V-Carving Photos in Carveco Maker

Подписаться 10 тыс.

Просмотров 32 тыс.

50% 1

In this Carveco Maker tutorial we will show you how to V-Carve photographs to create a visually stunning effect with very little effort. This tutorial will explain what to do and what not to do in order to get the best result possible and do your photos justice!
Bookmarks:
00:00 - Introduction
04:10 - Dimensions and Resolution
05:49 - Importing and Image
06:37 - Resizing the Image
09:01 - Setting the Height of the Image
10:40 - Smoothing
11:47 - Resizing the Model
13:55 - Machine Relief Toolpath
14:10 - Finishing Tool
16:55 - Stepover
18:40 - Adding Depth Colour and Material
19:44 - Example of Poor Stepover
21:30 - Machining inside Selected Vectors
23:30 - Saving and Exporting the Design
For more information, please visit our website: www.carveco.com
Check out our tutorials, help and advice section here: carveco.com/support
Our social medias:
Facebook - / askcarveco
Instagram - / askcarveco
Twitter - / askcarveco
If there's anything you're still not sure about, let us know down in the comment section or contact us directly and our support team will be with you immediately. If there is anything you think we should do a video about, let us know in the comment section as well! We would love to know what you guys think!
______________________________________________________________________________________________
#Carveco #CNC #cncclipart #cncsoftware #cnctutorial #maker #makertutorial #carvecosoftware #vector #cnctoolpath #machining #hobbycnc #woodworking #engineering #CAD #CAM

Опубликовано:

22 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 57

@stevenrichardson7882 4 года назад

Glad I’ve found you as I hope to finish my CNC build soon and get stuck in to some similar projects 👍 Cheers.

@SiCarter Год назад

Great tutorial, as usual, the really interesting take (for me) was being able to import a normal 2d image as a relief, Carveco Maker never ceases to amaze

@ghislainlatulippe6959 4 года назад

Another great tutorial thanks

@henkpunt4159 2 года назад

Great video! Thanks for the clear and detailed explanation!

@prasainjitkumargautam5906 4 месяца назад

Great video! Thank you for this.

@coberg091 7 месяцев назад

This is awesome , thank for sharing.

@JamesDeanDesigns Год назад

Great tutorial.

@nikoanggriawan303 2 года назад

nice.. !!

@jsoffgridhomesteadcommunit9032 3 года назад

Thanks for video..have been watching alot of vids on carveco before making my decision...but from what I have saw so far...im in on carveco maker...? Tho..could u use a ball nose end mill bit that has small diameter tip to do this as well..thank you

@Todestelzer Год назад

Tried to make it work with Fusion360 but it’s a real hazel to get something done. Bought the monthly Carvco maker subscription in the end 😂

@korymichalicek6186 2 месяца назад

So im having a problem im trying to do these pictures and for some reason after doing my home and zeroing i probe and or manual zero, does not matter hit send and my cut starts roughly twice the height of my probe height. Where am i making my error. Carveco had an update and ever since the new update its been messed up, iv tried working on easel and im not having any problems. Import to easel i get the problem so it hase to be an an error in carveco im making or something in the project build out

@promoshowmagic5603 3 месяца назад

👍👍👍👍👍👍👍👍👍👍👍👍

@JohnColgan. 3 года назад

Hi Leighton, very concise demo, not too techy & everything explained well. I would have thought a 20° V bit would have given a finer carve than the 90° ? Would you suggest spraying the wood a colour before carving or Any post carve actions e.g varnish, lacquer to protect the fine details? How about choice of material? You used MDF for the family photo, what about pine, oak, plywood etc?

@Carveco 3 года назад

Hi John, thank you! Yes a 20 deg would give finer results. You could spray the material before carving or spray after carving and sanding off the top for a different type of finish. The choice of material here was completely dependent on what material was sitting around at the time, this was left over from a customer demo and was going to go in the skip!

