Using Maschine MK3 Transport Buttons + Pads in Logic Pro X

Подписаться 149 тыс.

Просмотров 52 тыс.

50% 1

Free Controller Editor Template: sguy.co/maschine | Play, record, stop and loop inside of Logic Pro X with the Maschine MK3. In the video below I’m going to show you how to set your Maschine MK3 up to control Logic Pro X’s transport control. You’ll also be able to use the 16 pads to record MIDI straight into Logic Pro X’s arrange window.
Now I’ll be the first to say this, the Maschine MK3 is a beast but only whilst in its natural habitat. If you want to get the most out of your Maschine MK3, learn the Maschine stand-alone software. It’s incredible. However as a long-time Logic Pro X user, I know there are times when you just want to work inside of Logic. So it would be nice if it worked well inside of Logic Pro X too right? The way the Komplete Kontrol MK2 does. This workflow will get you ever so close.
Software Versions:
Controller Editor - 2.2.2
Maschine 2 - 2.7.2
Logic Pro X - 10.3.3
MY PRODUCTS
SG Chord Pack Vol. 1 [MIDI Chord Pack] // sguy.co/chords
Producing For Vol. 1 [Sample Pack] // sguy.co/produc...
1995 [90s R&B Sample Pack] // sguy.co/1995
SAMPLES
Where I get my samples // sguy.co/samples
MY GEAR - UDATED FOR 2022
KEYBOARDS & CONTROLLERS
Komplete Kontrol S49/S61 [Standard] // sguy.co/komple...
Komplete Kontrol S61 [All White] // sguy.co/s61-25
Komplete Kontrol M32 [32 Keys] // sguy.co/komple...
Maschine MK3 // sguy.co/maschi...
Maschine MK3 Mikro // sguy.co/maschi...
KEYBOARD & CONTROLLER STAND
K&M 18810 [Table-Style Stand] // sguy.co/18810
K&M 18811 [2nd Tier] // sguy.co/18811
K&M 18822 [3rd Tier] // sguy.co/18822
K&M 18819 [Controller - Laptop Tray] // sguy.co/18819
K&M 18803 [Table Top] // sguy.co/18803
K&M 18817 [Universal Holder - requires 18814] // sguy.co/18817
K&M 18814 [Adapter] // sguy.co/18814
MICROPHONES & AUDIO INTERFACE
Shure SM7B [Dynamic Microphone] // sguy.co/sm7b
Rode NT1-A [Condenser Microphone] // sguy.co/rode-nt1a
Solid State SSL2+ [Audio Interface] // sguy.co/ssl2
HEADPHONES
Neumann NDH 20s // sguy.co/ndh-20
AIAIAI TMA-2+ [Wireless] // sguy.co/tma-2
Disclaimer: Some links present in this description area are affiliate links. This means I get a small commission on any sale generated through the clicking of said links. This is at no extra cost to you and helps fund the channel & the creation of more free and helpful videos such as this. Thank you for your continued support.
CONNECT
Website // stefanguy.com
Instagram // sguy.co/instagram

Опубликовано:

7 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 298

@stefanguy 6 лет назад

Transport now works natively inside of Logic - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-zqopzEjCPX0.html however as of posting this you won't be able to record with the pads. Continue watching the above video if you require both functionalities.

@alexoldroyd770 6 лет назад

Hi Stefan - are you still able to use the wheel and nav buttons etc to browse through sounds?

@KaneLono 5 лет назад

Yeah but not the MK3 Mikro.

@nkosiedwards3796 5 лет назад

Maybe i missed it, but why did you set everything to channel 2 again?

@fiveshorts 6 лет назад

My friend. You are a lifesaver. I just bought the Maschine Mk3 and was having the usual fun/honeymoon period with it as a beatmaker. But that, of course doesn't last long (as I'm not a club monster). What I wanted, was the exquisite sensitivity of the pads as a playing surface within my precious Logic. Whatever I did, it felt like I either had a standalone (kinda) drum machine, or some bizarre build-a-pattern-then-drag-n-drop-midi-files-into-a-Jules-Verne_mish-mash-of unrepeatable-setup-mayhem. In one, clean, coherent tutorial, you've given me the musical instrument I was hoping for oin the first place. Thankyou.

