!!UPDATED!! Boat Ladder Install. Safety and Convenience! UPDATED!!

Просмотров 49 тыс.

% 338

So it was suggested that I ditch the screws and go through bolts, so I did. This is the updated video of that.
Follow along as I show you how to install a ladder on a boat.
Get this ladder here - amzn.to/2NIodeC
---If you would like to be more involved with the channel and help it grow please consider joining our Patreons! : www.patreon.com/ANJOutdoors
--Follow me on Twitter:
JohnAnderjeski
--Follow me on FaceBook:
AJ-Outdoors-2352338324993438/
--Follow me on Instagram:
anjoutdoors
--Get A&J Outdoors Merchandise:
teespring.com/stores/aj-outdoors-gear
--Donate with PayPal to help A&J Outdoors grow - www.paypal.me/ANJOutdoors
--My video equipment:
GoPro ActionHat - amzn.to/2HopS5q
Canon T6i DSLR - amzn.to/2WfLWb2
Joby GorilliaPod Tripod: amzn.to/2Qbyi2X
Large Tripod - amzn.to/2EdNDeM
Audio:
Movo Directional Microphone - amzn.to/2YzBh8h
Lavalier Lapel Clip-on Microphone - amzn.to/2Eewdyp
Sennheiser MKE 2 Elements Action Mic - amzn.to/2Eewh17
--Fishing Gear I use:
Penn Fierce II Reel 4000 - amzn.to/2Q8lk65
Penn Fierce II Reel 6000 - amzn.to/2LR0wl1
Penn Battle II Reel 4000 - amzn.to/2HplxiH
Penn Battle II Reel 6000 - amzn.to/2LMZYN6
Bubba Blade Fillet Knife - amzn.to/2JMG6Ha
Bubba Blade 12” Flex Curve Knife - amzn.to/2LOROUp
Bubba Blade Pliers - amzn.to/2LNtlyV
--Boat Upgrades and Equipment:
Hydraulic Steering Kit - amzn.to/30sjotS
Boarding Ladder - amzn.to/2NIodeC
Trolling Motor Disconnect - amzn.to/2NXZfs7
Motor Guide Xi5 Trolling Motor - amzn.to/2OkUbOH
Blue Seas Systems Mini Add-A-Battery - amzn.to/3aCnyUs
Negative Bus Bar - amzn.to/39syQNn
Zip Tie Gun - amzn.to/2PPZo0L
Cable Tie Mounts - amzn.to/2PWhJsT
Dual Battery Tray - amzn.to/2VScQF9
Heat Gun - amzn.to/3aBITNH
Clear Heat Shrink Tubing - amzn.to/2PUWgk1
Wire Cutters - amzn.to/2xkmmXp
Liquid Tape - amzn.to/2TLbx8h
60 AMP Fuse - amzn.to/34kSA15
1 AMP Fuse (100pk) - amzn.to/2ReuUGs
Installed Hatch - amzn.to/2AJmM8j
This post contains Amazon Affiliate links to products I use and enjoy. You pay no more or less for using these links but I do earn a commission on your purchase.

Опубликовано:

10 сен 2019

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 57

@StanleyOrchard 4 года назад

Fantastic video server and very thorough. This is some incredibly pertinent insight!

@feeberssissy2186 4 года назад

Great job on installing the ladder! Thanks for sharing! 👍

@paulgregoire3916 4 года назад

Great job!!! Was unsure on the ladder. Now I am convinced on the purchase. Thanks for the help! Great post!

@AJOutdoors1 4 года назад

Thank you Paul.

@ammogiant824 3 года назад

Before starting the screw use a countersink bit just through the gelcote

@AJOutdoors1 3 года назад

Or run the drill in reverse at first.

@dadams19111 4 года назад

Great video! At 60, I am thinking of putting one on my bass boat too.

@AJOutdoors1 4 года назад

Thank you. It is a very good idea.

@KZtheFisherOutdoors 4 года назад

Great video!!! Great info 💥👍👊

@fishingwithfredo2639 4 года назад

Great video Buddy!!!!!..... I have been thinking about getting a ladder, I am also considering tying a loop rope to get into the boat, especially during the winter when chasing big blue cats in case I fall in!!!....Great job on the video Ski also tell Joel I said Hi!!!!!!!👍👍👍👍👍🎣🎣🎣🎣😁😁😁😁😁

@AJOutdoors1 4 года назад

Thank you, I'll tell Joel hi for you.

@JimmyCandFriends 4 года назад

Nice work👍✌

@jsconnection9589 4 года назад

Thanks for comments.

@jchast1980 4 года назад

You didn't need the bolts. I installed the same ladder with 5200 and stainless screws and I'm 6'3, 330# and holds me just fine. Just FYI for anyone who can't access the underside of the deck you're installing this on, as was my case.

@AJOutdoors1 4 года назад

You may be right, but I do feel more comfortable having the bolts.

@johnfarrar865 4 года назад

User friendly thank you MO Wildhair

@AJOutdoors1 4 года назад

Thank you!

@JohnAmes 4 года назад

Big like my friend 👍👍👍

@jsconnection9589 4 года назад

Thanks for comments.

@AnthonyAngler 4 года назад

Thanks i went out and purchased the garelick ladder almost the same but it mounts to the transom. basically the same. it worked, but i did need to install the grab above it. Thank you buddy

@AJOutdoors1 4 года назад

Thank you, I'm glad you found one that works for you.

