Utility Trailer Floor Replacement

Подписаться 51 тыс.

Просмотров 414 тыс.

50% 1

Website Article: www.stoneandsons.net/utility-t...
Get our free e-book, '6 Fun Step-by-step Projects': www.stoneandsons.net/6funstepb...
Receive our latest content: www.stoneandsons.net/newsletter
Tools I use:
Miter saw: amzn.to/2mD5lkV
Table saw: amzn.to/2nASQps
circular saw (alternative tool): amzn.to/2nj39MQ
Speed square: amzn.to/2mD3Z9M
Angle finder: amzn.to/2nAPtyR
Digital angle finder: amzn.to/2nVrBaf
Bandsaw:amzn.to/2q3Lqcs
Router: amzn.to/2q3poGW
Router bits: amzn.to/2robwuX
Table saw (*upgraded version): amzn.to/2pcmEGF
New table saw blade (recommended): amzn.to/2qDJQip
Circular saw (alternative to a table saw): amzn.to/2pcDrtl
Jigsaw: amzn.to/2pJn48E
Drill and Impact: amzn.to/2p9tlsc
Kreg Jig (pocket holes): amzn.to/2q2ZZRq
Counter sink bit: amzn.to/2pctts1
Random orbital sander: amzn.to/2qwRQVd
Tape measure (lefty/righty): amzn.to/2pKZTwC
Tape measure (flat back): amzn.to/2q3PltA
T square (4'): amzn.to/2q2PJbK
Bluetooth hearing protection: amzn.to/2p9WBiy
Safety glasses (add-on): amzn.to/2pJExOv
Saw horses: amzn.to/2q6Qjo9
Hole saws: amzn.to/2pplIDm
Forstner bits: amzn.to/2qZ4E6X
Paste wax (for the drawer slides): amzn.to/2r57qE2
T-track: amzn.to/2pcK7HS
Miter track: amzn.to/2p9H1n5
Pegboard: amzn.to/2pL3MBO
Vice: amzn.to/2pKYXbP
Bench dogs: amzn.to/2qEWs8L
Dust collection: www.stoneandsons.net/tools

See more tools we use: www.stoneandsons.net/tools
///Sign up for our NEWSLETTER\\\ so you don't miss anything,
IT'S FREE: www.stoneandsons.net/newsletter
///SUBSCRIBE TO OUR MAIN CHANNEL\\\
/ stoneandsonsworkshop
///SUBSCRIBE TO OUR SECOND CHANNEL\\\
/ @stoneandsonsworkshop2
///SUPPORT\\\
/ stoneandsonsworkshop
///WEBSITE ARTICLES\\\
www.stoneandsons.net/blog
///WEBSITE\\\
www.stoneandsons.net
__
///MY CAMERA\\\
Canon T6i: amzn.to/2e6gGnI
///MY TOOLS\\\
www.stoneandsons.net/tools
__
///FOLLOW ME ON\\\
INSTAGRAM:
/ stoneandsonsworkshop
FACEBOOK:
/ stoneandsonsworkshop
TWITTER:
/ stoneandsonsws
///CHECK OUT MY OTHER VIDEOS\\\
I Quit My Job To Be A Woodworker: • I Quit My Job To Be A ...
Kids Activity Table: • Kids Wooden Activity T...
Kids Activity Chair: • Kids Activity Chair - ...
Drill Charging Station with Storage: • Drill Charging Station...
Clamp Rack with Safety: • Clamp Rack with Safety...
Dust Collection: • Dust Collection System...
Dovetail Frame: • Dovetail Frame - Hand ...
Farm House Table: • Farm House Table with ...
Installing a shop air cleaner: • Shop Air Cleaner - Ins...
Build a bench from a bed frame: • Build a Bench from an ...
Bench vise and dog holes: • Bench Vise and Dog Hol...
__
If you want it, Make it! Thanks for Watching!