@SwitchyCrystals 2 месяца назад

You obviously went to great pains to make sure this was as clear and accessible as it could be, and for that I thank you. fantastic tut which helped me as an experienced logic user, but new machine mk3 owner. Cheers!

@Startyoungerpage 4 года назад

DUDE. This video is exactly what I've been looking for in terms of fully comprehending how the MIDI controller really functions as a device and not just a virtual plug-in running inside of Logic. Appreciate you! 💪🏽

@stefanguy 4 года назад

Glad I could help out brother!!! 💪🏾

@stobe7675 6 дней назад

Thank you. I was ready to throw in the towel on my Mikro MK3. Thanks for the thorough video. Now I can use the drum kits in Logic!

@ethanmiles7276 6 лет назад

Love this! One thing I added though was tap tempo. I set the tap button on the mk3 to mcu button 89 (click) and inside of logic went to key commands/edit then search tap tempo then click learn new assignment and hit the tap button on the mk3 and it works great! Hope that was clear for anyone who wants to try it

@stefanguy 6 лет назад

Dope thanks Ethan! When I tried tap tempo it went a bit mad for me, as well as with loop and click, Logic began acting strangely. Loop and click was flicking on and off. And the tempo tap wasn't giving me the tempo i was punching in. Not sure if something else I had set up was conflicting with it but I'll give it another crack because it's a great feature to have! And knowing that you've successfully set it up means that it does in fact work! Thanks bro!

@ethanmiles7276 6 лет назад

Stefan Guy No problem let me know if you get it working. Thanks for the awesome videos can’t wait for more!

@starsmash7491 4 года назад

whoaaaaaa i didn't know anything like this existed!!!!! fucking THANK you!!!!!! i'm so excited this shit is finally working after hours of frustration.

@frontdoor333 3 года назад

great video man!!! i have been trying to get maschine to logic to work thru midi for months to no avail...... and you hit it on the nail..with video.... thanks... i hope you are working on mac m1 integration with NI products... i will be watching..thanks again!!!!

@stefanguy 3 года назад

Hey J P, glad this video was useful and helped you with your problem! I’m looking to get an M1 soon. Hoping all of NI’s products are fully compatible by then. Along with hundreds of other plugins!!!

@tarshenry 2 года назад

You are a genius and I salute you! 🙌

@bassdivo 6 лет назад

You are an incredibly gifted and patient teacher, I've been trying to figure out how to do this since Maschine 1.0! You've explained it so simply and beautifully and I'm incredibly grateful. Thank you, sir!

@stefanguy 6 лет назад

Hey Solomon, thank you man, really appreciate the kind words! Glad I was able to help you figure it out bro!

@ArtFrancis 2 года назад

Hallelujah! Bless you my friend. 🙏 Another piece of the puzzle! 🧩

@stefanguy 2 года назад

Glad I could help man! 🙏🏾

@mclovin1498 10 месяцев назад

I appreciate your efforts to get this information to us!! It helped tons. The only problems I’m having is , it’s not recording any audio into logic 😢

@relrecords07 4 года назад

Thank you so much Brother! What a great workaround. Not only did you show me how to use the MK3 as a controller, but you showed me how to bring the sounds into Logic!!! I've needed this for quite dome time. Cheers Bruh!

@stefanguy 4 года назад

Yo brother! Glad I could help man! Much love 🙏🏾

@IVANLEEespinosa 5 месяцев назад

This is a gem! thank you so much, Stefan!

@stefanguy 5 месяцев назад

Thanks and you’re welcome man 🙏🏾

@JesseHolt 5 лет назад

Thank you so much for creating this video. I love the drum pads on the MK3 and was dumbfounded on how to integrate it with Logic. You've brought a lot more productivity into my life with this video. Cheers!

@stefanguy 5 лет назад

Hey Jesse! Happy to hear that I could help! Hope you get on well with the integration!

@StefanClark 3 года назад

BRO THIS VIDEO WAS CLUTCH THANK YOU

@stefanguy 3 года назад

Glad it helped!

@JamesStMichael 6 лет назад

This was awesome Bro! Your convincing me to go buy one!! Please post that video asap of the "deeper integration" you were talking about. Awesome job bro!!

@stefanguy 6 лет назад

Appreciate it James! Yep once I figure it all out *scratches head* lol.

