UPGRADED CNC 4S Diff gears in the Senton 3S

Подписаться 73 тыс.

Просмотров 14 тыс.

50% 1

WOOHOO!!! I got the CNC Diff gear modules from Amain for better durability on the Senton 3s, here we have the install and drive. Take a Look!! Links are below, please use them to help support Exocaged RC, Thanks!!!
The CNC Diff MODULE gearsets I used
Amain bit.ly/3en24ST
Horizon bit.ly/3SVC0gQ
Amazon amzn.to/3yybRg2
Ebay ebay.us/NzEdAR
Lower Cost metal MODULE upgrade gearset
Amain bit.ly/3fPf1VU
Horizon bit.ly/3eq0rnC
Ebay ebay.us/eWjaCw
Arrma Senton 3s
Amain bit.ly/3TO3sOb (Red)
Amain bit.ly/3DkMrFQ (Blue)
Horizon bit.ly/3QBH7AD (Both Colors)
Amazon amzn.to/3RGDlr2 (Blue)
Amazon amzn.to/3RE4nQ5 (Red)
Ebay ebay.us/nBroyv (Red)
Ebay ebay.us/2ZdGej (Blue)
Spektrum FIRMA 130A 4s
Amain bit.ly/3C7Xuji
Horizon bit.ly/3ygcL0n
Amazon amzn.to/3SDYMcK
Ebay ebay.us/i5THhM
ARRMA BLX 100 ESC
Amain bit.ly/3EhAd13
Horizon bit.ly/3CvTmuO
Ebay ebay.us/AFbN2S
Spektrum FIRMA 100A ESC 2s-3s
Amain bit.ly/3M4HumQ
Horizon bit.ly/3V2xfn7
Ebay ebay.us/vSe64x
Flysky GT5
Amazon amzn.to/3BAC6UX
SCORCHED RC scorchedparts.co.uk/
Check out my new Affiliate website at www.ishop45.com I have a bunch there including Walmart, Amazon, Ebay, Amain, Horizon and more, just click the store you want, and shop as usual, thank you guys!
If you would like support Exocaged RC Directly, consider being a channel member. Cheap monthly membership fees, they are $1.99, $4.99, $9.99 and for the big guys $24.99. Take a look! / @exocagedrc
Amain Hobbies bit.ly/3cHmsHX
Horizon Hobby bit.ly/3tMTCB5
Gens Ace Batteries genstattu.ositracker.com/3226...
ArmedAmericanSupply (Clothing)
Buck Knives bit.ly/3yCoXZK
EMP Shield bit.ly/3Q7dMPE
HenyStar (Womens Clothing) bit.ly/3y7jDw2
BeardBrand (BeardStuff) bit.ly/3xD6af8
Maui and Sons (Surf Apparel) bit.ly/3aD4Z7Q
HeadBanger Lures (Fishing) bit.ly/3MIFpvZ
Harrelson (CBD) bit.ly/3NxQBLY
Luxury Yacht Vacations me160.isrefer.com/go/differen...
Get Upside, I use this every time I fill up and just let it earn until Christmas time and cash out. It works and once you get used to it, it’s an easy habit.
Click this link or use promo code 9H6W8 to get an extra $2.22 bonus the first time you make a purchase. upside.app.link/9H6W8
#arrma #senton #3s

Развлечения

Опубликовано:

11 окт 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 56

@drog343 Год назад

If you have a longer tool tip, your meant to go down the center of that half shaft to access those screws.

@rycarrcnmore2440 Год назад

To fix the problem with the dirt in the spur I just cut out a hole in the chassis under the spur gear and never had that problem again

@isaackshirley4695 Год назад

Yup u don't have to take the shaft apart it won't work like it does after u take it apart like that I did that before lol

@isaackshirley4695 Год назад

2mn down in the middle of the shaft lol

@i110gical3 2 месяца назад

I bought these tires for it Pro-Line Racing Badlands MX28 2.8 MTD Raid Black 6x30 F/R PRO1012510 RC Tire The chassis needed to be modified but you have way more control no speed wobble... It does pop wheelies so there's still some work needing to be done to drop the front and raise the back... But it's a night and day difference with control.

@yonicozac Год назад

The stock diffs are a bit stiff but get looser quick. the Senton dont really need stronger diffs as the wheels are small and light. Sealing the power module opening is a must! i use some blue painters tape and it stays clean. you'll destory the spur & motor quick if you dont do that

@Corhndog Год назад

Any Rc that runs more than 2s will fully benefit from all steel drivetrain. Unless you like doing diff work after every other pack

@yonicozac Год назад

@@Corhndog I have this car for 3 years now, run only 3s, still stock plastic driveshafts, replaced rear diff (crown gear) twice. It’s fine

@Corhndog Год назад

I’ve been in the game long enough to no you’re lying or you drive like a grandma. Pry both honestly.

@BeardedStigg Год назад

Nah bro my senton has been 3s put at least 30 or 40 packs through it and no issues, other than the center axel and servo. I have no complaints

@yonicozac Год назад

@@Corhndog maybe that’s the issue, you’ve been too long in the business.. try modern cars and not traxxas

@FLPatrick1095 Год назад

Those are actually better than the 4s diffs. The stock 4s diffs are of weaker powdered metal. Youre not supposed to pop the driveshaft joints, you just need a really long hex driver to get into it!