Хобби

Опубликовано:

31 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 220

@nfiedler7 Год назад

Love this book! ru-vid.comUgkxpCNxqmAkyjN6NPx1fyB7QiEFWyO5mUWL it is simply one-of-a-kind! I really love it, because karah explained all tools required to have the job done, not mentioning the fabulous diy pallets ideas. I'm pretty sure this will be a fresh start in my new endeavour. Amazon was great, they delivered on time. Thank you!

@mpsdadlife8823 Год назад

Thank you, my dad passed away recently and left a run down trailer that needed replaced. That info was just what I needed. Thanks again

@easymunee123 4 года назад

Straight and to the point. This is how a DIY video should be done. Subscribed.

@sevennumberss Год назад

I did not know that angle iron could come out. That makes replacing the deck so much more easier. Thanks for uploading this video!

@sunguy527 4 года назад

Thanks for this video! I struggled for hours trying to figure out how to approach this on my trailer and didn’t realize that rear lip came off. Thanks again!!!

@dorcasowens1210 4 года назад

Repainting the cross braces of the trailer while the floor was out would have been value added. Also treating the floor boards with Thompsons water seal before installation would have added years to the wood.

@JackmanWorks 6 лет назад

Awesome, that was easier than expected! Mine is going to need the same treatment soon, but I won't put it off a long as you did ;)

@chuckbowen4334 5 лет назад

Most trailers are designed for conventional lumber, with out ripping. Spaces between the boards is usually not needed because the boards shrink as the get old and dry out. It's usually 11 2x8....or 10 2x10...I build theses trailers for a living.

@darrinmiller8030 5 лет назад

Perhaps you can help me. I inherited an old flat trailer, with no wood floor. There is a channel on the front and the back of the trailer. How do I put the boards in so that they catch in both channels? There are no screw holes in the support angle iron underneath, so somehow the old boards were put in place without being screwed down.

@tonysimpson6873 5 лет назад

@@darrinmiller8030 I'm in the same boat. I have no idea how to put the new boards in

@minojones8429 5 лет назад

Darrin Miller you can cut the bead of the weld at the end of the angle iron so you can lift it out and put the boards in and then either tack it back down or screw it back on like in this video. I did it to my trailer and it went well.

@Duncan984 2 года назад

Hmmm

@aidenchaffee5568 Год назад

What should I use on my 6x12 with out having to rip the last board?

@freshnup 2 года назад

The best and simplest video for this that I have seen. Great job and thanks!

@JP-xg8cd 5 лет назад

This is awesome thank u guys just what I needed for my 6x12! 👍🏼

@aidenchaffee5568 Год назад

What wood did you use for your 6x12

@LesterElm1 6 лет назад

Excellent job on the trailer. Love your vids. Thanks for sharing.

@StoneandSonsWorkshop 6 лет назад

+LesterElm1 Thank you!!

@VeryMuchBlessed 5 лет назад

Good video and tips. Thanks for this.

@healthiswealth7324 2 года назад

Super helpful - thanks for the time saver !

@NV..V 6 лет назад

Another great video. Thanks for posting. I especially like how you skipped over the "quiet cursing and frustration" phase of the stuck bolt situations...

@StoneandSonsWorkshop 6 лет назад

Shhhh.... Lol. Glad you enjoyed it.

@albertkazemian603 Год назад

Nice video, I have a 5×10 heavy duty trailer that needs new flooring. That was a great video. Thanks

@robinlewisart_1997 3 года назад

Great job now I have the motivation to do mine

@2003pblakey 4 года назад

Good info here! Thanks for sharing!

@vincentalexvigil4671 6 лет назад

Nice work Shawn!

@StoneandSonsWorkshop 6 лет назад

+Vincent Alex Vigil Thanks!

@dillonwells5649 4 года назад

What kind/size screws to hold the boards down to the metal or you only screw the ends of it

@atvatv8391 4 года назад

Thanks for the tip great video

@joemoneytaker1766 2 года назад

Perfect instructions, thank you sir

@practicallyIndependent 6 лет назад

That came out nice. Thanks for sharing. A new trailer deck is refreshing. I did mine about 10 years ago. It was long overdue as well. See you next time!

@StoneandSonsWorkshop 6 лет назад

+DIY Dillon Thanks! It’s definitely refreshing.