@tbond009 6 лет назад

Thanks for clarifying your absolutely correct. The MK3 acts like a plugin- in Logic with your method this is fantastic! being able to use Alchemy with the MK3 was my goal. Problem solved...thanks to you! Pads: I messed around with my midi connections and the control surface. I have a NeKtar P4 controller and it appears it was the cause of the issue ...once i changed the settings in Logic so that everything runs through my interface (Scarlett 6i6) and not the P4... i was able to record using the pads. Thanks again....your doing amazing work!.

@stefanguy 6 лет назад

Awesome! Glad you were able to solve the problem and get it working man! And you’re welcome I managed to figure it out and had to share! You’re the first person to give me clear confirmation that they have it working so thank you!

@danieljosecastillo-crowe4951 Год назад

Excellent advise and information. Very well explained. Thank you..👍👍

@janwaldekranz2641 6 лет назад

You are absolutely my favorite teacher!! This was a marvelous lesson and the only thing I lacked was to be shown how to save in mk3 as a template so that I never have to do that again. Thanks again and I am looking forward for more about mk3, NI Controller keyboard, and Kontakt. All of them new for me and my studio. :) Thanks from Sthlm /Jan

@stefanguy 6 лет назад

Thanks Jan :). Regarding saving you can save the template by right clicking on the template name and clicking export. And you can save the whole configuration by going to File, save configuration. These are both useful if you're planning on using another mission or sending the set up to someone. Thanks again!

@nikolaivdb 6 лет назад

Stefan, thank you so much for putting this up man, you're a lifesaver! Got my mk3 in yesterday and I'm up and running. You have awesome content on your channel and, as many other have said, you make a really great tutor. So thank you for all your videos, just got the Trap Attack DMD kit as a way of saying thanks (and cause it looks to be a cool patch of course ;-) Again, thanks a lot for all the inspiring videos and I'm looking forward to the next one!

@ricemilk3185 5 лет назад

HEY R.E.S.P.E.C.T STEFAN.. Just got Maschine Mk3 so I'm at the mo, pulling my hair out..lol but it's all working fine after your invaluable tutorial.

@stefanguy 5 лет назад

Haha much love man! I know the pain first hand, glad I could share this with you!

@ma9th 3 года назад

Trank you very much. Very clear explanation to a very complex topic. Happy New Year!

@stefanguy 3 года назад

Thank you! Happy new year!

@JeffyG 2 года назад

This is great! So… use the MCU assignments in the Maschine Editor, then add the MCU control surface definition in Logic. That makes sense, as many control surfaces use MCU like Arturia, Presonus FaderPort, etc. As you were showing the midi CC assignments of the Maschine device in the editor, I couldn’t help but think, why not assign ALL the device buttons to equivalent Logic functions? That would be great, and it’s no secret what the right CC assignments should be for Logic MCU. Is that the advanced version you said you’re working on?

@christophergreer7352 6 лет назад

This is exactly what I needed, thank you so much! Your videos are super easy to follow and very informational. This is the only video I could find that works with the lates version of maschine. Thanks again.

@iriefire6609 3 года назад

Thanks for your videos they were helpful. Right after learning how to do the setup you recommended, I saw on Native instruments site all you have to do is start Maschine before you load up Logic Pro x and it will sync. For me doing it this way, most of the transport bar works (except for restart loop, record count in and couple of other minor things) but you still get to use maschine with the main transport bar stuff in logic with out having to go back and forth in the instance menu when you are more focused on creating with maschine than mixing in logic.

@freshHipHop 6 лет назад

Nice one! You saved me hours of browsing, clicking and starting all over again😉🙌🏼✌🏼👌🏼

@stefanguy 6 лет назад

Haha you’re welcome man 🙏🏾

@murphygreathouse 3 года назад

This is great and just what I needed! Thank you so much! So much easier to record maschine into logic organically.

@nathanelgordon2487 3 года назад

AMAZING WORKED PERFECT THANK YOU MAN YOU WORK IS TRULY AMAZING HELPING PRODUCERS !!! LOVE STEFAN !!!

@stefanguy 3 года назад

Hey Nathanel, glad I could be of help brother! And glad you got it set up and working correctly! Much love bro!

@wildbird78 5 лет назад

I am by no means a gay man but I could listen to your voice all day. P.S. THANK YOU FOR THIS!!

