Upcycling Aluminium Cans Into Junk Journal Treasures

Подписаться 27 тыс.

Просмотров 72 тыс.

50% 1

Hello everyone! Here's another upcycling "trash to treasure" video for you! Today, I share how I recycle aluminium cans to make different embellishments for my junk journals and mixed media pieces. I hope you enjoy watching!
▶️ Join our Facebook group "Crafting with Saacibo" link / 369382692089885
▶️ You can navigate through my video with Timestamps:
00:00 Start
01:45 Cutting them open
05:22 Embossing
07:09 Cutting with dies
14:34 Painting Options
16:56 Painting
28:46 Making Things
43:22 Outro
Mentioned Video:
☆ Junk Journal Flip Through - Mystic Purple - • Junk Journal Flip Thro...
☆ Making Unique Junk Journal Ephemera from Recycled Packaging - • Part 1 - Making Unique...
▶️ Link to free downloads ▶️ saacibo.com/downloads
Charms Tutorials:
☆ Diy Display for Charms and Dangles - • Diy Display for Charms...
☆ Making Charms for Junk Journals from Recycled Plastic Loyalty Cards - • Making Charms for Junk...
☆ Making Charms for Junk Journals from Recycled Packaging - • Making Charms for Junk...
☆ Spool Tag Charms For Junk Journals From Scraps - • Spool Tag Charms For J...
☆ Charms & Paperclip Dangles With Faux Leaves - • Charms & Paperclip Dan...
☆ DIY Charms with Sea Shells and Cabochon Bases - • DIY Charms with Sea Sh...
I hope you enjoyed my video and found it inspirational. If you liked it, please check out my other videos and make sure to like and subscribe to my channel and ring the notification bell 🔔 so you can be notified of all future content. Don’t forget to share with your friends and family. I would love to hear your thoughts, so comment down below. Thank you so much for stopping by. Stay safe and take care. 😍😘
👉Subscribe Here: / @saacibo
My links:
☆ Instagram / saacibo
☆ Etsy: saacibo.etsy.com
☆ Pinterest: / saacibo
☆ FB: / saacibo
☆ FB GROUP - CRAFTING WITH SAACIBO / 369382692089885
☆ TW: / saacibo
☆ W: www.saacibo.com
☆ E: contact@saacibo.com
☆ MY AMAZON STORE amzn.to/3wVpKav Here you can find some of my favorite products & tools. This is an affiliate link, and I earn a small commission from sales at no extra cost to you
●▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ ❣️ ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬●
Comment ✔ Like ✔ Share ✔ Subscribe ✔
●▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ ❣️ ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬●
☀Relevant Hashtags:
#budgetcrafting #mixedmediatechniques #saacibo

Хобби

Опубликовано:

28 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 415

@tamielizabethallaway2413 Месяц назад

You are literally the Queen of Charms! Everything you make is lovely, but you definitely excel at charms. No matter what old thing you cut up to make them, they always look so professional and shop-bought. I love your voice and the way you pronounce your English, and watching you work is so soothing because you're very "calm" and your voice turns almost to a whisper when you're engrossed in the process. Alice can have her Queen of Hearts... ...but we have our Queen of Charms! 👸🤗😘💖

@TubeYouLena Месяц назад

Yes, exactly, Dragana is the Queen of Charms!

@Saacibo Месяц назад

Aww, your comment is gold! Thank you so much ❤️❤️❤️

@jannellcook5772 Месяц назад

P p p

@RockyRoadCreationsbyDiana Месяц назад

My husband found a huge roll of thin copper at a yard sale, and I've been cutting and embossing ever since. That was over 10 years ago. I'm getting really low, so I will be using our aluminum cans next. You are doing an amazing job with this. If you ever get any thin copper, try the same thing, then put it in Miracle gro plant fertilizer Mixed with water and beautiful verdigris will gather in the nooks and crannies, creating beautiful works of art. I love this video.❤❤❤

@Saacibo Месяц назад

Oh wow! Thank you so much for sharing that amazing information with me. I have some wide self adhesive copper tape that I’ve never used. I am excited to try your technique with miracle grow!

@RockyRoadCreationsbyDiana Месяц назад

@@Saacibo Remember to emboss the copper. It's such a fun technique. If you have any questions, just let me know.

@user-uq5ie8ot7h Месяц назад

A brilliant idea. Thank you for sharing.