@joedonabdrnathy7603 6 лет назад

Dillons Woodworks b

@SlipperyPete42069 3 года назад

Here in Arizona wood gets recked by heat and sun in just a few years. Thanks for this.

@hogster5935 3 года назад

Mine has those same rusted mounting screws. I will cut them too and wood as well. Nice vid.

@FredMcIntyre 6 лет назад

Nice job! 👍👊

@StoneandSonsWorkshop 6 лет назад

+Fred McIntyre Thanks Fred!!

@anajoaquina6803 Год назад

Thank you for this vieo. Would you tell what kind of wood you use or is the best for this project? TY

@stephencurrie1742 6 лет назад

Once I went to that trouble think I would have cleaned it up and give it a coat of rust proofing. Know your a busy man, is that what we call in Aussie treated pine!!!!

@paulsilverman2944 3 года назад

Just use old engine oil after you change your cars oil why waste of money with store-bought stuff

@billsimmons2898 3 года назад

or at least some Undercoating to kinda slow down the rust creeep..

@18winsagin 6 лет назад

Durn nice job, looks good and done right!

@StoneandSonsWorkshop 6 лет назад

It’s solid. 👍

@18winsagin 6 лет назад

Stone and Sons Workshop I'm about to do my 5x8, the stamped metal is shot and I'll take the real bad stuff out and want to go back with maybe 2x6 boards or I kind of thought about looking at those poly decking boards since I only haul my mower and some light stuff around the house.

@jeremycondon3692 6 лет назад

I have found PB Blaster to be a great rust penetrant. Regardless, the sawzall worked. Nice job!

@StoneandSonsWorkshop 6 лет назад

+Jeremy Condon never heard of that. Thanks!

@robertharris2432 5 лет назад

I found Freeall is much better anything else. I tried PB blaster and it did crap. Then I used Freeall, loosened in minutes.

@Praise___YaH 8 месяцев назад

Guys, HERE is our Savior YaH The Heavenly FATHER (Genesis 1) HIMSELF was Who they Crucified/Pierced for our sins and “HERE IS THE PROOF” From the Ancient Semitic: "Yad He Vav He" is what Moshe (Moses) wrote, when Moses asked YaH His Name (Exodus 3) Ancient Semitic Direct Translation Yad - "Behold The Hand" He - "Behold the Breath" Vav - "Behold The NAIL"

@filipinophreak 3 года назад

I just did the samething today , how did u take off the screws that u cut off ? Did u use a punch?

@paulsilverman2944 3 года назад

Here’s a trick for everybody...... every time I change the oil in one of my vehicles I collect the spent oil in a 5 gallon pail and then every couple or three years I pour the oil onto the deck of the trailer and sweep it in with a broom I would buy for $1.50 at the dollar store which I would later throwaway Oiling of the deck does 2 things: it prevents the deck boards from rotting and it prevents the deck from shrinking without doing my trailer which has a 16 foot long footprint lost 2 inches, when we tried to load cargo which was exactly 16 feet long we were unable to close the back doors,these 2 inches came back a few days after the trailer deck was oiled

@rickeykeeton4770 10 месяцев назад

How did the gap work out after the new boards dried I have read different opinion in regards to spacing new wet pressure treated boards for my 5x8 utility trailer.

@mr.e-manm5062 3 года назад

Thanks a lot for the video

@Bayonet-Taboo 11 месяцев назад

Question: my trailer has 2 rows of additional fasteners along braces a couple of feet fore and aft of the mid brace. Did you just decide the additional fasteners were unnecessary?

@eddieangel963 3 года назад

What size of wood did you use?

@5thid738 3 месяца назад

Were there any screws besides the end caps that you re-installed? I'm getting ready to do this on my trailer. Thanks.

@rightyouareken7587 9 месяцев назад

Did the torx screws come out easily :12-16 second mark. And did you screw the boards back into the frame?

@zackk2746 Год назад

Such a great video

@paulremnantone1102 Год назад

What size boards did you use? I have 1x6 I would like to go up 2x10 Will it work?

