Where do I find the m22-15mm female quick disconnect connected to the machine for the hose going from the machine to the wand? I can’t find a female qd to m22-15mm anywhere. All I can find is a 14mm with a female qd. All the m22-15mm I have found have male 3/8” plug.
Very helpful video, Frank. When I use the 50' hose, the water splashes suddenly for a second from the hose bib as soon as I trigger the wand off while washing. I guess that's the backflow prevention by the vacuum breaker on the hose bib. Surprisingly, that is not an issue when using the original 20' hose. Any idea how to prevent the splash?
I have the exact same pressure washer but I bought a 50 ft hose from Home Depot and I feel that it’s not strong enough pressure like the original 25ft hose it came with. 50ft hose pressure is 3,300 and the 25 ft is 2,200.
Thanks for your informative video. However I am still a bit confused; for the SPX3000, what are the accessories you recommend to make both the OEM gun connection fitting and the opposite connection fitting at the pressure washer, using the OEM pressure hose, able to snap-in and “swivel”. (I do not want to add snap-in capability for the water supply line.) Thanks.
Which foam canon do you recommend for this particular sun joe pressure washer ??? Also, the link you posted for the quick connect adapter mentioned in your video is not working for some reason. Can you post another please??? TIA.
Which fitting do I need to buy to fit on the fitting you have on the machine? My after market hose is m22 but has that big female end that usually screws onto the machine
alex alex www.amazon.com/Twinkle-Star-Connect-Fitting-Pressure/dp/B073RDZ7KC/ref=mp_s_a_1_3?keywords=twinkle+star+3%2F8&qid=1573071984&sr=8-3 here you go! If that doesn’t work it’s on amazon. It’s the twinkle star m-22-15 swivel+3/8 QD
Good video but the obsessed garage gun is hella expensive, 100$ when the pressure washer itself is 150$.. At that point id rather just spend more on a better pressure washer idk
I just ordered the sun joe 3000 my I have dusichin foam gun it has m22 male x 14mm inside will the 3000 hook up to that or do I need to modify it and do you have the fitting I don't want to go with a new hose just be able to switch heads when I need to thank
jason hinckson this is quoted from their website. It might be what you’re looking for. “Your pressure washer must be connected to a main water supply with a main pressure system providing a constant inlet pressure up to but not exceeding 0.7MPa (7 bars, also equal to 100 psi).” It doesn’t say what the minimum water pressure has to be so I would image even with two hoses you’re fine.
Manuel Cruzado if I’m pulling it out of storage and it’s all wound up it does but once I pull it straight it’s great at staying unkinked. Since I have the swivel gun from obsessed garage it rolls itself as I walk
DON Q Actually when I ordered the hose and hose guides I ordered a new inlet. It’s only $5 on Amazon. I think the gasket goes bad in the one it comes with quickly. So for $5 it’s a good fix
@@frankthedetailer441 thanks. Would you mind sending me the link need to get the same one please. You use this to replace the stock brass connector garden hose inlet.
DON Q www.amazon.com/Sun-Joe-SPX-AGHA-Universal-Aluminum/dp/B01E47ZCHK/ref=mp_s_a_1_1?keywords=sunjoe+parts&qid=1561129537&s=gateway&sr=8-1 is this what you mean?