@inaboucher144 Месяц назад

I love how you take the time to test all the options and share your creativity with us. You never disappoint. Hugs and stay well.

@Saacibo Месяц назад

Thank you so much! ❤️❤️❤️

@junerobbins6871 Месяц назад

I like how you made the charms not sharp.

@jillcrapo7159 Месяц назад

You can get more of a textural “rust” if you use a light coat of glue and sprinkle with cinnamon powder.

@Saacibo Месяц назад

Thank you for the tip! 😊

@LeticiaUPC Месяц назад

You can use gardening gloves for a bit of protection. I use these cans for jewelry 😉

@Saacibo Месяц назад

Great idea! Thanks for watching ❤️

@sandramedina1517 Месяц назад

Wow! I did not know there was such a machine. I'm getting one for myself and granddaughter. I love recycling aluminum cans and making junk journals. Thank You for sharing. You are a awesome!

@Saacibo 26 дней назад

Thanks so much for watching! ❤️❤️❤️

@user-by2yl5wi6x 20 дней назад

What is this machine call and how could I buy one I’m encouraged and can’t wait to get this kind of machine thank you help ! God bless

@406annie 8 дней назад

It’s a Big Shot embosser. There are other, smaller sizes and manufacturers, but I have this same one and LOVE it. You’ll have so much fun with it!

@VeganDoris 20 дней назад

This is so clever! I never thought I would be able to run an aluminum can through my machine!

@Saacibo 19 дней назад

Thank you so much for watching ❤️😊

@bette-annflood835 Месяц назад

The tops from sour cream dig foods or any of the aluminum sheet type tops can be used doing this. I made several from the aldi dog food tubs. I love how they all turned out.

@Saacibo Месяц назад

Sounds great and much easier than cutting the can open! Thanks for watching 😊❤️

@nelidacristinasgrignuoli7477 21 день назад

@@SaaciboBuenas tardes acabo de ver las cosas maravillosas que haces, podrías decirme como sr llama la máquina que utilizas, desde ya muchas gracias. ❤❤

@Saacibo 21 день назад

@@nelidacristinasgrignuoli7477 thank you! The machine is called Sizzix Big Shot. 😊

@susaneddins4299 Месяц назад

More great ideas. Love these and so pretty. My recycle/trash bin will forever be empty, LOL, with all the wonderful ideas you inspire us with.

@Saacibo Месяц назад

Thank you so much! ❤️❤️❤️

@norabishay2888 Месяц назад

Beautiful charms. Thank you. I tried long time ago a similar idea I dont have all these colours, but i found that if you heat the aluminium or burn it over the flame of the stove carefully the silver colour of the can will become gold then will turn bronze with all its grades . I liked the result

@Saacibo Месяц назад

Wonderful! Thanks so much for sharing that with me. I would love to try this 😊❤️

@margaretford1011 Месяц назад

I started cutting up cans like this a few months ago when I realized how thin the walls of Pellegrino Essenza cans are. I found that if you rip off the key on top (so it doesn’t get in the way) you can use an Oxo type can opener on the side edge of the top to get the top off. Then I just use a utility shears (or pruning scissors) to cut down the side and then work around the bottom to get that off. It is a whole lot less dangerous than using a craft knife.

@Saacibo Месяц назад

Great tip! Thanks for sharing this information with me and everyone. 😊❤️

@franb1448 Месяц назад

Thanks for sharing this!

@TubeYouLena Месяц назад

This week this is a second revolution in the world I love to escape to. The first one was in yesterday’s video of Treasure Books channel (backing up magazine images with no glue, project 12). In this video the material and creations made of it are both extraordinary. I am afraid to cut myself and aluminum cans do not enter my house (and if they do, in my province in Canada we bring them to the bottle depot to get the deposit money back). But still, super interesting. I wonder if I can do something similar with several layers of heavy-duty foil I use in my cooking… Need to try that.

@Saacibo Месяц назад

Unfortunately, cutting up the cans is a bit of a risk. A few people mentioned in the comments that they like to cut aluminum trays, the ones that are used for baking. I haven’t tried with those, yet. Aluminum foil is thin but perhaps gluing it first to card stock and then cutting might work. Thank you so much for watching and for your kind comment. I appreciate it very much ❤️❤️❤️

@luciafernandezfreile5795 Месяц назад

Super, genial !!!, tienes una nueva suscriptora a tu canal. Gracias

@AnBePe 18 дней назад

@@SaaciboCon un abrelatas no más que cualquier otra idem.