@dougrichardson1980 Год назад

Is the new wood just laying in there or is it necessary to screw it down? Seems like it would be tough going through that metal.

@ELVISRN1 4 года назад

nice!!

@wearegame777 3 года назад

A manual impact screwdriver is priceless for rusted screws

@JDLMCLOW 6 лет назад

Nice simple fix...............They don't always go that way...... Was that a rebuild trailer?

@benthallm Год назад

So you don't put the same type of bolts back in? You use wood screws from the bottom? Will that hold as well as the original bolts?

@noahriding5780 5 месяцев назад

Do you have to space the oards? Or can you have no space between? thanks

@Bill-1005 5 месяцев назад

You mention securing the board’s underneath the trailer. Is there a video on those? Thx

@tormentor400 4 года назад

no screws or bolts in boards down the length only ends>?

@geraldmiller5260 3 года назад

Unless you paint the frame with rustproofing primer and paint, the job is only half done, and will lead to unnecessary work in the future.

@jameslester3861 2 года назад

WD 40 is a water displacer(WD stands for “water displacer”)NOT a penetrating oil. Use Kroil, PB blaster, or ATF/ acetone mix.

@kayeyeager8006 2 года назад

PB is my go-to as well.

@williamrodriguezmswlcsw8119 2 года назад

You are correct, but wd40 does offer some penetration. Check out the comparison on project farms channel. Very interesting results. 👌

@stevewalker7822 6 лет назад

Good job, Shawn. That repair should last you quite awhile now.

@StoneandSonsWorkshop 6 лет назад

+steve walker yes it should. Thanks.

@JimDockrellWatertone 6 лет назад

Now you can take a trip to see Matt Cremona and buy some slabs!

@69virgin1966 6 лет назад

Looks great Shawn. Did you use treated wood? That is a really nice size trailer. That is something like what I want to get for my next trailer. Thanks for sharing

@cra2cra226 3 года назад

At 5:09, you nailed the retaining bar down onto the boards. But the boards (with retaining bar) aren't connected to the trailer at all, right? So a crazy bump could lift the whole rear of the boards a couple of inches and it could start sliding rearward, correct? Especially if you removed the rear gate in order to haul kayaks or something a bit longer than the bed. I think I'd put 4 or 5 holes in the front retaining bar, too. The one that's still welded down. And driving screws in there would mean the boards couldn't "jump" and slide out of the deck, no matter how big of a bump you hit.

@warrenmichael918 Год назад

I see that the same way. I have almost the same front and rear angle iron set up on my trailer with no screws holding the boards down to any cross members in the middle, EXCEPT i made sure to use bigger screws to go through to the frame at the end of the trailers frame at the end.

@user-zy1ky5qg1k 4 года назад

What size were the boards

@bryangatewood6749 5 лет назад

No need to space newly purchased treated wood. It’ll dry and shrink. Good job!

@FredMiller 5 лет назад

Absolutely!

@LifeWithKernelLee Месяц назад

Both my angle irons front and back are welded in

@josephmccaslin1513 4 года назад

Nice job. One suggestion i have though. Instead of waiting until the last board to rip. Get your measurements and put the ripped board in the center for a more symmetrical look. Thanks

@talkingcargojunkremoval 3 года назад

A wise man speaks 👍👍👍

@AK74Man87 3 года назад

Definitely, was told to start in the middle and work out. You can possibly make the two end boards more narrow if possible.

@cfbarnett Год назад

My plan is to start in the middle and work to the sides. That would leave the narrowest boards on the edges rather than in the center. It's one concept anyhow.

@robkober9139 2 года назад

Both pieces of angle iron on my Big Tex trailer are welded. Anyone else have this? Is there a technique to replace the floor boards w/o cutting those welds?

@Tom-mu7zy 10 месяцев назад

Where do you find wood that straight?

@UltimateMMAFan83 26 дней назад

How does it keep it down for a right snug fit

@patriciareynolds2729 Год назад

Used spray undercoating on the siderails after cleaning off loose rust.

@foodboy767 5 лет назад

Those are M30 star bolts. Your bit was probably too small and stripped the bolt pattern. How do I know this? Because I did the exact same thing! Great video, thanks!