@es0terra 10 месяцев назад

Hi Stefan. This is hands down one of the best tutorials on how to set up Maschine as a midi controller in Logic, even 5 years after you posted it. Question: whenever I load a new kit in the Maschine plugin in Logic, it is changing my group input from drumkit back to off, and all of my sound outputs are changing back to master. So every time I change a kit I have to set everything up again from scratch in the maschine plugin, even though I have saved a template, heck I've even set it as the default. Any suggestions as to what I could be doing wrong? I have patterns turned off, but I have routing turned on in the maschine plugin.

@Baedon2010 6 лет назад

Brilliant tutorial. Thank you so very much. I was lost, but now I’m found.

@himanful 5 лет назад

Thank you so much ..bro you save my MK2 , I was about to throw it in the nex garbage truck this Tuesday...😁

@Marius-wi6ev 4 года назад

Stefan the man. You helped me a lot with this video. Keep it up bro ! Good work

@dez5 5 лет назад

Wow, Great Advance video. You're ready for the big times.

@nmkcompany 4 года назад

If you can't find the 'EDIT'-part of your Control Surface Setup window. Do the following. Go to Logic Preferences > Advanced Tools > activate the Control Surface by checking the box.

@gphiproductions 5 лет назад

Thanks for the tutorial bro! Very well explained! 👊🏽

@stefanguy 5 лет назад

Yo brother, no problem man! And thanks!

@Virtuoustck 6 лет назад

this is damn helpful, NI and Apple should pay you for doing this

@rochfrommars_ 4 года назад

You are a Godsend sir, thank you for this!

@stefanguy 4 года назад

Glad I could help out!

@hightowergaming5301 4 года назад

Hey, amazing vid. Everything worked for me except the pads. I set the channel to 2 on both hit and press... followed everything but still no sound when I hit a pad. Could something have changed in Logic 10.5? It's weird as all other assignments worked. Any help very much appreciated, thanks.

@101Licious День назад

The Transport buttons also trigger high pitched notes in my case

@Marie-ft6sd Год назад

Thank you so much Stefan!! Total precision and clarity !!! So nice 👍 Q: Why am i like in CHORD mode when i want to record in logic pro? Input seems to not work properly, because i can just hear the 1st pad in chord mode as i am switching pads,it is playing the note of the scale with the same sound (with the other pads)....any idea?

@piooyuy34 6 лет назад

This a dope video. I can follow what you saying well. Love your channel Stefan

@stefanguy 6 лет назад

Thanks man! Really appreciate it bro!

@flyo2su 6 лет назад

Thanks for the very clear and concise video, I'm gonna try to set this up, currently I'm arranging in the mk3 then recording the individual audio outs to logic, this looks like it would be a good way to use the mk3 with Logic's plugins like alchemy etc

@stefanguy 6 лет назад

Thanks Rael. Yeah most def regarding Logic's plugins. Assigning the knobs should be pretty straight forward also. Let me know how it goes.

@Lizardwithsideburns1 4 года назад

Thanks so much man, this really hooked me up after hours of head scratching :)

@englishguy9680 3 месяца назад

Great stuff Stefan

@ObeAroundTheGlobe 6 лет назад

I don't even have one but I'm watching this. Good work though

@stefanguy 6 лет назад

Hahaha thanks Obinna! You'll be a pro from day 1 if you ever do decide to get one!

@francissreckofabian01 6 лет назад

Me too.

@PennyBling 6 лет назад

Logic Pro x 10.4 update just got released so we need a video on it right now !!!

@dannykirsch 2 года назад

also you mention at the end of your superb video that you are currently working on an even more advance set up to give you even more control....did you do that in the end and if so how can we do the same?

@Staykool777 6 лет назад

What a great video. I'm setup and good to go because of you. Thanks.

@stefanguy 6 лет назад

Hey you're welcome! Glad you found the video useful and was able to setup successfully!

@maxbouttaz 2 года назад

Thanks for this video. Can you make the same template for Maschine MK1 ? I can't load this template in the controller editor with MK1 or MK2.

@starsmash7491 4 года назад

man.....i seriously don't know how to thank you enough. I've been trying to set this workflow up for almost a week now and keep wondering if it is worth it with all of this hassle and i find your holy grail of maschine midi mode tutorials to put an end to 90% of these problems once and for all. THANK YOU. Did you ever get tap tempo working? I saw in a comment in your video that it acted wonky, as it did for me at first (glitchy and always active), but it settled after just unlearning and learning it back again. it still does this weird sustain on the instruments if the tap tempo is timed at a certain part, but regardless, it is normal during playback and the tap tempo is maintained.