@AnBePe 18 дней назад

@@SaaciboCon un abrelatas no más que cualquier otra idem.

@406annie 8 дней назад

This is a brilliant idea, and well executed! I love it! Thank you!

@Saacibo 7 дней назад

You're so welcome! Glad you liked it 😊❤️

@keitheddie5 Месяц назад

Your voice and way of speaking are so soothing. Beautiful work!

@Saacibo Месяц назад

Wow, thank you so much! ❤️❤️❤️

@sandyhamilton2768 26 дней назад

When I’ve watch yr videos I do it for a second time when I want to sleep, your voice a is the voice of an angel and it often puts me to sleep 😴

@user-gm6bt9vv7q Месяц назад

Thank you so much for sharing all your wonderful ideas with all of us, I will certainly have a go with some aluminium. What you make are so lovely and I would not have thought to put it thru my Sizzix so thank you for that.

@Saacibo Месяц назад

You are so welcome! Glad it was helpful! Thank you very much for watching and for your kind comment 😊❤️

@jeankessler8568 Месяц назад

Already paused your video to dig out cans from the recycle bin...😂 and you just finished showing how to open out the cans. Your work is beautiful.

@Saacibo Месяц назад

Thank you so much! Glad you enjoyed it 😊❤️

@chantellucky4565 Месяц назад

What a great idea!!! You are just so creative!!! Love it!!!❤️

@Saacibo Месяц назад

Thanks so much! 😊❤

@DonnaNichols-ep5de Месяц назад

Beautiful, creative, and environmentally thoughtful... What could be better than that??? Thank you❣️😁🌿

@Saacibo Месяц назад

You’re so welcome! Glad you enjoyed it 😊❤️

@kellyhardy7695 Месяц назад

I had no idea you could make embellishments from aluminum cans. WOW! Thank you so much for sharing your creativity and Upcycling with us. I will definitely give this a try. You now have another new subscriber.

@Saacibo Месяц назад

Hello and welcome! Glad you enjoyed the video. Thank you so much for watching and subscribing. ❤️😊

@lightbulbnirvana Месяц назад

Hello, Aluminum doesn't rust, so you would be waiting a long time for rust to show up. Rust is oxidized iron. Thanks for sharing your process though! Lots of good ideas, ❤

@Saacibo Месяц назад

You’re very welcome! Glad you liked it. Oh, I know the aluminum doesn’t rust but I was hoping when I placed it in the rust it might stick to it, as in color it. The same way I dye papers with rust. To my disappointment it just slid off, it wouldn’t stick to it at all 😊

@lightbulbnirvana Месяц назад

@@Saacibo Yes, this is why airplanes are made from aluminum, so they don't rust and because no metal sticks to it, making airplanes aerodynamic. I do think aluminum patinas, but it's a white crusty film that isn't very interesting and hard to see..

@jennip8585 25 дней назад

Actually, you could use cinnamon. That would look like rust🤷🏽‍♀️✨

@CraftedByChristyShop Месяц назад

I'm soooooo happy you made this video! I haven't even watched it all yet, but I was so ecstatic when I saw what it was about 😊 I am the same about worrying about getting cut. I have been trying this for awhile now, and decided I better stop before I cut myself, as I'm pretty accident prone lol your projects are beautiful! Thank you

@Saacibo Месяц назад

You’re very welcome! I’m glad you like it! Oh, I am accident prone, too. Especially if I get too immersed into my work. I have to stay grounded when I work with metal, and that is so hard sometimes. It’s the same as being very sleepy but wanting to stay awake 😊❤️

@creative_panda_system2852 Месяц назад

I have been doing up cycling for a few year and I remember when started doing this with all the Pepsi cans I had all over. It can be sharpe so I just run around the edges with some sandpaper as well to help with the sharpness. ❤

@Saacibo Месяц назад

Great idea using sandpaper. Cans can be very sharp and should be handled with care 😊❤️

@AnitaStone-ml3js Месяц назад

That's why I love my big shot,will cut more than paper

@Saacibo Месяц назад

Yes! I love it because it’s so versatile! 😊

@monicabuckingham9475 Месяц назад

Ive used tomato puree tubes in the past but they are thicker than drinks cans and very sharp. They are a sort of rose gold colour 😊