@tlc5343 4 года назад

foodboy767 ...... T30

@rastaming6884 2 года назад

How much would that cost in 2021 lumber $?

@sumosprojects 6 лет назад

Treated material as a replacement, is it silly to say a coat of paint adds to the longevity of the timber ?, not sure but my dad always painted most projects so I’m in that mould of thinking 👍

@StoneandSonsWorkshop 6 лет назад

+Sumo's Projects if I do anything, I’ll eventually add a sealer. I really dislike painting. Lol.

@craftman5632 4 года назад

On your stripped screw heads try an angle grinder, and make a slot in the head and try a Flathead bit. while all the boards are off might as well get a wire brush and get as much rust off the framing as possible, and repaint it.

@StoneandSonsWorkshop 4 года назад

At this moment i was just interested in a functional trailer. Later on I might rework the entire trailer.

@bobt2522 6 лет назад

That was a good simple project. When you were struggling with the screw, you said you couldn't get under the angle. You could have cut through the wood to get to the screw. We tend to forget that we can destroy the piece we are replacing. While you had the deck off did you inspect the wiring. On my nearly new trailer, the wiring is not up to my standards. I haven't felt motivated to crawl under it to fix the wiring.

@StoneandSonsWorkshop 6 лет назад

+B Templeton Haha you’re right I could’ve cut the wood, and yes I did check the wiring. I was going to add the whole wiring thing to the video, but that it was a little bit off topic.

@n5uge12 2 года назад

Great point. Thanks.

@cfbarnett Год назад

@@StoneandSonsWorkshop My boards were so rotten that a grandson had a great time with a sledgehammer beating them to death.

@SUBJECTISOLDMOVEON 4 года назад

Great video mine little different homemade built from previous owner at the gate I didn’t have screws on top nor bottom. I was told to remove gate then cut angle iron or bar that it slides in then re weld crazy huh. I can tear it up just need to get a good solder kit now lol.

@jaywilliams415 2 года назад

I wanted to put my safety glasses on watching your attempt to remove that stubborn screw! Lol

@jasonhogue4585 2 года назад

Excellent to the point and informative! Question, my trailer is nearly identical except it is 12’ and the rear angle iron or channel is not removable. It is welded all the way around the entire perimeter. Have you seen this before and have any recommendations? Thank you

@agentleebs 2 года назад

Mine was 16 ft. I used a hydraulic jack underneath (with a scrap of wood to not dent the trailer wood, to bow the board to get them out. Reversed the procedure to put the new one in. Two people would have made the replacement easier, I used a clamping system to push the one end down. Once it’s lined up, then you can ease the jack down.

@SmokeyBear363 Год назад

Cut a piece wide enough to slide and remove the boards

@cfbarnett Год назад

@@agentleebs I have a 10 foot long trailer and have the same issue with the rear angle iron. Bending a practice 2x6 but think that if I bent it enough to slip it in there it might break. Over a 16 foot span that would work easier. I have to do some more research on this. I can cut the boards shorter so the bend might work but would like to have as much length under the iron as possible. I welcome any help you might have.

@cfbarnett Год назад

@@SmokeyBear363 Not sure what you meant, Mario.

@cfbarnett Год назад

Reading further I see that people have cut that angle iron in the back and then rewelded it or screwed it down somehow. I'm going to research that.

@johnnycortez46 5 лет назад

At the very end where you screw the angle down to the boards. Does it hold the boards down? It dont flop up in the back? mine is welded. I am actually fixing to redo my boards but don't have a welder to re-weld it. but if your method works then I'll go that route.

@freedomgunsandliberty 5 лет назад

Yeah it looks like it would flop around. Mine's welded also so I have to cut the angle off then reweld it. Luckily I have a welder. Go buy you one at harbor freight cheap and if you don't want it after the job then return it 😉🍻

@jsboening 4 года назад

Just bow the boards up in the middle so you can get the ends to slide in the groove then release them.

@markbordenick9772 6 лет назад

Did you screw the boards back on from underneath the trailer?