@stefanguy 4 года назад

Hahaha, so sorry for the late reply! Glad I could help man! To be honest, I can't even remember if I did or not. Native shortly came out with a firmware update that had tempo tap I believe. But honestly I haven't used Maschine in this way for such a long time I can't even remember.

@starsmash7491 4 года назад

@@stefanguy how do you use maschine now if i may ask? I'm still ironing out the kinks in my current workflow, but am always open to new ideas.

@stefanopollastri6424 2 года назад

Thank you very much for the video! However, despite following the steps I don't manage to get the midi recording directly inside of Logic pro. Native instrument technical support did not solve the problem. Would any of you fellow producers be kindly available for advice on how to make it work? Thanks in advance to any gentle soul :)

@JamesStMichael 6 лет назад

An incredible feature would be to set those 8 buttons on top of the lcd screens to control control note repeat parameters and values like in the masculine sonftware when using the studio. I sold my old studio because I never like working inside of masculine software but I miss that feature soooo much and wish Logics note repeat feature could be countrolled by mascons mk3 buttons in the same respect! Think you can program this bro?? If you can I would be convinced to go buy that shit right now!!!

@stefanguy 6 лет назад

Hey James, sorry for the late reply brother. I haven't attempted incorporating the note repeat yet however I think it's going to be real challenging. The only way I could think of doing it off the top of my head is to use Logic's arppegiators but that will become very problematic as you'll need to always add MIDI fx arppegiators to your tracks and program them. I'm not sure if there is a way to do it via Logic's environment, I'll have to sit down with it again one day to try and figure it out.

@salvatore3981 6 лет назад

Useful video, I set my button according to the video, but it didn't respond to logic Pro x, and the rest could be used normally.

@BobbyWashingtonvlog 3 года назад

Man it almost worked in Studio One but it’s missing something. I can see the midi is being triggered when I hit the pads but now sound. Can you please help? I’m willing to pay for 1 hour of your time

@londoncinemastudio3073 4 года назад

Hi Stefan, have you found a way yet to get Maschine MK3 triggering inside Logic without needing to be in Midi Mode? Its not ideal as you lose a lot of common indicators in midi mode and it would be a dream to be able to be able to record Logic just as you do into Maschine software.

@whiteclouds247darkclouds 10 месяцев назад

Hi Stefan! Thank you for this tutorial. I have a query. Could you please guide me on how to set up the Maschine Mikro MK3 Transport with logic. Like I want to control the transport of logic through Mikro MK3 hardware. Please help me out. I finally got the MIDI mode working. Please help me out with this. I followed the steps in the tutorial but that is for MK3. I want help to set up logic transport with Mikro MK3.

@DOBBYau 2 года назад

This guy talking like ☝🏾🤟🏾👈🏾 Seriously tho, this is a very helpful video thanks!!

@b.l.a.productions896 5 лет назад

bro, I can't thank you enough. 🙏🏾🙏🏾🙏🏾

@b.l.a.productions896 5 лет назад

To those with an MK2 follow these steps and adapt as needed. Topman Stefan

@stefanguy 4 года назад

You're welcome!

@geekanoids 5 лет назад

Great video, thanks so much for sharing. In your opinion is there an ideal pad controller that works directly in Logic?

@grglcs 4 года назад

Hello, I've done everything that you said and it's got me close but i still cant record midi notes in logic. when i press record it still records it in Maschine. Any thoughts?

@oshaymusicgroup 2 года назад

I followed the video precisely, other than choosing a different color for group D but my pads are triggering anything inside logic....i wanna use the pads to record instruments, not drums inside logic. any help?

@ryanjackson5437 4 года назад

Thank you! So helpful. Towards the end you said we can save the Maschine plugin settings as a Template or Patch...is this done within Logic or in the Maschine window somewhere? More info on that would be great. Your videos are the best out there for Maschine and Logic! Thanks again

@ryanjackson5437 4 года назад

Nearly everything is working...When I record, it still loops in the pattern setting within the Maschine window. It records in Logic the way it should, but it loops it in Maschine. How can a disable the patterns in Maschine?

@messypro1 5 лет назад

thanks

@mattrogers1052 4 года назад

Great video sir! NI does not support this with the Mikro Mk3 though huh? Think you could talk to the big people upstairs about this :-)?