@Saacibo Месяц назад

I never thought of that! Thanks for sharing. I wonder if they can be cut with dies 🤔 I guess I have to try 😊 Thanks so much for watching ❤️

@monicabuckingham9475 Месяц назад

@@Saacibo When I used the tomato puree tubes I didn't try but steel rule dies might work ☺️x

@lizzyanthus1 16 дней назад

What amazingly gorgeous things you have made! I couldn't afford a Sizzix so bought a mini die cutting machine from Temu, that works beautifully. Got a lot of aluminum cans as well. Guess what I'll be playing with today, thanks to you! Yes, I'll try to be very careful, thank you. 😁

@Saacibo 11 дней назад

You’re very welcome! Glad you liked the video. Any die cutting machine would do, doesn’t have to be Sizzix. Hope you have lots of fun creating 😊❤️

@charlarp 18 дней назад

Wow! This was so inspiring! They are all so beautiful

@Saacibo 16 дней назад

Thank you so much! 😊❤️

@kimjackman1722 Месяц назад

All are awesome! i love how the inks on the anchor make it look like an ocean relic. btw, aluminum won't rust, it will just oxidize to a dingy whitish gray...

@Saacibo Месяц назад

Thank you so much! I suspected it wouldn’t rust but I guess I was hoping it might become colored in the same way like paper does. To my disappointment, nothing happened. Rust just fell off. Luckily, inks work well 😀❤️

@kimjackman1722 Месяц назад

@@Saacibo Lol, yes the ink is great! Just wanted to save you the time of trying to make it rust. I also saw a faux rust technique where they mixed cinnamon with glue, i think, maybe was gesso, then heated with a mini torch, and it bubbled & burned then looked all textued and awesome! I'm guessing you should laquer it afterwards....

@agnes-catscrap 24 дня назад

Just... incredible ! Thanks a lot for your explanations so clears

@Saacibo 20 дней назад

You're very welcome! ❤️

@deborahreeder7374 29 дней назад

Great ideas. Years ago when I started doing this, the cans were thicker. Since they're thinner now, I put wax paper between the dies and the can, which helps the die cuts come out easier and with less damage.

@Saacibo 26 дней назад

Great tip! Thank you so much for watching 😊❤️

@jennylawson1980 Месяц назад

I love what you do, and how you think and create. I love these ideas and most definitely will be working with them. Thank you for sharing

@Saacibo Месяц назад

You are so welcome! Glad you enjoyed the video. Thank you very much for watching 😊❤️

@dixiebarton3593 Месяц назад

Fabulous and informative video !

@Saacibo Месяц назад

Thank you so much ❤️

@thecrafteaneighbor5177 Месяц назад

I have done the embellishing of aluminum cans, but have not die cut from them. Good to see that can be done, too! Awesome! Thanks! ❤😊

@Saacibo Месяц назад

You’re very welcome! Glad there’s more of us willing to risk cuts and injuries for our art. Thanks so much for watching ❤️😊

@beasaroseco5840 Месяц назад

Fabulous idea. I have a die cutting machine. This is great. 😊

@Saacibo Месяц назад

Glad you think so! Thanks for watching 😊❤️

@vamps_rock Месяц назад

I have some disposable roasting trays I used for coffee dying paper in but no longer need. I just cut them up a few days ago to use with embossing folders... charms are def top of my list now!!! TFS 😊

@Saacibo Месяц назад

You’re very welcome! Glad you enjoyed the video! Aluminum roasting trays are great for this, too. Thanks so much for watching ❤️

@nadinepalmaerts3197 Месяц назад

Great project ! Love these beauties. And I would also wear ears protections 😂 Ow... That sound when you cut the can... 😝😖 Thanks so much for sharing your talent and ideas 👌🏻

@Saacibo Месяц назад

Thank you❤️ Oh, I hated that sound, too. It made my teeth hurt 😆

@StrayMementos Месяц назад

Weirdly I'm the exact opposite, I'm loving the sounds 😂❤

@valeriesmith3388 24 дня назад

This is so creative! I love what you have created and now I'm thinking of the plastic bottles and jars i have. Might experiment this way with them.❤

@Saacibo 20 дней назад

Yes, most dies work on thin plastic, too! Thanks so much for watching 😊❤️

@connienielsen9201 24 дня назад

Wauw! Fantastic. Thank you 👍🥰

@Saacibo 20 дней назад

You’re welcome 😊❤️

@wandawalters3516 Месяц назад

What great ideas! I never thought of using aluminum cans to make things! I can't wait to try it!

