Upgraded JJRC Q60, fully proportional, diff oil, motor and electronics. WPL parts 

Hi, does anybody know if JJRC Q60 kit has soft tires same as WPL kit? Or how soft tires are on JJRCs?

hey brother, i have just finished your upgrade project on my q60 . it performs excellent and for that i am so grateful to you for sharing your knowledge with us all. Thank you very much.

I cut my motor mount with a butter knife heated with a blow torch, super fast and smooth

Kind of what I was looking for. So I can make a scale build of my favorite monster truck.

My go to for wpl tech! Thanks mate from Canada!!

I'd solder a filtering cap of 0.1 uF across those motor terminals, these motors generate a lot of noise. I've ordered a diff and a gearbox to convert a 1:16 Bruder truck for my boys, used lithium grease, works the trick. I like the way you do your videos, well done, keep them coming!!!

thats so cool. looks real. hope to see grave digger next monster truck

Just ordered one... Q60..jjrc yesterday the tan one tho.. great vid.on upgrade.. It will be handy in the neer future..thank.s ron

Just got one of these and want to do the upgrade, very informative, great Job Tomley.

I imagine they put in the non-proportional steering to save on radio costs. I expect it's a lot simpler and cheaper if you don't have to send any analogue signals.

Hi and thank you for sharing, Got one of these today but..... box was mangled, front axle smashed, bonnet hinges broken off... opted for a currier delivery but dint get much in return... i looked around this thing and I suppose i've to upgrade since I've to get spares anyway. the 20A esc is a bit of a overkill for this but grease in the diffs is a great idea. I've got transmission and diffs for the WLtoys 4x4, for a Bruder conversion I did for my boys old trucks and seems its a straight forward replacement. Nice videos, keep them coming

Super glue the diffs remove the little gears it will make it one straight axle works great super heavy duty for plastic

I use 500.000(500kl diff. oil (silicone) in my HG-P407 bruiser.

I used bearing packing silicon grease works way better now, definitely needs motor and driveshaft upgraded

In real off road trucks. They weld the spider gears in the diff to create a locker. Do the axles on this have spider gears? If so glue them together. That will create a locker.

I recommend oiling all of the parts that move/rotate

Just ordered one lol had to after seeing the fun ur having 😂and will be using ur video for the build. Thank you. New sub

steering link: press a round neoprene/rubber servo grommet into the upper end of the link (it'll flange to both sides pretty proper). then put a brass/bronze metal grommet into the rubber, its single flange at back to go against servo arm. use a typical longer servo mounting screw through all for attaching (trim the end or don't, if it doesn't bang into the tray badly), instant nice no slop connection at the servo. lol.. all spelled out, as seen on Gabriel Silvaz channel and done myself, it's like perfect. edit: open diffs like those (but larger) we used to pack full with Vaseline is even thicker stuff for its limited slip action, easy cheap available, may do more and stay put too. another "oh hey", pair of 18650 cells in series runs these things pretty nice and long with 7.4v and typical/real 2-3000mah capacity. run my C24 (dual N30 gear motors) with pair of 14500 (AA size) lithium ions about 1000mah, for convenience. they behave like most batteries, strong until about 80% depleted, runs "forever".

Looks like jjrc has a bit more quality then wpl. Nice upgrades. Going to try out one of these.

I just choppedthe whole back end off. Only four wheels and so much better

Nice upgrade 👍 thanks

Use resistor for headlights

Great build video my friend, looks so so Good , great video brother 👍😁👍

👍A tip for you on those open diffs you can use tamiya anti wear grease in them it works like a charm. de grease them first before using the anti wear greases in them.

Awesome video! Thank you for tips and tricks. Thumbs up!

ÓTIMO CAMINHÃO TRUCK, BRASIL OK.

good

Perhaps a small amount of weight in the truck's bed would help with keeping all the wheels in ground contact, and provide better traction. I'd begin with maybe 1/2 pound of weight, and gradually increase the weight experimentally to see results. But too much weight might cause damage to suspension and running gear.