@seanchildress3137 4 года назад

That's my question as well. Seems like the trailer will flex and eventually warp or cause welds to fall under load.

@technicaltrucking8704 4 года назад

I'm really surprised you didn't paint that metal with a rust stopper paint when you had it exposed

@indoorcomfort6021 3 года назад

Same thoughts

@cfbarnett Год назад

I read an earlier reply to a similar question. The original poster said he would do that at some time in the future but he was in a hurry to get a functional trailer up and running.

@blueninja227424 6 лет назад

Might be a silly question but...Did you make the small gap between boards just for water drainage?

@r.b.dickson8825 2 года назад

I never again put a space between the boards cause they will shrink in time creating the perfect gap..

@nickpoole583 Год назад

What type of screw did you use to secure the decking to the trailer?

@warrenmichael918 Год назад

I dont think he did. It looked like the front edges were under the front angle iron and the rear was also covered by that piece of angle iron. I just wondered if the rear boards could still bounce around because i dont think the 3 screws were into the trailer frame to hold them all down.

@OfficialDSFN Год назад

What size wood is this?

@letswalkinthewoods1462 5 лет назад

I'm gonna go ahead and do that. I went ahead and did that. Do you ever get to far ahead??..😀😉😉

@paulgarcia3797 Год назад

what size are the boards? 2x6? 2x5?

@gerardocortes8627 3 года назад

What sise it's the wood

@JoeDavis82 6 лет назад

I use used motor oil cut with diesel to preserve the treated lumber on all my trailers. Just a thought. Great stuff Shawn. There are a bunch of people out there that would just trade it in instead of what you did (the right thing)

@DarkLinkAD 5 лет назад

How long does the smell last?

@briangarcia2358 5 лет назад

@@DarkLinkAD I was thinking the same thing. I park my trailer in my garage, and I dont think I'd be able to ever do that again. I would bet the smell will always be there

@daverea372 5 лет назад

No just no. Used motor oil will rot your lumber! Its what people pour on old tree stumps to rot them away,..why? Cause it does!

@smsteger89 2 года назад

I don't think I would use anything like used oil, but the idea is true, you want to oil your deck at least every couple years.

@brich2929 Год назад

@@daverea372 no it won't. It preserves it.

@hphillips7425 3 года назад

The only thing I plan to do different on mine is once the boards are cut to size apply the preservative on all sides then install

@smsteger89 2 года назад

Technically all it really needs is oil. There's no point in finishing a trailer bed. The finish will just come off quickly if you use it with any regularity. Any kind of oil will do, just do it every so often. Not like every month, just maybe once a year or two.

@frankgrimes342 4 года назад

So did you only put screws in the end with the angle iron cap ?

@frankgrimes342 4 года назад

Scratch that watched it over again

@johntarabocchia 4 года назад

My Tip: For cosmetic purposes only, I would have placed the cut board in the centre of the trailer floor.

@rb79er 4 года назад

Probably not in the middle as the hand cut line would not be as straight. For cosmetic aka symmetry, he could have cut the piece on the other end, but that's more work and no one really cares as it is just a trailer bed :)

@Lhenry-pf5zn 2 года назад

Thanks, good job. When you get to my age you will realize the benefit of knee pads.

@joseramirez9932 2 года назад

Wat time i go look for

@ClimptonDiddlehopper 6 лет назад

Well the only way I've ever done replacing decks on trailers car and semi is drill out the heads on the angle or retainer piece. Then remove the loose broken boards. Then seawall all the screws flush with the lower frame work. When reinstall you font have a bunch of holes in it to get lined up just drill new and run in decking screws. I did tons of trailers whern I worked in my apprenticeship and early when I worked at Ryder and other truck shops. The young guy gets the hard jobs. The old mechanics said we still had gristle for a spine so it wouldn't hurt us. Lol

@cra2cra226 3 года назад

plz post a video. not sure i follow.

@coffeemaninsanity8596 Год назад

I simply cleaned the head out with a screw and compressed air and worked the impact forward and reverse until they came out no lube. The lube will make the heads strip

@jeremythompson6969 2 года назад

just curious my trailer the boards are screwed down every few feet to a cross bar. when i put new wood down how would i line back up to those threaded holes? Somehow i have to make holes in the new boards to line up to the threaded hole in the trailer cross bar. any ideas?

