Hi moustafa Inhave citroen c5 x7 (2013) i have update screen system, the problem, screen is always restarting and when happend this all mutlimedia and parking radar not works, i cant find ant video or solutions! Do you have any idea about this?
Hi Moustafa. Great video :-) Just one question before I attempt the update. Will this work on a Citreon DS4 2011? I can't seem to find any info on the type of system installed in my DS4
Hi. Very interesting. I have a 2009 C2 and want to add cruise control. I see the connector to plug in the control stalk on the left lower position of the stalks. I have ordered the switch stalk to fit. Can you please advise how I can activate the cruise control? It has a speed limiter button but not sold with cruise from the factory. Thanks
Hi Mustafa, Thank you for the information. I need to update NAC for Peugeot 508 Model 2021. The system available is dated 17/09/2019. I need to make sure that wireless projection is enabled for android auto.
Hi Mustafa, Like your video. I have 66 REG Citroen C4 Grand Picasso & Followed your instructions to the tick. It has updated the Firmware fully & completed. But the MAP is not updated? Could I message you for help with more information? Again Thanks
Hi dear colleague, so i have a problem that the RNEG-RT6 Magneti Marelli of my car Peugeot 508 model 2012, it not booting, i have the screen black and the CD player sometimes buzzes. So if there are free softes to upload , you are pleased to help me. Best regards!
Following. I have a 2013 Peugeot 5008 1.6 ehdi in which the radio and gps quit working. Radio and gps don't come on and radio only makes a whirring sound every 15 seconds. There is a little light on gps. I was told it's likely the firmware malfunctioning. There is no sd input in radio, there us only a usb in the middle compartment. Can I still do a firmware update in these circumstances, and with a usb key..? Thank You..!
hey i have the new 208 gt line 2020 with rss ( not nac ) what can i do to make navigation work withoud apple Carplay? why i dont have antena/gps in my car? maybe you can help with your knowlege? thank you
GPS is hardware part inside your card display and you can't use navigation without the gps part, android auto or carplay it's just software which use gps part from your phone so no way
فيديو رائع. احتاج الى استشارتك. عندي سياره ٥٠٨ موديل ٢٠١٢ ولا يوجد عليها خرائط مصر. هل يمكن تحديث نظام الخرائط او النظام بصفه عامه؟ احتاج الى المشوره. لك كل الشكل
Hello dear friend. I have a question. I changed my rcc to nac infotainment system on my peugeot 3008. Now mypeugeot application doesnt synchronise with car. As far as I know nac/rcc and mypeugeot App synchronise with car's vin number. I think I need my nac's (it s a used one) ex vin number to use on mypeugeot app. But it is impossible get this vin number from supplier. Do you think every nac includes the primary car's vin number in it? Is it possible to find vin number from nac serial number?
Hi Moustafa, I have a 2011 citroen ds3 I need to update the software on. I dont know what wave it is. Could you please send me the link for the right update?
Hello, Can you help me with a link to update CITROEN DS 5, from 2016, firmware? Now i have 7.0.2 software version, and i tried to update to 7.3.1- r1 .
سلام عليكم، عند تركيب smeg+ جديد في سيارتي بيجو 2008 سنة الصنع 2015، لا تعمل أزرار القائمة و src، ومذلك رفع الصوت بعجلة القيادة، عند قيام بمسح بجهاز daigbox، لا أستطيع تغيير أي بيانات وكذلك رقم تسلسلي للسيارة الذي وجدته في smeg+ vf3 ??????????????.
Hi Moustafa, I have tried updating the firmware but it stopped with an error any way it can be reset ? as now every time i open the car the car is on blue screen with no functions working. Plese help
Hello Moustafa, how do I check which WAVE my 2022 Peugeot 5008 is? Please could you give me the firmware I need. Currently I have version: 42.03.31.32_NAC-r0
Hi, I couldn't install this software, I think my car never updated. I think I need version 1 and 2 then this software. Can you please help me with old version. Thanks
Hi Mustofa thanks for the clip but I have C4 grand 2015 registration . How do I update the software and how do I check the version of this model. I can't fine on mine but watched yours and it didn't work on mine. Probably different models . Any help please
@@moustafatch Hi , Mustafa , I have C4 picasso eclusive + 2016/ have been update software to latest SMEG 5.43 any chance upgrade to version 6.xxx ,looking for carplay and mirrorLink option .Thanks
hi Moustafa, i`ve just purchased a 2015 DS3 . The curent software on my vehicle is SMEG6.4A.R10 , CD:31210 , Dated 16-06-17. will your software work on my car? PS: How do i connect my car to WIFI?
Hello Moustafa , may I use your link "firmware" for Peugeout 3008 year2020 .if not, do you have a firmware link for mine. I have some numbers for HMI ver. and IMX ver. and V850 ver. if you need. many thanks.
Hi Mostafa. Appreciate if you could send me a link for the latest firmware for Peugeot 308 GT 2019 model Australian version. Current software is 21.06.16.32_NAC-r0 Most appreciated
Thanks for saying it needs Internet ( internet not mention in anything else I've found ) ill have another go at this 5th time lucky if not its going back to dealer Help aprecaiated
I have a rcc a2 that I removed from a Citroen capture car and I want to install it on my Peugeot 208 car, I tried to program it but it tells me "usb key is not compatible with this vehicle" can you help me how to operate?
Ehcellent video. Pls tell me is it possible with smeg+ update or on some other way to enable AUTO AC on my 308/2016 Peugeot. Originally I'm having ordinary AC ? thank you
Hi Mustafa do you have update for below software . HMI version: rcc2019.82.19.16.10.00 iMX version: x0401074_200326_19.1E028.5 V850 version: RCC19_19.1S18.9