@Saacibo Месяц назад

Thank you so much ❤️😊

@SteffiCullen Месяц назад

What a clever idea to use these cans. I love your inventive experiments 😇 And it's funny what an impulse this idea came from... to sharpen the Sizzix 😁😂🫶 So cool 🧡 All the results are beautiful as well!

@Saacibo Месяц назад

Thank you so much Steffi! ❤️❤️❤️ Oh, the things we come up when we just play and experiment 😆😆😆. Just go with the flow- that’s my new motto. I wonder how much more abuse my sizzix machine can take from me. I don’t think I tried cutting wood with it, yet 😂😂😂

@SteffiCullen Месяц назад

Hahaha... Wood 😂for sure 😂 probably she says "it was very nice with you, but now I have to go" 😂😂😂

@jodiecleman1344 Месяц назад

P.s. love this idea with the cans.

@Saacibo Месяц назад

Thank you! ❤️

@babsinoz Месяц назад

Very interesting the way you did these

@Saacibo Месяц назад

Glad you think so! Thanks for watching ❤️

@loribecker4403 Месяц назад

Fun! Fun! Fun! Drink up! You always have such a variety of techniques/twists to make the same thing look so different. Thank you for sharing your talents 😍

@Saacibo Месяц назад

You are so welcome! Glad you enjoyed the video. Thanks for your kind comment and for watching ❤️😊

@celinagolo Месяц назад

Thanks for sharing all the wonderful tips with aluminum cans - economical and beautiful. 😃

@Saacibo Месяц назад

You are so welcome! Glad you enjoyed the video ❤️😊

@begosanchezfotografia9304 Месяц назад

Wow, I love those beauties¡¡¡¡¡¡. Could you make a video showing how sizzis and cricut differ?. Thanks ❤

@Saacibo Месяц назад

Thank you! I have cricut but I don’t use it very often. Mainly just for stencils. I’ll think about it some more 😊

@user-qu6si2wq8y Месяц назад

Thank you for taking the time to create this video and share your knowledge! xox Lynn

@Saacibo Месяц назад

You are so welcome! Glad you enjoyed it ❤️

@rebeccabodine413 19 дней назад

What clever clever ideas ‼️

@Saacibo 19 дней назад

Thank you ❤️

@carolm9451 Месяц назад

So awesome, although I used my Sizzix to emboss the cans before, never thought to use the dies to cut them, am excited to give it a try, thanks D for another great tutorial!! 💜💜💜

@Saacibo Месяц назад

You’re very welcome! I’m glad it was helpful! Thank you for watching ❤️❤️❤️

@francedumont8103 27 дней назад

Wow ! Quelle bonne idée ! Et j'ai déjà tout cela sous la main. Merci beaucoup de la partager.

@RieNelson12 Месяц назад

Fantastic ideas and well presented, thank you.

@Saacibo Месяц назад

You're very welcome! Thanks for watching ❤️

@angelagreaud9695 24 дня назад

Such a great video! I have almost all these same dies... I know what I will be doing tonight... binge watching more videos..and then I get to make some on my craft-cation next week! Thanks so much for sharing- new subscriber!

@Saacibo 19 дней назад

Hello and welcome to the channel! Glad you enjoyed the video. Thanks so much for watching and subscribing 😊❤️

@jennip8585 25 дней назад

I'm only 9 minutes into this video, and I've already learned so much.❤

@Saacibo 22 дня назад

I’m so glad! Thank you for watching 😊❤️

@juliaclark1 Месяц назад

You are so smart! I would have never thought of this!😊

@Saacibo Месяц назад

Thank you so much for your kind comment 😊❤️

@luvs2knit1 2 дня назад

I just stumbled upon your channel and found this very interesting and well explained. I liked how calm and thorough you were! I can’t wait to check out your other videos! I’ve also liked and subscribed! Thank you for sharing.