@NickOz 3 года назад

Very cool. Would it be possible to perform this operation using a spiral pattern instead of straight lines? I'm new to cnc and haven't committed to a particular software package yet as i am waiting for my Onefitity to arrive, but carveco seems very sleek. Is this feature part of the basic Maker package?

@Carveco 3 года назад

Hi Nick. Yes, you can do the same thing using a Spiral strategy in Maker.

@richarnaud7794 3 года назад

THis is a great program. I just have Carveco MAker. No need for anything else right now anyway. Its good for Onefinity Users like me because of the size limitations with Vcarve being 24" x 24"..this has no limitations unless you are making a football field..user friendly.

@michaelcostello906 3 года назад

I tried to do as you suggested and made a vector around the people in the photo I am trying to carve. I did the outside carve at 45 degree and the inside carve at 315 degrees. For the most part, it is doing as it should, but it is also doing a line along the vector. So my people have an outline. Any idea why it is making this?

@Carveco 3 года назад

You may be best sending over the file to support@carveco.com so they can take a look and advise Michael. It is kind of hard to say without even seeing an image of the problem.

@MikeSmith-pc9nr 3 года назад

Just came across this video as I'm looking to use this software, have you tried doing this picture engraving on acrylic?

@henkpunt4159 2 года назад

Has anyone tried thuis yet?

@jimwoodworker4110 2 года назад

Great video. I have 1 question, when you say press F9 to center the picture are you referring to the F9 on the key board or the top row F9. It doesn't matter which one I use neither one works, has no effect when I hit either one.

@Carveco 2 года назад

Sounds like you have the Fn key enabled Jim, have a read through this - softwarekeep.com/help-center/use-function-keys-without-pressing-fn-key-on-windows-10

@jimwoodworker4110 2 года назад

@@Carveco That was the problem. Thank you. You are the best

@michaeljones-nw5hu 4 года назад

I am trying to follow this to learn but you are doing options I can not find. You have a tool box labeled "project" with tools and options I do not have. Also I clicked simulate from top tool bar then reset from toolpath simulation the program freezes in fact several points throughout this it freezes I have reset and started over 5+ times

@Carveco 4 года назад

Hi Michael, sorry to hear about the issues you've been experiencing. Please email our support team via support@carveco.com or raise a ticket through the help centre and our support team will be able to help you further. Please let them know what version of Carveco Maker you're running (For example: Carveco Maker 1.12) and also the specs of your computer (this looks at first glance that it might potentially be a graphics card issue). To view the Project panel, use the top menu and go to 'Window' > 'Toolbars and Docking Windows' > 'Project' or, alternatively 'Window' > 'Reset Layout' prior to opening a model.

@oldiron1400 2 года назад

How do you keep the "project" tab from disappearing. Everytime I start a new project or even open an old one the "project" tab is gone.

@Carveco 2 года назад

Pressing F4 on the keyboard is a quick way to toggle it. Or, you can go to the "Windows" drop down, then "Toolbars and Docking Windows" and then select "Project"

@3s-Woodworking 11 месяцев назад

Constantly rewatching this to ensure I am doing everything right. I noticed that the step down was not discussed. Wouldn't this cause the cut to start at a depth of half the material and also affect the turnout of the carve as its cutting deeper than intended? If so wouldn't this need to be adjusted to the height the image was set at or smaller?

@Carveco 11 месяцев назад

The stepdown doesn't matter too much since it is only 0.040" (1mm) thick, so you can just run it over the top of the material. This is set up so it is 0.040" off the top of the material. If the relief was something like 1" thick, then definitely, would need to discuss stepdown, but the photo v-carve wouldn't work in that case because the relief would be too thick. Remember, the tool cannot go below that relief.

@kennybellew 2 года назад

Following along, but as soon as I select Simulate path, the relief image disappeared and a white background shows. What's happening?

@Carveco 2 года назад

I suspect the white is the simulation Kenny. Without seeing any settings I would guess that the material hasn't been set up or has been set up incorrectly. If you still have problems, send our support team a message - support@carveco.com

@kennybellew 2 года назад

@@Carveco Thanks. I was lost when ctrl-z wouldn't undo the issue. I'll try again.

