US Naval Aviation Cutting Board || CNC Inlay || Making Process || Wood Inlay

Подписаться 3,6 тыс.

Просмотров 15 тыс.

50% 1

Unite States Naval Aviation cutting board / charcuterie board - The board size is 19 x 12 x 2 inches.
Wood: Walnut with Maple
Bits:
30 Degree Vbit
CNC Router Bits 3.175 Endmill Flat Nose Two Flute Spiral Upcut: amzn.to/37dTb7S
Finish: Walrus Oil
CNC: i2rcnc.com
Finishes:
Finished with Odie's Oil: amzn.to/3szoAJG
ting Board Oil and Wood Butcher Block Oil, 32 oz Jug: walrusoil.sjv....
CNC Bits:
CNC Router Bit 6mm Shank 2 Flutes Straight Carbide 0.3mm Tip 15 Degree: amzn.to/3FUjYnJ
CNC Router Bits 3.175 Endmill Flat Nose Two Flute Spiral Upcut: amzn.to/37dTb7S
Whiteside Router Bits RU2100 Standard Spiral Bit with Up Cut Solid Carbide 1/4-Inch Cutting Diameter and 1-Inch Cutting Length: amzn.to/3qQFa9z
Supplies:
Spectape ST501 Double Sided Adhesive Tape, 36 yds Length x 1" Width Paper: amzn.to/3iLE2zL
3M Xtract Cubitron II Net Hook and Loop Sanding Disks: amzn.to/3qKV31e
For my board conditioner:
UltraPro Food Grade Mineral Oil, 1 Gallon (128oz): amzn.to/3713BKd
Beesworks Beeswax Pellets: amzn.to/3wQEYLa
Moretoes 36 Pack 2 Oz Metal Round Balm Tins Black Aluminum Cans Empty Containers: amzn.to/3Dph4HX
ARB Woodwork t-shirt: amzn.to/3DpiguV
From InShot
Music: Golden
Musician: Jeff Kale
From InShot
Music: King
Musician: Jeff Kale
For custom orders go to: www.arbwoodwor...
Hello,
My name is Andy. Welcome to the channel, where you can see some of my custom projects being created. Hope you enjoy the videos. I appreciate the likes and subscriptions!
Thank you,
Andy

Опубликовано:

14 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 43

@GetOffTheCouchDesign 2 года назад

That’s a sweet press you have there for the inlay glue up!

@ARBWoodwork 2 года назад

Modeled it after a book press. Going to need version 2, the top is starting to bow under the stress.

@connycrow4178 2 года назад

This is great! The person for whom it was made will love it!

@ARBWoodwork 2 года назад

Thanks!

@youronlinepresencepro9348 2 года назад

Great videos! Thank you so much for taking the time to make them... I too look forward to your Vectric videos

@ARBWoodwork 2 года назад

Just posted a video that has some vectric screen shots

@JohnColgan. 2 года назад

beautifully made,was that an Odie's Oil or equivalent that popped the grain. really nice finish on it.

@ARBWoodwork 2 года назад

That was Walrus oil.

@HolosSolar Год назад

Really nice work! How are you getting such detailed vector art. Do you use some graphic program like Illustrator or Photoshop? Or a camera then importing using the import bitmap feature in VCarve? I would like to do more on my guitar fretboards…Anyway thanks for the great videos.

@ARBWoodwork Год назад

Make the designs on Illustrator mostly.

@ralfhensel6946 2 года назад

Great work! Love it! Could you do a vetric video with your steps? Greetings from Germany!

@ARBWoodwork 2 года назад

Thank you for watching. I am working on a video that I will release later this year on how I use vectric for these inlays.

@ralfhensel6946 2 года назад

@@ARBWoodwork Great to hear! Looking forward to it!

@marks8421 2 года назад

Nice job .why didn't you program your cnc to cut out your inlay instead of using your band saw .I see everyone do that and it seem faster to cut it on your cnc while it's there ,anyways great work

@ARBWoodwork 2 года назад

Thanks for watching! I have thought about that. Right now I don't have a consistent thickness for my plugs so I would have to change that depending on the blank I use. Also I am finding that breaking the plug into smaller pieces helps in the glue up. With the thin kerf of the bandsaw I am able to get to tighter areas for separating the pieces.

@joesmale13 2 года назад

Great video, very nicely done. Do you ever try and fill the tiny gaps? I’ve just done one and there are some tiny little holes and I’m tempted to fill with saw dust and glue 🤔

@ARBWoodwork 2 года назад

Depending on the size or amount. When doing something for myself I will try that but when for others I will try and recut the inly plug to fit better.

@enyoc3d 2 года назад

binging your vids - they are awesome! which version of vectric do you use? cut 2d? v-carve? v-carve pro? other? thanks

@ARBWoodwork 2 года назад

Thank you. I started with vectric v-carve desktop when I had a smaller machine but upgraded to pro when I got the i2r because of the larger bed.

@Eric-rl8bl 2 года назад

Great work! What depths did you use for the pocket and inlay settings in vcarve?

@ARBWoodwork 2 года назад

.2 inches for the flat depth of the pocket Start depth 0.18 and flat depth 0.08 for the plugs.

@naz8885 Год назад

This is awesome. How deep do you go for your inlay? Im new to this and I always feel nervous going beyond 0.12 inches below the surface

@ARBWoodwork Год назад

Anywhere from .25 to .3 depending on the bit. On my old machine I had to do multiple passes. I have an older video that shows this process.

@borisgutman3457 Год назад

@@ARBWoodwork Hi very nice. Did you use multiple files for this piece, because for the eagle male part the height is much smaller than the letters. Thank you

@vibewooddesign6570 2 года назад

Nice work. Could you tell us more about the press you made? Thanks.

@ARBWoodwork 2 года назад

The press is a prototype that I modeled after a book press I saw an image of. It is all made from plywood. The screw that I used was a shoulder vice screw that I found on Lee Valley Tool's site. www.leevalley.com/en-ca/shop/tools/workshop/workbenches/vises/31134-shoulder-vise-screw?item=70G0151

@AcrylicMemories 7 месяцев назад

what size is your CNC? Maaaaannnnn, That wood really soaked up that oil

@ARBWoodwork 7 месяцев назад

24”x48”

@AcrylicMemories 7 месяцев назад

@@ARBWoodwork How often do you use the actual full 4 foot Im tossed between the 2x2 or 2x4 Not sure i would use more than 2 foot

@fredwienbarg5051 2 года назад

Beautiful!

@ARBWoodwork 2 года назад

Thank you!

@markmoulin41 Год назад

Should have used NFO wings!

@ARBWoodwork Год назад

Good idea

@11peyman 2 года назад

Great work 👍🙌 How do you get your cnc to start carving away the excess wood after inlay glue up? I just started using Vectric Vcarve so i wad wondering if you could help me out Thank you

@ARBWoodwork 2 года назад

I create a pocket toolpath that is just under the depth of the excess sticking out of the plug. The shape of the pocket is created with the offset tool with an outwards distance of a 1/4 inch around the perimeter of the inlay. Sometimes I just draw a new path around complicated shapes with some clearance for the inlay ad use that instead of the offset.

@11peyman 2 года назад

@@ARBWoodwork thank you so much for your help 🙏🏻

@WoodyWoodyATL 2 года назад

@@ARBWoodwork I found put the touch plate on top of two pieces of paper with 0 cut depth works, and don’t need to worry about the pocket piece height.( just make sure the pocket piece waste is not too thick since it has to be one pass)