Unveiling the Hidden Secrets of DC Isolators 

did i miss something? what's the hidden secret?????

Was expecting this to actually be more of an explanation of how dc isolators differ from ac. No real secrets shown just an install..

Glands are different ! I so wish manufacturers would loose the knockouts, nobody actually knocks they out as you always crack the wrong ring. It would give you many more options

Nice to see you guys using flathead screws to mount the unit! As they weaking the plastic which leads premature collaps... Next time use dome head with a flat bottom. My former boss learned that lesson the hard way mounting Brightwell soap and paper towel dispensers in high risk areas.

all i heard was joe telling us about no such thing as a torque calibrated arm...

Why feed the first set of wires from the top, down underneath, then into a pole that is switched with a link back to the outgoing wires, (next to the incoming wire (running down & up)) & exit underneath the switch. Some may claim you are sharing the DC current across 2 switched poles - even though the switch is rated on all 4 poles inside... But you could have run the top wires into 1 pole - with it's link to pole next to it, then the incoming wire is sharing the load across two poles - which exits on a wire sharing two poles to the inverter - leaving the lower links intact that was removed. Finally ALWAYS TRIPLE CHECK DC switches POLARITY as some like Stag/IMO have the switches poles arranged diagonally & not straight down like you might assume to be common to all switches. Unveiling the hidden secrets ??? Click-bait headline - leave this stuff to Artisan chaps

Ferrules on gated terminals?

Switch that turns 0/I. In another news.. Water, wet.

4 terminals.. Is that a 3 phase + N isolator?😭😭😭

Those stuffing glands seem overpowered

Where's the conduit

Important to note lSOLATOR Not cuircuit breaker

Whats the clip-ons in the last second of the vid?? That was the only interesting thing

Naic

Boring.... Again

The fact that he is working with dc wire and using black color cable for positive wire

DC should scare you.