@kingthree193 Год назад

I know you said can deviate 0.05 and in the past you have tested .118 (3mm) which didn't turn out right. In regards to doing a epoxy inlay on a photo carve would that depth be sufficient. New to both CNC's and epoxy.

@3s-Woodworking Год назад

Anyone figure this out?

@Carveco Год назад

We've not tried a photo v-carve in epoxy yet, but if you do a search for @Timberfalls (Jason Woodruff), on the Facebook Carveco group, I'm pretty sure he has had a lot of success doing these.

@inksliger96 3 года назад

I have a Logitech trackball mouse! do you know what the command is for rotation?

@Carveco 3 года назад

Hi Paul. If you select the View dropdown you can then select "Twiddle View" which will rotate the 3D view.

@inksliger96 3 года назад

thank you

@inksliger96 3 года назад

that was easy!! i was pulling my hair out for weeks. and it was that Simple. thank you for all your videos.

@difalkner 4 года назад

Leighton - I have followed this exactly as you have described and used a photo I have for a test. The photo is 748 pixels square and I set it to V-carve 8 inches square. The toolpath takes a lot longer than yours did to generate and when I save it, using the same settings you did for a start, the file is about 44k. I notice yours is about 1.4k. My file has 1.7 million lines of code. I changed the tolerance from 0.001" to 0.005" and the file is now 255k and about 5,000 lines of code - much better but am I missing something? Why does mine take so long to generate the toolpath - probably 20-30 seconds - and produce such a large file? I have the full blown Carveco and not Maker, in case that makes a difference. Thanks for the videos!!

@Carveco 4 года назад

Hi David, that sounds like a setting somewhere is different. Could you send over the art file to support@carveco.com please and we will take a look at it. If it is too large for email, then use wetranfer to send it. Thanks and thanks for watching!

@Carveco 4 года назад

Hi David, it looks like you are using Raster in the flagship Carveco product rather than Raster (Classic) like in the tutorial, hence the difference in code sizes.

@jpmosher6508 Год назад

Why, during the simulations, did it go from a negative 45 degree angle (Time 19:53), left to right, to a positive 45 degree angle (Time 22:44)? You only mentioned about do the boy and dog one way and the background another.

@Carveco Год назад

Hi there, it is because it is using the selected vector, rather than the whole relief to machine.

@jpmosher6508 Год назад

@@Carveco Did the user choose this or did the AI software make the change? This was not shown or discussed how to do this change.

@Carveco Год назад

@@jpmosher6508 It's just automatically done in the software, that's why it isn't discussed in the video.

@romeond 3 года назад

I didn't quite understand why you use rectangular and than crop it to square, why not just square at the beginning?

@Carveco 3 года назад

No reason Romeo, just a little tip thrown into the mix! :)

@absolutemesquitecreations329 Год назад

when i press f9 on the key board all it does it opens my screensaver

@Justinthawoodshed Год назад

Look for f lock key on keyboard

@absolutemesquitecreations329 Год назад

@@Justinthawoodshed thank you very much. it had been a while since i used windows based computer.

@Carpenters_Canvas Год назад

how about showing us how to do it right

@johnnygraves5509 Год назад

So do you actually know the right way? I didn't see any video tutorials on your channel that is completely empty 🤷

@Carpenters_Canvas Год назад

@@johnnygraves5509 I get what your mean, I meant could he show us how to do it right meaning he said he was just going to go through it fast. It takes a lot of time is all, and I am not a content creator. Although, I do find it easier to just import a picture using the import tool.

@johnnygraves5509 Год назад

No worries I understand what you mean

@Carpenters_Canvas Год назад

@@johnnygraves5509 however if this is your first run with the software, or you're just starting out, I would be happy to help you out, its really frustrating sometimes, so if you ever have any questions, I can do my best to help ya! there have been so many different times where I was trying to figure out how to do something and couldn't I would lose all patience and have to walk away mad lol. I do recommend watching the tutorial videos on carvcos actual site, they are really helpful