Hello, thank u very much for this upgrade video, i have both colors of the q60, and i will also upgrade both. With ur help, i will safe a lot of time :)

Great vid..but i always use vasaline. In the diffs on my cheap trucks and use the silicone for my stadium trucks and 8th scale gassers...thanx for the vid ive been thinking of getting one of these just chasing the dog...

Nice dude that thing is great

Nice done, I know it is while ago.. but.. is this esc any good?? Cause I m going to install them.. cheers💪

What upgrade part numbers if u please sir? Since I got mine from Amazon, (& was depressed!) I found YOU! I been n2 rc all my life basically. Since I was 14. 56 now. I refuse to be beaten! LOL! Keep up the awesome work!

Just for info.. Use jx1171mg motor gear keep on slipping. then i use jx1181mg. A oerfect fit...problem solved.

I'll need your talent to do this up grade 👍

Hey, Very complete video, interesting! But why didn’t you get ride of the diffs? Forgive me if you mentioned it... but the video was long...😃 Cool though

What servo , electronic parts do you use for the jjrc q60 ?? And what battery do u use?

Any idea why my jjrc q64 is stoping no power to spin wheels and is giving noise from motor like is cutting power off

Hi. I recently bought such truck. It looks cool. In the future I want to convert it into a functional offroad dump truck, because those Huina dump trucks are kinda lame IMO. Anyways... How about the full metal 2 speed gearbox with 370 motor? I'm interested mostly in slow, but full of torque crawling, using winch etc. Nice hack with the silicone oil. I definately try that out =)

How did you stop the oil leaking out , from the diffs? As there not designed for oil.

Show Parabéns,,,,,,,,,,,,,,,,,

I really enjoy your vids! I'm wondering if it may work to glue those internal diff gears.-If, as you said, a person would rather not spend $ on axle upgrades. I think I'll try that on mine when it FINALLY gets here :-) Just a thought. Thanks for all the good info. Keep up the good work!

Can ya tell us slowly what we need & where to get the up grades. The proportion steering & speed is what id like to do on this very same truck.

super cool videos. ( :"

Hello, I have a jjrc q60 and want to do a battery upgrade. I found a jjrc 3000 mah lipo battery but the plug is different. I have shared the link of the battery below. Can I solder and change the plug on this battery?

Can you use a servo with the original control board ??

cool fella top job

Your awesome thankyou for making awesome videos your the best

You need to use grease. The oil will leak out of the axles

Hi mate is it worth doing these upgrades for my huin1573 crossed with this chassis I'll be using the huina controller and motherboad and how much for the upgrade bits motor esc oil ect

Parts listed are not used in the video? I mean Deceleration gear box - do I need it? Or how to mount it to this truck.

Great video ! I did the upgrade with the same electronics but mine the motor runs all the time, does not stop, any ideas ? Thanks!

If it does leak on gear side you could make it gasket out of cardboard. Hard cardboard like you get off a notebook. And that would probably work on that side or even ATV gasket Medicare gasket seal. Anybody you know who's got a dirt bike or anything or motorcycle will have it in their garage need about size of a pea to do that. And if it leaks out the other side you just have to try to find o-ring small enough. You can probably pull one out of an old piece of shit shock off of 10 scale truck probably work fine. Can't decide should I get the Toyota or the military truck with the single axle.

It is a bushing not a bush

Does the JJRC axles fit on the WPL cars? I want my WPL to have fully functional differential

Is it possible to mod only with esc+servo AND using the std controlleer and radio which came with the kit?

cool Works

Do I need a new esc to make the servo work? Nice video

I think I'm going to just hot glue my difs. Did 1 axil with 100k different oil like you did. Needs a full lock. My 2 cents worth. I do love the looks of that cab. Mite turn it into a 4x4.