@oshaymusicgroup 2 года назад

Here's the problem I am having....when I set the mackie control input to maschine virtual input i get transport control but i lose the pads....if i take it off maschine virtual input i get the pads back but no transport control

@Emma-qm6tb 4 месяца назад

Hi, I got the MK3 to show sound in the Logic meter and play sound out my output but when I hit record it triggers the preset demo song that comes with the expansion packs kits. I can still trigger the sounds with the individual drum pads but I cannot figure out a way to stop the preset demo track from playing. And neither my input nor the preset demo song loop actually records into Logic. It only shows on the meter and plays thru my output. Any ideas? Much thanks!

@SuperAjej 4 года назад

Your a genius 🤘🏼 thanks man !!!

@leichang1032 6 лет назад

Huge help! Thank U so much sir!

@StefanClark 3 года назад

You are a balllerrrrrr

@Matt_Morgan 4 года назад

Where's the updated video that you spoke of at the end? can't find it on your channel. I really need the fixed velocity button and pitch strip to work.

@rowanturner9726 6 лет назад

Dope tutorial. I’ve set up everything in the vid thus far. I’m trying to configure the count in for recording. Can that be done via this method?

@westwalnutrecords Год назад

Trying to figure out how to use the shift button + pad 1 for undo

@dannykirsch 2 года назад

@Stefan Guy or anyone reading this is this still the only workaround or have Native Instruments come up with their own solution for both the transport and pads to work inside of Logic Pro X now and not to have to be in midi mode?

@jamandspoonmusic 6 лет назад

Awesome and very useful Stephan! Have subbed. Quick question- can this whole setup be saved in Logic and Maschine so you can fire up the gear and go or does the setup need tweaking every time? Thanks again🙏

@andresalejandrosalomon 6 лет назад

@stefan: hey man! Great vid! I just went through it and my record button will record in maschine but not in logic and I am also not getting and midi notes in logic, any suggestions?

@Wheethepeople 5 лет назад

Hey Bro... best video I've found so far! Thanks! Everything goes smooth until I get to about (10:30)... When I use Maschine as a plugin the record button doesn't trigger in logic. I get sound, but no midi events record into logic??? I can use it as a classic trigger for a logic sound, but that seems limited, as I only seem to have a 16 key range, starting on C2, with no way to change on maschine... Any suggestions on where it went wrong? Thanks for all the help! I'll check out your links above!

@Veyelet3 3 года назад

thanks my dude, mad luv

@stefanguy 3 года назад

Glad I could help!

@kwekut6448 3 года назад

i followed suit with your instructions but my maschine mk3 mikro didnt work as youras did . .. any help ?

@YoussefNassarmusic 6 лет назад

Hello Stefan, amazing tutorial! Thank you so much! One question though, If I need to add the NOTE Repeat/ARP button, which one would it be when it comes to assigning it? Thank you!

@spaceinvaders35 6 лет назад

Before asking my question, I would like to thank you a lot man ! Your Job is incredibly helpful, you can't imagine how much you help me right now. But I still got a problem with my MK3 inside Logic Pro X. I follow every step of yours videos, I connect with success my MK3 inside Logic BUT the problem is when I open Maschine 2 in logic as a VST in 16x Stereo. I follow what you say to do : - I'm in Pad D / + Pattern is delected / Then I go in "Group", put the Input and change it to Drumkit. When I'm playing, the notes doesn't appear in Logic, it's get stuck in Maschine VST and it isn't like in your video when you play record. Can you Please, please, please help me with that, I don't know what to do man. Thank you again for your great work. (Scuse my english, shout out from France)

@beatsbydaku 5 лет назад

Are you in midi mode while trying? press shift+channel in the left top corner of your mk3 and try again. Hope this helps 🙏🏾

@edasilva8125 4 года назад

@@beatsbydaku This question and reply saved me hours of frustration! Thank you to you both!!!

@pauluszarv6812 6 лет назад

Great! Simply great. Subbed

@stefanguy 6 лет назад

Thanks Paulus!

@noisythealien8761 3 года назад

I've been trying to get this FOR MONTHS and still can't...I'm using a MK2 n it'll only record inside of the plugin:( what do I do

@user-cu1qz8jw6q Год назад

本当にありがとう　Thank you so much!

