UPGRADED BRONCO ALARM SYSTEM - FORD PERIMETER ALARM | The Bronco Adventures 

I just finished installing it on my 2024 Wildtrak and I have some tips (install 20-40 min): - You don't need to unscrew the module that's already there. That would have taken me HOURS! - You can simply pull out the bottom cable with your fingers and connect the harness. - Zipties were a bit tricky but you just need to fidget with them until you are able to get them in. I started from the back of the car to the front of the car. I worked my way under the module until I was able to pull it out from the other side with my other hand. - I had a small ziptie I used to tie down the loose cables. This video was extremely helpful, thank you!

Nice video. I’ve never seen anyone else cover this part. Something I will be looking into.

I was advised that I could not install and so I had my local Ford Dealer do it ... 2024 Bronco Sport. They had an outside concern come and install. I agreed on a price which was very high and especially then labor and the very, very, very short time installing the module. $505.00 with a $50 gift card from them as a new Ford Bronco owner. The module itself was only around $250.00 and tax on then total .... but he was 50 minutes late in getting to the dealership and worked all of about 15-20 minutes at the most installing. SO over $250.00 labor 😞and no physical verbal instructions and especially with the sensitivity settings where in the manual it say have a Ford Tech do that? $$$ for sure!! I have easy access to the sensitivity dial so just have to spend a little time adjusting. Knocked on the window and had not knock a lot harder then I wished to do. Also, my module is under then dash on the drivers side .... easy but a harder position than the glove box area. Thanks for the video .... kick myself for not doing myself 😞 9 July 2024

Thanks for the video. As someone had asked previously regarding doors off, I just wanted to clarify; will it go off if someone reaches in while doors are off? I had previously installed a Clifford proximity alarm and it was hooked up to the tail gate trigger. Unfortunately, when you remove the doors all the triggers are disconnected. In otherwards, someone can reach in pop the hood, grab items, etc and the alarm wouldn't go off. So I'm wondering if this solves that issue by being connected directly to factory alarm and is triggered when reaching in...

Thx for the video! To clarify / is the alarm you installed the perimeter PLUS (as per Ford site $250) ? Because my Bronco as others do as well I believe say it has a perimeter alarm on the window sticker BUT I have no idea how to activate it . Can someone explain what it is that comes standard vs this mod? I have a 2024 Bronco Heritage 4 door … Thx so much!

I have been looking at this .. was wondering how it worked , great video!

Great video guys, keep it up!

You guys are awesome!

Thanks so much for filming this! I just recently ordered and received this part for my Badlands after it was broken into. If you already have remote start, does this module re-map the key fob shortcut for activating it???

@theBronco Adventures ; would this work on a 1994 ford Bronco ?

Ok so I’m going to install my modules and the flashing led also. Hopefully depending on the weather this weekend. My question is after you activated your alarm system through the engine cycle, did your Ford Pass app show that you now have the alarm and do you get notifications on the ford pass app.

Hello, how did you find the place to connect the module, I bought this part for my 2024 Mustang and I can't find where to connect it. I appreciate your help.

Hi thanks for the video just what I was looking for I followed the eBay link to buy one it’s says dealer needs to program it , did yours work right out of the box or do I need to get it programmed first

I have the factory alarm and fob remote starter. Would i have the shock sensor also? I can't find the box??? 2016 ford edge

Looking at your keyfab, it appeard that u did have a remote start button on it. Was it not activated? I doubt your truck came from thr dealer with no no remote start. Im still trying to figure out out to work the basic alarm. I like the product. I sal like that its a ford product and wont boid any warranty. But my advice t you guys. IF YOU NEED THAT ITS TIME TO MOVE OUT OF CALI . ..... another great video . Thanks!!!!

Isn't it your car already has remote start feature? I notice the 2x button on the remote. Anyway, Cheer for this rare and great content 🎉

So my question is this..... If you remove the doors and alarm the system, does it respond to shock or jolts from someone climbing into the Bronco?

do you know If a 2023 ford mustang comes with this?

Would this installation work on a Ford Maverick?

Change out your cabin filter right where you were at with the alarm and buy some interior armor all wipes PaLease