Can you tell me what pitch and tooth pinion gear goes on the motor. Thanks

Have the q61 my driveshafts have no pins,lots of in and out movement from the pinion into the pumpkin would like to shim it how do I get the pinion off of the half driveshaft?

Idk.. I'll subscribe.. only. Only if boob tube told you to put the commercials in.. wya!!🖖

Where can u get just the drive motor like u replace into the trucks original gearbox

Is there another motor mount cause I can't cut it?

What’s the cost and we’re do you get the parts for upgrades?

Loose the silver transfers and give it a good weathered look. I did my 4x4 version of this truck, now it looks like it belongs in the 1940s.

Hi do you know if q60’s tire will be compatible with q65.. great video by the way.

Would I be able to take those axles out and replace them with the wpl ones so I could upgrade them to the metal gears and metal drive shafts?

how are the diffs goldinnng up so far ? looking forward bying a couple for a project

Bought one my self like to know can u up grade to metal drive shafts

nice, but.... bad idea from JJRC open diff... try to lock it maybe ?

I literally know next to nothing about RC. Why would the diff oil help with the wheel slippage?

Great video. Thanks for the effort. I've been thinking about getting one of these to do just this. The body alone seems almost worth it. Is it really necessary to upgrade the motor as well? I think I would try just locking one or both of the rear axles only, and leave the front with grease. Your could retain better turning circle and have great grip. I can't say since I've never had one of these, but might be worth a try.

Nice vid!!! I'm looking for some advice on my q60... I already have the metal axles mounted, and a 370 motor. 20A ESC on the way.... Can i use that ESC with the standard 6v battery and electronics? If not, what must i order to get it working? Thanks for any advice!

Put some weight in the back of it to give it more traction. Maybe some brick or metal pieces, sumat substantial. 🤔 😀

Mr.t is there not a way to lock the diffs in them

Hey man thus the wpl steering servo works on the MN-D90 truck RTR version ?

20:02 это все из-за деференциалов, для гряземеса нужно полноприводные мосты ставить

If I was going to put a370 motor in to a b24 would I need to get a bec and what amp?

Hi, I'm from Brazil and I watch your channel a lot, it's great. I am starting in RC and bought the JJRC Q60 and would like to make an upgrade equal to what you did. my questions are: to use the steering servo, is it mandatory to use ESC? and can I change the motor and install the servo without using a new transmitter ?? thank you

I just got my wpl b16 6x6, the motor is shit and cant climb even small ramps. Can I keep everything stock and just put a 180 motor? Will tee motor work with stock esc?

Dog or bear prints lol

Is it good idea to change a motor in this model for brushles with 2speed gearbox

What tires? looks nice

im thinking on getting this one but my question is do the servo of wpl and wpl 2 speed gear kit will fit on this this truck?

I would like to do the upgrade for my JJRC Q60 but as I'm a beginner I'm not sure if I have everything. Can you please check my list: 1. 20A Esc Speed Control with Brake 2. Austar AX5S 2,4 Ghz Transmitter 3. JX-PDI-1171MG Micro Servo 4. 180 micro Dc motor from Aliexpress; here I saw in the picture that it doesn't have the gear on the motor axle (do I have to buy it separately?) On your items list I saw a WPL Deceleration Gear box. Do I need it as well? Thanks a lot

I use petroleum jelly to get limited slip effect on open diffs, pack it in tight!

Is there any metal gear differential?

Mr t wat was the motor replacement for and wat size is it

4:35 полярность тут не важна, на пульту обычно есть реверс перед-зад, право-лево

Axle full metal??

Will the 370 motor fit ??

Is this assembly suitable for jjrc q61 4x4?

I think they do it with crap parts coz they know they will make more money out of you upgrading

Nice

And I still don't know how to remove the Cab?

Does wpl driveshaft will fit on this and does the metal gear upgrade will fit on this too?

What weight o in l do you use??

You cud of just turned the motor over couldnt you rather than re doing the wires

What lubricant did you use in the differential?