@RafalScrapper 4 года назад

that looks simple and easy tho me my self will add tiny string between first and last step to help out to fold it back before you fold whole ladder on to boat again and hanging string could help out again as you end up in water and forget to fold out from swimming mode i guess anyway great vid

@sicrx69 3 года назад

Great video, I have the same ladder on my triton cc. The only thing I would suggest is use stainless bolts and nuts with locking nuts and large washers. In addition to the 5200. I am not a big guy, but after tons of use, I found the ladder screws can start moving from the rocking or pulling when people use it alot. Once the ladder gets any movement, it will start pulling the screws. Save your self the headaches, and use nuts and bolts with large washers(washers help distribute some load).....IF you can get to the underside, mine is a pain but accessible. ...just my 2c. Great ladder though...side note, when you are in the water, you dont put as much strain on it, I try not to use it on land....because it puts way more stress on it.

@AJOutdoors1 3 года назад

Thank you for the input! I did have a couple nuts come loose, I used some lock tite to keep it from happening again.

@shwellcoin9573 2 года назад

We put tube glues in a zip lock bag and they for years.

@AJOutdoors1 2 года назад

Good tip, thank you!

@kevinmello2557 2 года назад

Great video! Thanks for recording it. I bought the same ladder as a replacement to an existing one that has round rungs that are painful to the foot when you step on them. Unfortunately, I have to re-drill holes as the mounting brackets to my existing ladder are not spaced the same as the new one. My problem is that my existing ladder has through bolts that are a VERY LONG reach from my access door to the underside of the platform. I thought the best way to access the nuts to remove the existing ladder is to tape a wrench to an extension handle (piece of wood or pipe). It's just very awkward, so I would appreciate any advice you may have that may make it easier. - Again, GREAT video!

@AJOutdoors1 2 года назад

Thank you! Without seeing it, its hard to tell, but if you have a deep well socket to fit the nut, and a long breaker bar to put it on you can get that on there and than just unscrew from the top. I hope you get it figured out!

@user-tt7ji2gv5e Год назад

Your 5200. Put Vaseline in the cap. Any thing like it works. Neosporin, greese, etc

@AJOutdoors1 Год назад

Yeah, someone else suggested that, too. It does work.

@Hhfgdrghvdsddfj 3 года назад

Nice, helpful video. Did you get video of it in use on the water? Some ladders are hard to use because the weight lifts the bow, and the ladder gets to an awkward angle for climbing.

@AJOutdoors1 3 года назад

Thank you for the kind words. I did not get video of us using it, but it worked well. I may add a garb rail one the deck there to make it easier to get in.

@mark98070 11 месяцев назад

I need a ladder with a large grab handle like the swimming pool type

@AJOutdoors1 11 месяцев назад

Good luck, I would have preferred something like that, but I could not find one that would work in my application.

@deanraddick9041 3 года назад

Hey thanks for the upload, when the ladders at full extension, what’s the full length? thanks

@AJOutdoors1 3 года назад

Thanks for watching! It is 45" long when fully extended.

@tankty6977 3 года назад

Great video with great detail. Me and my son are installing a 42” high grab rail on his fiberglass skiff. We cannot thru bolt it. Do you think this same system would work or should we put a fiberglass cutting board under the feet of the bar before screwing it down onto the deck. The deck is pretty solid. Thanks for any advice.

@AJOutdoors1 3 года назад

Thank you. That is a tough call to make without seeing it. I'd say go with your best judgement.

@AJOutdoors1 3 года назад

@Alden Pate In the description below the ladder video, there is a link to the ladder I used.

@clintonmclimore8370 2 года назад

grey video i been wondering which ladders would hold a bigger person

@AJOutdoors1 2 года назад

This one has worked great for us.

@clintonmclimore8370 2 года назад

Glad to hear it i just bought one off amazon can’t wait to use your video to install.

@AJOutdoors1 2 года назад

@@clintonmclimore8370 I'm glad the video can help you.

@cookiecanfly_ 5 месяцев назад

Hey mate, hows the ladder been going? Have you had any dramas with it? Thanks

@AJOutdoors1 5 месяцев назад

No drama at all. I sold this boat last year, the new owner is still happy with it.

@dsmith2858 3 года назад

Great video, after a year have you had any issues? Does it ever bounce over/self deploy?

@AJOutdoors1 3 года назад

Thank you! other than a bolt working a little loose, I have had absolutely 0 issues. It stays pinned tight to the deck/cover and doesn't budge.

@rudyweresch4984 3 года назад

You could add a rubber nav light pole mount at the front of the ladder to keep it secured!

@Jason-zp4ly 3 года назад

Am I the only one who heard the fiberglass ripping when he stepped onto the ladder? (17:54)

@AJOutdoors1 3 года назад

LOL that was the bottom of the ladder on the driveway.......

@Mihalyofficial 3 года назад

thanks for the tips but I would not want the ladder to be so close to the transom as the ladder hitting the rub strip might eventually cut it as the edge of the boat under the strip is sharp

@stephanieashton-smith716 6 месяцев назад

Another thing to consider….when the ladder is flush with the rubber strip it can pinch a finger. I recently lost half my finger on this type of ladder in that way.

@AJOutdoors1 6 месяцев назад

@stephanieashton-smith716 Ouch, I’m sorry to hear that, and that is a good point.