattiniz yoksa sisedeki su akü suyumuydu.😊😊😊

Or just use a soldering flux syringe with needle for safety instead of getting acid from a battery

So, what was the point? How to avoid scraping ruler, which would take about 3 seconds?

Thanks God I thought you were going to drinking.🍸 😢

Fully work thanks Inventor..I subscribe your channel.

I'll remember this trick next time I want to ruin a stainless steel ruler.

Nice video and tip. But please, next time take care of your fingers

I like this idea, but a tad dangerous. Imagine the "one out of ten" who gets burnt by acid, or anything else. Could easily use a good flux. But, by your video, it done the job very quick, especially to a ruler like that. Maybe , for future videos, wearing gloves will give the 'one out of ten' out there, the nod to wear protective gear when dealing with battery acid - nasty stuff. Good video.

AKA "Five easy ways to poison yourself, or take an eye out! (and without even using a BB gun!)" LOL

nieces

any chemists feel like telling me if/how you can modify this processfor zinc plating? like would it be simple, inefficient, or practically impossible from that point?

Про ортофосфорную кислоту не слышали?