Updating Lenovo bios and Xeon upgrade! 

Glad it helped!

@@DLMtechgarage quick question though!... Thinking of the future :) Are any of the E5 xeons compatible, to your knowledge? Just wondering if there's any kind of compatibility list released with the bios update.

@@_RedsTech_ nah only the e3 the e5 is for 6th and 7th Gen boards only

@@DLMtechgarage ok, thanks for the info 👍

Thanks, build comes out Friday!!

Steven Williams how you put a 120mm led fan in front..i want to do the same in a M92p tower..(i believe its the same design like this..will i must do some trick in the front where the dvd rom case is..??

@@chrsrodrigez5565 never done it, reach out to steven williams, hes done it, can probably tell you better then i can.

@@DLMtechgarage i allready ask him here..i hope he will answer me..thanks again..

i've looked around and have not found anything definitive. one forum said yes, others no, another states theirs a bios issue. If I get one in I will try it.

no sure.

nahh

@@DLMtechgarage ok thx , but can i put a Xeon processor on my desktop?

either or, just depends on the amount of performance you are going for. Thanks for watching!

reading on the forums it should work and will work with a Xeon E3-1265 v2, just ensure you update the bios.

@@DLMtechgarage ok thanks..iam waiting this week a GRADE A Lenovo M92p MT Tower with an i5-3550 3,30GHz..4Gb of Ram and a 500Gb Hard drive and DVD Rom and i have from a previous built 12 gb of DDR3 1333..an SSD 120Gb..a VGA Radeon 1GB...and a couple of mech Hard drives and i want all of them to put them nicelly inside the Lenovo...let me ask you one more thing...in these Lenovos can i put an RGB Fun inside in the front panel...?..Only one i want to install for a better cooling and a light,,,i need with a blue rgb light...Does it fit in the Lenovo case and does the oem motherboard has pins for connect it..?...and wich dimension of fun must i buy to fit in front panel..???...120mm or 80mm Rgb Fun??..My PSU will be the oem..the store that i bought it said to me its 300watt PSU...i want to fit them all these hardware nicelly inside with an ok cable managment in this case for a little..and after a couple of months i want to swap all of them in a smal new case....but now i will stay a little with this case..so i want them to fit nicelly inside..

@@chrsrodrigez5565 I would imagine the 120mm would fit up front, never done it before. As far as power them up you probably need an external fan adaptor and some sata splitter depending on how many fans you do, I did not put one up front, I found that cutting the side panel and a sata rgb strip gave me the lighting i wanted.

@@DLMtechgarage i understood it completely...thanks again for these info .

@@chrsrodrigez5565 anytime!