@sakfpv8444 Год назад

I did that to my big rock 3s a while ago, keep some shims on hand! I run through maybe 5-10 batteries per week, and I've only had to add 1 shim to the rear diff over the last few months. I don't go super hard bashing, skatepark once a week, but a ton of beach running. And look at the mod to cut a slot below the spur gear in the chassis, let's everything fall right out. I've been on the same metal HR spur gear since I got the truck last year.

@arq.andresfelipemoralesvar9593 8 месяцев назад

Hi! I just ordered this product for my granite, I’m new to hobby so I don’t know when to shim the diffs. How can you tell? Thank you very much!

@KurtsRCs Год назад

Haha sometimes it is good to watch RU-vid you could have looked up the easy way to get the drive shafts off the hubs haha, the cheap hex drives are long and can fit through the whole drive shaft to get to that screw. If you want them to be extra strong get the HR yoks keeps the input and ring gear from separating

@needlejuse1113 Год назад

Great Video

@dirtybauer7022 Год назад

When removing the axles from the diff, youre supposed to have a long 2mm driver and go into the axle shaft to unscrew the screw. No need to take apart the u joint.

@willanderson5088 Год назад

Better way in stead of tapping up the motor mount. Drill a hole in your chassis to let sand and gunk out. Works way better then trying to tape off that motor gap

@lyleburns2640 Год назад

The wall is going to look good when you get it all done

@kenmastersmaster 4 месяца назад

Yes there's a tool for popping out and putting in drive shafts. They come with the Traxxas kits.

@Moggmodels23 Год назад

Hi bud yes you upgrading it at Last I've upgraded mine 2 months ago running on 4s lipo battery very much punch and faster 😀😄

@nathansales9451 10 месяцев назад

Nice

@old-rcplane-phart Год назад

😁👍

@theconservativeconvict6353 Год назад

You go straight thru the shaft ,not through the joint bud👍🏻😜

@arq.andresfelipemoralesvar9593 8 месяцев назад

Hi! I found this very helpful because I’m about to install the same product into my granite. I’m just hesitant about to shim the diffs, how can I know if it’s necessary and how many shims should I add? Thank you again for posting this video, I’m subscribing now!

@S9RUT Год назад

I've never had issues with the stock plastic diffs, even running 4s and bashing it super hard!

@ExocagedRC Год назад

I didn’t either but I want it to be as reliable as possible plus I needed to open it up and fix the drag issue

@dylanbrookbank9669 Год назад

Wait so you can just buy a 4s and use it? I thought it was only compatible with 2-3s

@S9RUT Год назад

@@dylanbrookbank9669 swapped out the ESC.

@blueprelude94-33 Год назад

Need to drill a hole in the chassis under the transmission

@fredrickfletcher2823 Год назад

I'm getting the Senton 4x4 V3 3S for my Birthday, what are some upgrades that I should get for this Truck?

@JIPPERR_1 Год назад

My senton was a bit tight up front, seems to be getting smoother after a few packs though. I ve got a major issue trying to remove the half shafts, the screws are lock tited overly well and i can't remove them.

@gonzodetroitify Год назад

Put a hot soldering iron tip on it for a moment or two to heat the thread lock up and that should help release the grub screw on the half shalt be careful not to hit the plastic tho

@JIPPERR_1 Год назад

@@gonzodetroitify I'll keep this in mind if/when the time comes. Actually it was interesting to see exo was able to remove the universals as i may need to do that to get the iron in there without melting the plastic. Cheers!

@charlesray6367 Год назад

cut a hole in the chassis under the spur and you wont have a problem with the transmission packing up dirt

@willanderson5088 Год назад

To do those screws you go threw the shaft. Don’t have to take them apart

@beernbashrc79 6 месяцев назад

It sounds terrible though, is that really normal for these trucks I’m new to the hobby but that grind Jeeze.

@ExocagedRC 6 месяцев назад

in stock form they are usually quieter

@Loose_Lucy Год назад

Those are currently discontinued any suggestions on an alternative?

@ExocagedRC Год назад

the diffs or the whole truck?

@Loose_Lucy Год назад

@@ExocagedRC diffs

@old-rcplane-phart Год назад

Heli direct has a $42 plier that works. Will NOT let me post a link. FINALLY! ONE does pay for quality

@old-rcplane-phart Год назад

www.helidirect.com/products/lynx-cnc-ball-link-pliers-5-to-5-5mm

@kylenagy9410 Год назад

Really long hex driver

@Moggmodels23 Год назад

Go for metal spur gear OK better 👌👍

@Lucas.stalcup Год назад

I see you love my products

@kenmastersmaster 4 месяца назад

You need a metal spur gear or it will strip against the metal

@ExocagedRC 4 месяца назад

yeah I did put a 4s metal one in

@kenmastersmaster 4 месяца назад

I was thinking about getting it. I find them on ehh Bay for 40 each

@kenmastersmaster 4 месяца назад

Why did you get metal diffs if you didn't strip the originals? Since you're not beating on it makes no sense

@ExocagedRC 4 месяца назад

Why not? I almost always upgrade things before they break

@kenmastersmaster 4 месяца назад

Seems like a good way to burn thru a bunch of money for nothing. The odds of stripping the original diff is pretty hard unless you abuse the poor things. All this does it send the shock up the drive train to the spur and drive axle which now both have to be replaced with metal

@Datsuncrazy206 16 дней назад

@@kenmastersmasterI have run 6s through my granite on stock diffs for 18 months. Just put it back to 3s for my son. Now I run 6s on my kraton 4s V1. Still on stock diffs. No problems. Don’t land full throttle. And don’t goose it non stop. It’s alright.