@Saacibo 6 часов назад

Hello and welcome to the channel. Glad you enjoyed the video. Thank you so much for subscribing. I appreciate it ❤️❤️❤️

@faymeowsiumo Месяц назад

Thanks for sharing, love this project

@Saacibo Месяц назад

You are so welcome! Glad you liked it. Thanks for watching 😊❤️

@tammyandkiki 18 дней назад

Very cool and clever! Love it! TYFS❤

@Saacibo 16 дней назад

You are so welcome! Thank you for watching 😊❤️

@marlenewaldbauer4077 Месяц назад

I love your beautiful designs.

@Saacibo Месяц назад

Thank you so much 😊❤️

@carlenegilpin261 Месяц назад

Love your projects.Thank you for sharing this.😀

@Saacibo Месяц назад

You are so welcome! Glad you liked it ❤️😊

@ethellewis4988 Месяц назад

LOVE YOUR TECNIQUES !!!!!

@Saacibo Месяц назад

Thank you ❤️😊

@lauradellepoirier8559 Месяц назад

Awesome project tutorial. Thanks so much for the fantastic tips❤❤

@Saacibo Месяц назад

You are so welcome! Glad you enjoyed it 😊❤️

@summerrain2362 23 дня назад

I found a mini cutting machine like this on Amazon. Nice art 😊

@Saacibo 19 дней назад

Awesome! Thank you! ❤️

@PerfectlyImperfectJunkJournals Месяц назад

You always have very creative ideas. Love this and can't wait to try it. Thank you for sharing! 😊

@Saacibo Месяц назад

You are so welcome! Glad you liked it ❤️

@Cyrilmc222004 Месяц назад

Thank you so much I really really enjoyed watching you create these amazing and stunning pieces. I’ve used tin cans for cutting deferent things but I’ve never used anything to colour them with. Great work and so useful too. Please stay safe and well too xxxx Mags ❤❤❤❤

@Saacibo Месяц назад

Hi Mags! Glad you enjoyed the video. Thanks so much for watching and for your nice comment ❤️😊

@ninaanns7226 Месяц назад

Love love love this 💕

@Saacibo Месяц назад

Thanks so much ❤️

@MariaGonzalez-in6ny Месяц назад

Thank you for sharing your projects with us. I enjoyed all of them, but the anchor one took my heart.

@Saacibo Месяц назад

You are so welcome! Glad you enjoyed the video 😊❤️

@topazfire974 Месяц назад

I saw your thumbnail in my recommendation videos , I had to check it out , just a few seconds in I subscribed and hit the like button 👍

@Saacibo 26 дней назад

Awesome! Thank you so much ❤️❤️❤️

@susicave6542 Месяц назад

Oh my! These are absolutely fabulous! Can’t wait to have a go - just need to go get some beer cans so I’ll probably end up a bit drunk lol. Thank you for sharing. ❤️

@Saacibo Месяц назад

Thank you so much! Glad you liked the video. Oh, if you have some beer please wait till tomorrow to craft so you don’t cut yourself. Or, get someone else to drink, lol. 😆

@donnaphelan3108 Месяц назад

Very Cool!

@hsuanlin0227 Месяц назад

These are beautiful !

@Saacibo Месяц назад

Thank you so much ❤️😊

@janiceblough Месяц назад

This is really a great video! Thank you!

@Saacibo Месяц назад

You're so welcome! Thanks for watching ❤️

@abijahdixon2771 Месяц назад

Love it! I newvr thought of doing that with aluminum or my diecut machine, I wish my machine wasnt so small. I have been hoarding my tin cans for an art project but I think your idea is wayyyy better! Mine is still in process so i dont want to share what it is lol!

@Saacibo Месяц назад

Glad it was helpful! Thanks for watching 😊❤️

@jewels64628 18 дней назад

What a great video ! You’re actually making beautiful & unique pieces that have the potential of having many applications. I love the idea of getting out your sizzex machine to make gorgeous patterns with embossed pop cans ! Keep the ideas flowing ! Many thank you’s ! Julie

@Saacibo 16 дней назад

You’re very welcome! Glad you enjoyed the video. Thank you so much for watching and for your kind comment 😊❤️

@LynneWright Месяц назад

My friend Shellie has a video from years ago making jewelry and charms from soda cans and tins and her video got me started. There are some really neat floral and other patterns on some cans for teas and soda. The aluminum is hard on your cutting dies though and wears them out eventually.