@jeremygifford1705 2 года назад

You'll have to drill your boards from the bottom side under the trailer through the existing holes in the crossmembers. Its easier if you stand your trailer up on it's ass end although that's easier said than done.

@jrdickersonish 2 года назад

I did this last year and watched this video just to see how he handled it. But he only showed himself sliding under the trailer. The rear angle bracket is the hardest because it has to go perfectly through 2 holes. I made a drill guide to insure I kept the bit straight and drilled from underneath. Once you make that first hole, put a bolt in it to keep it from moving while you do the others.

@jrdickersonish 2 года назад

I wasn't careful on one hole in the crossmember and drilled it bigger so the threads don't catch. That board bows up at that point. Since the bolts are cutting bolts, the drill bit can be slightly smaller than the hole and avoid reaming out the hole in the metal.

@jamesstrickland367 Год назад

What about boards with screws down the boards?

@billsimmons2898 3 года назад

Just wanted to share this, Kroil is far superior to WD 40 to get into stuck screws and bolts in about the same soak time. try it once you will agree. It might cost about 8 bucks a can but it is worth every penny.

@tedski6318 Год назад

What kind of wood.

@johncard7203 6 лет назад

I didn't see that you reattached the boards to the frame and the angle on the back looked like you only screwed it into the boards, not the frame. I'm just concerned that the boards could potentially come loose when hitting large bumps in the road.

@StoneandSonsWorkshop 6 лет назад

+John Card I mentioned adding screws to the bottom center of the boards through existing holes, but the underside of the back I added washers and screws to the angle iron. So, everything is secured.

@johncard7203 6 лет назад

Stone and Sons Workshop Ok, just wanted to make sure all was secure.

@coloringoutsidethelines9755 6 лет назад

Why wouldn't you Por15 or at least Rustoleum the frame before attaching the boards? Lots of rust on those cross bars!

@StoneandSonsWorkshop 6 лет назад

+Trey Horsey it may look bad, but it’s really not. I did look at everything to make sure there wasn’t any serious issues. There’s a lot I COULD do, but at this point I’m just interested in a new floor.

@waynewilliams5802 4 года назад

He seemed like a nice guy but he aint no Bob Villa.

@smsteger89 2 года назад

Never use por15, you cannot stop rust without getting rid of it first. Painting over it will never stop it. The only way to stop rust is by removing it. Rust is a chemical reaction and once it has started it is too late. You have to remove it, then prime the bare metal, then paint/seal over the primer. Por15 is a gimmick.

@M70ACARRY 3 года назад

Don't space wet wood. When it dries, the space will widen further.

@cfbarnett Год назад

kiln dried wood shouldn't shrink much

@smsteger89 2 года назад

You should be using heavy duty lags, and you should do it at every cross member on every board. I have worked for several construction companies that haul heavy equipment and with a trailer like this you need to secure the board at every cross member. I get that maybe you don't haul as heavy of material but if you ever sell it that's something to keep in mind.

@deepmarsh 2 года назад

What is the reason they need to be screwed in every cross bar?

@warrenmichael918 Год назад

@@deepmarsh they dont, not on this light duty of a trailer but the reason people screw them at each or a few of the cross members is to keep the boards from moving and warping. Either bowing up or bending in a curve since they arent screwed down. The only thing i noticed was that rear angle iron he screwed the 3 screws to, it wasnt attached to the trailer frame so i wonder if all the boards could bounce up in the back

@joxzay8519 4 года назад

Can I use a trailer like this one to carry wood for a fencing job ?

@josephmccaslin1513 4 года назад

Duh

@bradhartsoe9128 Год назад

Where did you buy the screws to attach decking?

@cfbarnett Год назад

Brad, did you find screws? I'm looking at torque's head black screws that can be had from Tacoma screw and fastener. They are self tapping so pre drill and run them in.

@bradhartsoe9128 Год назад

@@cfbarnett yes, thank you !