@macbully4230 5 лет назад

when I open the control assignments, it doesn't give options. it just shows me a picture of the Mackie. please help

@DrCoy 6 лет назад

Perfect! Thank you Sir!

@lavoicebrandon27 6 лет назад

Great video, how can I use Maschine to control a drum synth? Primarily it’s pads and knobs?

@saintbernard537 4 года назад

This helped me so much thank you. Do you know what the parameter ID’s are for the tap Metronome & note repeat buttons are?

@stefanguy 4 года назад

Glad I could help Brent! I’m not sure they work you know but go to www.native-instruments.com/forum/threads/mackie-control-mcu-parameter-id-codes-template.266581/ for all the parameters

@Trinibest1 3 года назад

Why thw connect on controller editor is not lighted on my controller please help

@Giddy1. 5 месяцев назад

Thank you

@evanwanous2466 4 года назад

HELP! Can you record chords into logic? So far I can only record single notes when using melodic instruments..

@stefanguy 4 года назад

Unfortunately not Ev :( not as far as I'm aware at least!

@evanwanous2466 4 года назад

Stefan Guy no biggie, thx for all your help!

@BlackieBeats 5 лет назад

Hey stefen have you figured out how to set quantize?

@maddogmorgan 6 месяцев назад

THANK YOU

@rulingrecordstv6815 6 лет назад

How can you actually get productive with a workflow like this? I have Serato Sample and some logic stock sounds that I'd like to use together with the maschine I just bought, but is such a workflow really musically inspiring?

@swanebrokendeep 4 года назад

hi stef tnank you fot this video. Ca we configurate the note repeat on maschine to write trigger notes directly in logic?

@stefanguy 4 года назад

Hey bro you're welcome man! In regards to note repeat, not as far as I'm aware!

@tobiiiiii 4 года назад

Hi Stefan! I am using Logic Pro X for a few years now and would like to move most of my production workflow to a hardware controller. I really love the idea behind Ableton Live & Push but it would replace my beloved DAW. That’s why stumbled upon NI Komplete & Maschine. Would you say that Native Instruments is a serious competitor for Ableton while having the opportunity of using Logic as DAW? Would NI Maschine help simplify my workflow of producing Trap and RnB songs instead of clicking, dragging and dropping? Also thanks for your awesome videos!

@stefanguy 4 года назад

Hey brother! Thanks for reaching out. Although I have no experience with Ableton Live & Push I do know that using Maschine in Logic unfortunately will not do much good for your workflow lol. Maschine is amazing but it works best with its own software much like Live & Push. You can use Maschine’s plugin in Logic but you’ll work much faster if you switch to the maschine software in my personal opinion. Then potentially mix in Logic. Right now I use my maschine as a glorified MIDI controller inside of Logic as I don’t really sample. Thus it’s no different to just have a MIDI keyboard. If you want to do everything on the hardware go for maschine with its standalone software. Again I can’t speak for ableton but I’m guessing it’s the same.

@tobiiiiii 4 года назад

Stefan Guy thanks for your answer and opinion! I’ll investigate further in the NI Komplete workflow and how to import the project into Logic Pro X for mixing. But since I am able to use NI Komplete either as plugin or as stand alone application I think you can do nothing wrong. Thanks for your help 🙏

@STRAIGHTP 6 лет назад

perfect! thank you

@stefanguy 6 лет назад

You're welcome!

@1914_ 6 лет назад

Stefan urkel on da beat

@dirkhoyer1492 4 года назад

Hi Stefan, thanks a milion for the tutorial, super-well explained. However I got stuck at the moment when I tried to set up the Mackie Control on the control surface of Logic X because there was an existing Maschine MK3 button (I tried to install the Maschine before) which I could not delete. After installing the Mackie Control I was not able to open it (the icon shows a yellow exclamation mark). I cannot go further from here. Would you have an advice what to do in that situation. I would be really grateful for any kind of help I could get.

@PavanSibal 4 года назад

Thanks Stefan. I was successfully able to setup. Any way how I can assign knobs to logic smart controls?

@stefanguy 4 года назад

Thanks man! Yep check out this: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-O-w6JJI5LGo.html

@PavanSibal 4 года назад

Thanks Stefan, this way I will have to assign everytime I load an instrument track. Is there a way that we can set all 8 knobs assigned to first 8 smart controls globally like the way you helped out setup pads using Mackie control.