@Saacibo Месяц назад

Thank you so much for watching and for the advice. I appreciate it ❤️😊

@JeanandKenny Месяц назад

New sub! This is a fantastic idea :) I love the charms, but that cross-hatch embossing is great for a 'guy' card front. My brother is a car/truck guy and this will be just the ticket for his birthday card. I have so many dies that I never use, so now I can use them for charms.

@Saacibo Месяц назад

Thank you so much for watching and subscribing! Glad you enjoyed the video 😊❤️

@wildfireswildfires6792 29 дней назад

ASMR charm 😊

@ireneharrison7630 Месяц назад

Love this idea!

@Saacibo Месяц назад

Thank you! 😊❤️

@user-do3qo9ev9z Месяц назад

I just stumbled across your video and I am so glad I did, it was exceptional and so informative and inspiring thank you❤

@Saacibo 26 дней назад

You are so welcome! Glad you enjoyed it 😊❤️

@jamieshipley2984 Месяц назад

Lovely to be able to see the WHOLE process. Very good tutorial.

@Saacibo Месяц назад

Thanks so much 😊❤️

@cindyfromsydney7693 Месяц назад

Very clever!

@Saacibo Месяц назад

Thank you so much 😊❤️

@gaylesankey402 Месяц назад

Wonderful ideas!

@Saacibo Месяц назад

Glad you think so! Thanks for watching 😊❤️

@craftnm7225 Месяц назад

Great ideas! Thank you.

@Saacibo Месяц назад

You are so welcome! ❤️

@elainemartinez1778 Месяц назад

Love love this!!

@Saacibo Месяц назад

Thank you ❤️

@karenraabis5296 Месяц назад

Amazing and creative!

@Saacibo Месяц назад

Glad you think so! Thanks so much for watching ❤️

@snnysnflwrgrl3835 25 дней назад

If anyone is concerned about cuts, one could wear protective gloves. Everything turned out so nice and pretty! thanks

@Saacibo 20 дней назад

You’re welcome! Thank you for watching 😊❤️

@kimberlymolitor354 Месяц назад

These are amazing ideas!! I was cringing at first, hoping you didn't get cut, but really liked how careful you were.🥰🥰🥰

@Saacibo Месяц назад

I surprised myself that I got away from this without a scratch 😆 I am a bit clumsy sometimes. Thanks so much for watching ❤️

@bl0tt44 Месяц назад

just discovered and subscribed to your delightful channel. aluminium doesn't rust, only metals with iron rust xxx

@Saacibo Месяц назад

Thank you so much! I appreciate that. 😊❤️

@jodiecleman1344 Месяц назад

Try putting toilet bowl cleaner on one for a few hours see if that works. I’ve seen people do that with sheet metal .

@Saacibo Месяц назад

Great tip! Thanks ❤️

@bette-annflood835 Месяц назад

I really don't think aluminum will rust. Iron will though..

@danacolosimo5874 Месяц назад

Wow love these … just came across your channel and love what you do 😊 can’t wait to give this a try😊 thank you for sharing 😊😘❤️😍🇨🇦

@Saacibo Месяц назад

You’re very welcome! Glad you enjoy my channel. Thanks so much for watching ❤️😊

@christinerodgers6020 Месяц назад

Love this project I have done this in the past also I have used foil card to get the effect ❤

@Saacibo Месяц назад

Hi Christine! That’s wonderful! I haven’t tried it with foil card, yet. I have to try! Thank you so much for watching ❤️😊

@Cooky_5580 Месяц назад

You make me so excited to get all my supplies out and experiment! I love all your ideas.

@Saacibo Месяц назад

I'm so glad! Thank you very much for watching and commenting 😊❤️

@junerobbins6871 Месяц назад

I love these. The alcohol ink is my favorite. I also love the blue and white star. Itscreally petty!!

@Saacibo Месяц назад

Thank you so much ❤️😊

@trinapatterson8872 Месяц назад

Love these ideas….

@Saacibo Месяц назад

Glad you like them! Thanks for watching 😊❤️

@sherryvanderpool8644 Месяц назад

Love this must try ❤

@Saacibo Месяц назад

Hope you do! Thanks for watching ❤️

@cherriberri7161 Месяц назад

Absolutely brilliant! Now all our empty soda cans can be utilized for ephemera pieces. Thank you sooooo much for sharing! (PS: we can always wear loves while cutting the cans.)

@Saacibo Месяц назад

You are so welcome! Glad you enjoyed the video. Thanks for watching ❤️😊